[PATCH v7 2/4] pwm: opencores: Add PWM driver support
William Qiu
william.qiu at starfivetech.com
Thu Nov 9 22:20:37 PST 2023
Add Pulse Width Modulation driver support for OpenCores.
Co-developed-by: Hal Feng <hal.feng at starfivetech.com>
Signed-off-by: Hal Feng <hal.feng at starfivetech.com>
Signed-off-by: William Qiu <william.qiu at starfivetech.com>
---
MAINTAINERS | 7 ++
drivers/pwm/Kconfig | 12 ++
drivers/pwm/Makefile | 1 +
drivers/pwm/pwm-ocores.c | 236 +++++++++++++++++++++++++++++++++++++++
4 files changed, 256 insertions(+)
create mode 100644 drivers/pwm/pwm-ocores.c
diff --git a/MAINTAINERS b/MAINTAINERS
index dd5de540ec0b..1861067cf385 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16006,6 +16006,13 @@ F: Documentation/i2c/busses/i2c-ocores.rst
F: drivers/i2c/busses/i2c-ocores.c
F: include/linux/platform_data/i2c-ocores.h
+OPENCORES PWM DRIVER
+M: William Qiu <william.qiu at starfivetech.com>
+M: Hal Feng <hal.feng at starfivetech.com>
+S: Supported
+F: Documentation/devicetree/bindings/pwm/opencores,pwm-ocores.yaml
+F: drivers/pwm/pwm-ocores.c
+
OPENRISC ARCHITECTURE
M: Jonas Bonn <jonas at southpole.se>
M: Stefan Kristiansson <stefan.kristiansson at saunalahti.fi>
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index 8ebcddf91f7b..a9db2d7ab294 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -434,6 +434,18 @@ config PWM_NTXEC
controller found in certain e-book readers designed by the original
design manufacturer Netronix.
+config PWM_OCORES
+ tristate "OpenCores PWM support"
+ depends on HAS_IOMEM && OF
+ depends on COMMON_CLK && RESET_CONTROLLER
+ depends on ARCH_STARFIVE || COMPILE_TEST
+ help
+ If you say yes to this option, support will be included for the
+ OpenCores PWM. For details see https://opencores.org/projects/ptc.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-ocores.
+
config PWM_OMAP_DMTIMER
tristate "OMAP Dual-Mode Timer PWM support"
depends on OF
diff --git a/drivers/pwm/Makefile b/drivers/pwm/Makefile
index c822389c2a24..542b98202153 100644
--- a/drivers/pwm/Makefile
+++ b/drivers/pwm/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_PWM_MICROCHIP_CORE) += pwm-microchip-core.o
obj-$(CONFIG_PWM_MTK_DISP) += pwm-mtk-disp.o
obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
obj-$(CONFIG_PWM_NTXEC) += pwm-ntxec.o
+obj-$(CONFIG_PWM_OCORES) += pwm-ocores.o
obj-$(CONFIG_PWM_OMAP_DMTIMER) += pwm-omap-dmtimer.o
obj-$(CONFIG_PWM_PCA9685) += pwm-pca9685.o
obj-$(CONFIG_PWM_PXA) += pwm-pxa.o
diff --git a/drivers/pwm/pwm-ocores.c b/drivers/pwm/pwm-ocores.c
new file mode 100644
index 000000000000..4b98a152da94
--- /dev/null
+++ b/drivers/pwm/pwm-ocores.c
@@ -0,0 +1,236 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * OpenCores PWM Driver
+ *
+ * https://opencores.org/projects/ptc
+ *
+ * Copyright (C) 2018-2023 StarFive Technology Co., Ltd.
+ *
+ * Limitations:
+ * - The hardware only do inverted polarity.
+ * - The hardware minimum period / duty_cycle is (1 / pwm_apb clock frequency) ns.
+ * - The hardware maximum period / duty_cycle is (U32_MAX / pwm_apb clock frequency) ns.
