[PATCH 5/7] cpufreq/cppc: Move and rename cppc_cpufreq_{perf_to_khz|khz_to_perf}
Vincent Guittot
vincent.guittot at linaro.org
Sat Nov 4 03:59:05 PDT 2023
Move and rename cppc_cpufreq_perf_to_khz and cppc_cpufreq_khz_to_perf to
use them outside cppc_cpufreq in topology_init_cpu_capacity_cppc().
Modify the interface to use struct cppc_perf_caps *caps instead of
struct cppc_cpudata *cpu_data as we only use the fields of cppc_perf_caps.
cppc_cpufreq was converting the lowest and nominal freq from MHz to kHz
before using them. We move this conversion inside cppc_perf_to_khz and
cppc_khz_to_perf to make them generic and usable outside cppc_cpufreq.
No functional change
Signed-off-by: Vincent Guittot <vincent.guittot at linaro.org>
---
drivers/acpi/cppc_acpi.c | 104 ++++++++++++++++++++++++
drivers/cpufreq/cppc_cpufreq.c | 139 ++++-----------------------------
include/acpi/cppc_acpi.h | 2 +
3 files changed, 123 insertions(+), 122 deletions(-)
diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
index 7ff269a78c20..d155a86a8614 100644
--- a/drivers/acpi/cppc_acpi.c
+++ b/drivers/acpi/cppc_acpi.c
@@ -39,6 +39,9 @@
#include <linux/rwsem.h>
#include <linux/wait.h>
#include <linux/topology.h>
+#include <linux/dmi.h>
+#include <linux/units.h>
+#include <asm/unaligned.h>
#include <acpi/cppc_acpi.h>
@@ -1760,3 +1763,104 @@ unsigned int cppc_get_transition_latency(int cpu_num)
return latency_ns;
}
EXPORT_SYMBOL_GPL(cppc_get_transition_latency);
+
+/* Minimum struct length needed for the DMI processor entry we want */
+#define DMI_ENTRY_PROCESSOR_MIN_LENGTH 48
+
+/* Offset in the DMI processor structure for the max frequency */
+#define DMI_PROCESSOR_MAX_SPEED 0x14
+
+/* Callback function used to retrieve the max frequency from DMI */
+static void cppc_find_dmi_mhz(const struct dmi_header *dm, void *private)
+{
+ const u8 *dmi_data = (const u8 *)dm;
+ u16 *mhz = (u16 *)private;
+
+ if (dm->type == DMI_ENTRY_PROCESSOR &&
+ dm->length >= DMI_ENTRY_PROCESSOR_MIN_LENGTH) {
+ u16 val = (u16)get_unaligned((const u16 *)
+ (dmi_data + DMI_PROCESSOR_MAX_SPEED));
+ *mhz = val > *mhz ? val : *mhz;
+ }
+}
+
+/* Look up the max frequency in DMI */
+static u64 cppc_get_dmi_max_khz(void)
+{
+ u16 mhz = 0;
+
+ dmi_walk(cppc_find_dmi_mhz, &mhz);
+
+ /*
+ * Real stupid fallback value, just in case there is no
+ * actual value set.
+ */
+ mhz = mhz ? mhz : 1;
+
+ return KHZ_PER_MHZ * mhz;
+}
+
+/*
+ * If CPPC lowest_freq and nominal_freq registers are exposed then we can
+ * use them to convert perf to freq and vice versa. The conversion is
+ * extrapolated as an affine function passing by the 2 points:
+ * - (Low perf, Low freq)
+ * - (Nominal perf, Nominal freq)
+ */
+unsigned int cppc_perf_to_khz(struct cppc_perf_caps *caps, unsigned int perf)
+{
+ s64 retval, offset = 0;
+ static u64 max_khz;
+ u64 mul, div;
+
+ if (caps->lowest_freq && caps->nominal_freq) {
+ mul = caps->nominal_freq - caps->lowest_freq;
+ mul *= KHZ_PER_MHZ;
+ div = caps->nominal_perf - caps->lowest_perf;
+ offset = caps->nominal_freq * KHZ_PER_MHZ -
+ div64_u64(caps->nominal_perf * mul, div);
+ } else {
+ if (!max_khz)
+ max_khz = cppc_get_dmi_max_khz();
+ mul = max_khz;
+ div = caps->highest_perf;
+ }
+
+ retval = offset + div64_u64(perf * mul, div);
+ if (retval >= 0)
+ return retval;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cppc_perf_to_khz);
+
+unsigned int cppc_khz_to_perf(struct cppc_perf_caps *caps, unsigned int freq)
+{
+ s64 retval, offset = 0;
+ static u64 max_khz;
+ u64 mul, div;
+
+ if (caps->lowest_freq && caps->nominal_freq) {
+ mul = caps->nominal_perf - caps->lowest_perf;
+ div = caps->nominal_freq - caps->lowest_freq;
+ /*
+ * We don't need to convert to kHz for computing offset and can
+ * directly use nominal_freq and lowest_freq as the div64_u64
+ * will remove the frequency unit.