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pwm.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+
+/* OCPWM_CTRL register bits*/
+#define REG_OCPWM_EN BIT(0)
+#define REG_OCPWM_ECLK BIT(1)
+#define REG_OCPWM_NEC BIT(2)
+#define REG_OCPWM_OE BIT(3)
+#define REG_OCPWM_SIGNLE BIT(4)
+#define REG_OCPWM_INTE BIT(5)
+#define REG_OCPWM_INT BIT(6)
+#define REG_OCPWM_CNTRRST BIT(7)
+#define REG_OCPWM_CAPTE BIT(8)
+
+struct ocores_pwm_device {
+ struct pwm_chip chip;
+ struct clk *clk;
+ struct reset_control *rst;
+ const struct ocores_pwm_data *data;
+ void __iomem *regs;
+ u32 clk_rate; /* PWM APB clock frequency */
+};
+
+struct ocores_pwm_data {
+ void __iomem *(*get_ch_base)(void __iomem *base, unsigned int channel);
+};
+
+static inline u32 ocores_readl(struct ocores_pwm_device *ddata,
+ unsigned int channel,
+ unsigned int offset)
+{
+ void __iomem *base = ddata->data->get_ch_base ?
+ ddata->data->get_ch_base(ddata->regs, channel) : ddata->regs;
+
+ return readl(base + offset);
+}
+
+static inline void ocores_writel(struct ocores_pwm_device *ddata,
+ unsigned int channel,
+ unsigned int offset, u32 val)
+{
+ void __iomem *base = ddata->data->get_ch_base ?
+ ddata->data->get_ch_base(ddata->regs, channel) : ddata->regs;
+
+ writel(val, base + offset);
+}
+
+static inline struct ocores_pwm_device *chip_to_ocores(struct pwm_chip *chip)
+{
+ return container_of(chip, struct ocores_pwm_device, chip);
+}
+
+static void __iomem *starfive_jh71x0_get_ch_base(void __iomem *base,
+ unsigned int channel)
+{
+ unsigned int offset = (channel > 3 ? 1 << 15 : 0) + (channel & 3) * 0x10;
+
+ return base + offset;
+}
+
+static int ocores_pwm_get_state(struct pwm_chip *chip,
+ struct pwm_device *pwm,
+ struct pwm_state *state)
+{
+ struct ocores_pwm_device *ddata = chip_to_ocores(chip);
+ u32 period_data, duty_data, ctrl_data;
+
+ period_data = ocores_readl(ddata, pwm->hwpwm, 0x8);
+ duty_data = ocores_readl(ddata, pwm->hwpwm, 0x4);
+ ctrl_data = ocores_readl(ddata, pwm->hwpwm, 0xC);
+
+ state->period = DIV_ROUND_UP_ULL((u64)period_data * NSEC_PER_SEC, ddata->clk_rate);
+ state->duty_cycle = DIV_ROUND_UP_ULL((u64)duty_data * NSEC_PER_SEC, ddata->clk_rate);
+ state->polarity = PWM_POLARITY_INVERSED;
+ state->enabled = (ctrl_data & REG_OCPWM_EN) ? true : false;
+
+ return 0;
+}
+
+static int ocores_pwm_apply(struct pwm_chip *chip,
+ struct pwm_device *pwm,
+ const struct pwm_state *state)
+{
+ struct ocores_pwm_device *ddata = chip_to_ocores(chip);
+ u32 ctrl_data = 0;
+ u64 period_data, duty_data;
+
+ if (state->polarity != PWM_POLARITY_INVERSED)
+ return -EINVAL;
+
+ ctrl_data = ocores_readl(ddata, pwm->hwpwm, 0xC);
+ ocores_writel(ddata, pwm->hwpwm, 0xC, 0);
+
+ period_data = DIV_ROUND_DOWN_ULL(state->period * ddata->clk_rate, NSEC_PER_SEC);
+ if (period_data <= U32_MAX)
+ ocores_writel(ddata, pwm->hwpwm, 0x8, (u32)period_data);
+ else
+ return -EINVAL;
+
+ duty_data = DIV_ROUND_DOWN_ULL(state->duty_cycle * ddata->clk_rate, NSEC_PER_SEC);
+ if (duty_data <= U32_MAX)
+ ocores_writel(ddata, pwm->hwpwm, 0x4, (u32)duty_data);