+ */
+ offset = caps->nominal_perf -
+ div64_u64(caps->nominal_freq * mul, div);
+ /* But we need it for computing the perf level. */
+ div *= KHZ_PER_MHZ;
+ } else {
+ if (!max_khz)
+ max_khz = cppc_get_dmi_max_khz();
+ mul = caps->highest_perf;
+ div = max_khz;
+ }
+
+ retval = offset + div64_u64(freq * mul, div);
+ if (retval >= 0)
+ return retval;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(cppc_khz_to_perf);
diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c
index fe08ca419b3d..64420d9cfd1e 100644
--- a/drivers/cpufreq/cppc_cpufreq.c
+++ b/drivers/cpufreq/cppc_cpufreq.c
@@ -16,7 +16,6 @@
#include <linux/delay.h>
#include <linux/cpu.h>
#include <linux/cpufreq.h>
-#include <linux/dmi.h>
#include <linux/irq_work.h>
#include <linux/kthread.h>
#include <linux/time.h>
@@ -27,12 +26,6 @@
#include <acpi/cppc_acpi.h>
-/* Minimum struct length needed for the DMI processor entry we want */
-#define DMI_ENTRY_PROCESSOR_MIN_LENGTH 48
-
-/* Offset in the DMI processor structure for the max frequency */
-#define DMI_PROCESSOR_MAX_SPEED 0x14
-
/*
* This list contains information parsed from per CPU ACPI _CPC and _PSD
* structures: e.g. the highest and lowest supported performance, capabilities,
@@ -291,97 +284,9 @@ static inline void cppc_freq_invariance_exit(void)
}
#endif /* CONFIG_ACPI_CPPC_CPUFREQ_FIE */
-/* Callback function used to retrieve the max frequency from DMI */
-static void cppc_find_dmi_mhz(const struct dmi_header *dm, void *private)
-{
- const u8 *dmi_data = (const u8 *)dm;
- u16 *mhz = (u16 *)private;
-
- if (dm->type == DMI_ENTRY_PROCESSOR &&
- dm->length >= DMI_ENTRY_PROCESSOR_MIN_LENGTH) {
- u16 val = (u16)get_unaligned((const u16 *)
- (dmi_data + DMI_PROCESSOR_MAX_SPEED));
- *mhz = val > *mhz ? val : *mhz;
- }
-}
-
-/* Look up the max frequency in DMI */
-static u64 cppc_get_dmi_max_khz(void)
-{
- u16 mhz = 0;
-
- dmi_walk(cppc_find_dmi_mhz, &mhz);
-
- /*
- * Real stupid fallback value, just in case there is no
- * actual value set.
- */
- mhz = mhz ? mhz : 1;
-
- return (1000 * mhz);
-}
-
-/*
- * If CPPC lowest_freq and nominal_freq registers are exposed then we can
- * use them to convert perf to freq and vice versa. The conversion is
- * extrapolated as an affine function passing by the 2 points:
- * - (Low perf, Low freq)
- * - (Nominal perf, Nominal perf)
- */
-static unsigned int cppc_cpufreq_perf_to_khz(struct cppc_cpudata *cpu_data,
- unsigned int perf)
-{
- struct cppc_perf_caps *caps = &cpu_data->perf_caps;
- s64 retval, offset = 0;
- static u64 max_khz;
- u64 mul, div;
-
- if (caps->lowest_freq && caps->nominal_freq) {
- mul = caps->nominal_freq - caps->lowest_freq;
- div = caps->nominal_perf - caps->lowest_perf;
- offset = caps->nominal_freq - div64_u64(caps->nominal_perf * mul, div);
- } else {
- if (!max_khz)
- max_khz = cppc_get_dmi_max_khz();
- mul = max_khz;
- div = caps->highest_perf;
- }
-
- retval = offset + div64_u64(perf * mul, div);
- if (retval >= 0)
- return retval;
- return 0;
-}
-
-static unsigned int cppc_cpufreq_khz_to_perf(struct cppc_cpudata *cpu_data,
- unsigned int freq)
-{
- struct cppc_perf_caps *caps = &cpu_data->perf_caps;
- s64 retval, offset = 0;
- static u64 max_khz;
- u64 mul, div;
-
- if (caps->lowest_freq && caps->nominal_freq) {
- mul = caps->nominal_perf - caps->lowest_perf;
- div = caps->nominal_freq - caps->lowest_freq;
- offset = caps->nominal_perf - div64_u64(caps->nominal_freq * mul, div);
- } else {
- if (!max_khz)