+ else
+ return -EINVAL;
+
+ ocores_writel(ddata, pwm->hwpwm, 0xC, 0);
+
+ if (state->enabled) {
+ ctrl_data = ocores_readl(ddata, pwm->hwpwm, 0xC);
+ ocores_writel(ddata, pwm->hwpwm, 0xC, ctrl_data | REG_OCPWM_EN | REG_OCPWM_OE);
+ }
+
+ return 0;
+}
+
+static const struct pwm_ops ocores_pwm_ops = {
+ .get_state = ocores_pwm_get_state,
+ .apply = ocores_pwm_apply,
+};
+
+static const struct ocores_pwm_data jh7100_pwm_data = {
+ .get_ch_base = starfive_jh71x0_get_ch_base,
+};
+
+static const struct ocores_pwm_data jh7110_pwm_data = {
+ .get_ch_base = starfive_jh71x0_get_ch_base,
+};
+
+static const struct of_device_id ocores_pwm_of_match[] = {
+ { .compatible = "opencores,pwm" },
+ { .compatible = "starfive,jh7100-pwm", .data = &jh7100_pwm_data},
+ { .compatible = "starfive,jh7110-pwm", .data = &jh7110_pwm_data},
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, ocores_pwm_of_match);
+
+static int ocores_pwm_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *id;
+ struct device *dev = &pdev->dev;
+ struct ocores_pwm_device *ddata;
+ struct pwm_chip *chip;
+ int ret;
+
+ id = of_match_device(ocores_pwm_of_match, dev);
+ if (!id)
+ return -EINVAL;
+
+ ddata = devm_kzalloc(dev, sizeof(*ddata), GFP_KERNEL);
+ if (!ddata)
+ return -ENOMEM;
+
+ ddata->data = id->data;
+ chip = &ddata->chip;
+ chip->dev = dev;
+ chip->ops = &ocores_pwm_ops;
+ chip->npwm = 8;
+ chip->of_pwm_n_cells = 3;
+
+ ddata->regs = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(ddata->regs))
+ return dev_err_probe(dev, PTR_ERR(ddata->regs),
+ "Unable to map IO resources\n");
+
+ ddata->clk = devm_clk_get(dev, NULL);
+ if (IS_ERR(ddata->clk))
+ return dev_err_probe(dev, PTR_ERR(ddata->clk),
+ "Unable to get pwm's clock\n");
+
+ ret = clk_prepare_enable(ddata->clk);
+ if (ret)
+ return dev_err_probe(dev, ret, "Clock enable failed\n");
+
+ ddata->rst = devm_reset_control_get_optional_exclusive(dev, NULL);
+ reset_control_deassert(ddata->rst);
+
+ ddata->clk_rate = clk_get_rate(ddata->clk);
+ if (ddata->clk_rate <= 0)
+ return dev_err_probe(dev, ddata->clk_rate,
+ "Unable to get clock's rate\n");
+
+ ret = devm_pwmchip_add(dev, chip);
+ if (ret < 0) {
+ dev_err_probe(dev, ret, "Could not register PWM chip\n");
+ clk_disable_unprepare(ddata->clk);
+ reset_control_assert(ddata->rst);
+ }
+
+ platform_set_drvdata(pdev, ddata);
+
+ return ret;
+}
+
+static void ocores_pwm_remove(struct platform_device *dev)
+{
+ struct ocores_pwm_device *ddata = platform_get_drvdata(dev);
+
+ reset_control_assert(ddata->rst);
+ clk_disable_unprepare(ddata->clk);
+}
+
+static struct platform_driver ocores_pwm_driver = {
+ .probe = ocores_pwm_probe,
+ .remove_new = ocores_pwm_remove,
+ .driver = {
+ .name = "ocores-pwm",
+ .of_match_table = ocores_pwm_of_match,
+ },
+};
+module_platform_driver(ocores_pwm_driver);
+
+MODULE_AUTHOR("Jieqin Chen");
+MODULE_AUTHOR("Hal Feng <hal.feng at starfivetech.com>");
+MODULE_DESCRIPTION("OpenCores PWM PTC driver");
+MODULE_LICENSE("GPL");
--
2.34.1
More information about the linux-riscv
mailing list