- max_khz = cppc_get_dmi_max_khz();
- mul = caps->highest_perf;
- div = max_khz;
- }
-
- retval = offset + div64_u64(freq * mul, div);
- if (retval >= 0)
- return retval;
- return 0;
-}
-
static int cppc_cpufreq_set_target(struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation)
-
{
struct cppc_cpudata *cpu_data = policy->driver_data;
unsigned int cpu = policy->cpu;
@@ -389,7 +294,7 @@ static int cppc_cpufreq_set_target(struct cpufreq_policy *policy,
u32 desired_perf;
int ret = 0;
- desired_perf = cppc_cpufreq_khz_to_perf(cpu_data, target_freq);
+ desired_perf = cppc_khz_to_perf(&cpu_data->perf_caps, target_freq);
/* Return if it is exactly the same perf */
if (desired_perf == cpu_data->perf_ctrls.desired_perf)
return ret;
@@ -417,7 +322,7 @@ static unsigned int cppc_cpufreq_fast_switch(struct cpufreq_policy *policy,
u32 desired_perf;
int ret;
- desired_perf = cppc_cpufreq_khz_to_perf(cpu_data, target_freq);
+ desired_perf = cppc_khz_to_perf(&cpu_data->perf_caps, target_freq);
cpu_data->perf_ctrls.desired_perf = desired_perf;
ret = cppc_set_perf(cpu, &cpu_data->perf_ctrls);
@@ -530,7 +435,7 @@ static int cppc_get_cpu_power(struct device *cpu_dev,
min_step = min_cap / CPPC_EM_CAP_STEP;
max_step = max_cap / CPPC_EM_CAP_STEP;
- perf_prev = cppc_cpufreq_khz_to_perf(cpu_data, *KHz);
+ perf_prev = cppc_khz_to_perf(perf_caps, *KHz);
step = perf_prev / perf_step;
if (step > max_step)
@@ -550,8 +455,8 @@ static int cppc_get_cpu_power(struct device *cpu_dev,
perf = step * perf_step;
}
- *KHz = cppc_cpufreq_perf_to_khz(cpu_data, perf);
- perf_check = cppc_cpufreq_khz_to_perf(cpu_data, *KHz);
+ *KHz = cppc_perf_to_khz(perf_caps, perf);
+ perf_check = cppc_khz_to_perf(perf_caps, *KHz);
step_check = perf_check / perf_step;
/*
@@ -561,8 +466,8 @@ static int cppc_get_cpu_power(struct device *cpu_dev,
*/
while ((*KHz == prev_freq) || (step_check != step)) {
perf++;
- *KHz = cppc_cpufreq_perf_to_khz(cpu_data, perf);
- perf_check = cppc_cpufreq_khz_to_perf(cpu_data, *KHz);
+ *KHz = cppc_perf_to_khz(perf_caps, perf);
+ perf_check = cppc_khz_to_perf(perf_caps, *KHz);
step_check = perf_check / perf_step;
}
@@ -591,7 +496,7 @@ static int cppc_get_cpu_cost(struct device *cpu_dev, unsigned long KHz,
perf_caps = &cpu_data->perf_caps;
max_cap = arch_scale_cpu_capacity(cpu_dev->id);
- perf_prev = cppc_cpufreq_khz_to_perf(cpu_data, KHz);
+ perf_prev = cppc_khz_to_perf(perf_caps, KHz);
perf_step = CPPC_EM_CAP_STEP * perf_caps->highest_perf / max_cap;
step = perf_prev / perf_step;
@@ -679,10 +584,6 @@ static struct cppc_cpudata *cppc_cpufreq_get_cpu_data(unsigned int cpu)
goto free_mask;
}
- /* Convert the lowest and nominal freq from MHz to KHz */
- cpu_data->perf_caps.lowest_freq *= 1000;
- cpu_data->perf_caps.nominal_freq *= 1000;
-
list_add(&cpu_data->node, &cpu_data_list);
return cpu_data;
@@ -724,20 +625,16 @@ static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy)
* Set min to lowest nonlinear perf to avoid any efficiency penalty (see
* Section 8.4.7.1.1.5 of ACPI 6.1 spec)
*/
- policy->min = cppc_cpufreq_perf_to_khz(cpu_data,
- caps->lowest_nonlinear_perf);
- policy->max = cppc_cpufreq_perf_to_khz(cpu_data,
- caps->nominal_perf);
+ policy->min = cppc_perf_to_khz(caps, caps->lowest_nonlinear_perf);
+ policy->max = cppc_perf_to_khz(caps, caps->nominal_perf);
/*
* Set cpuinfo.min_freq to Lowest to make the full range of performance
* available if userspace wants to use any perf between lowest & lowest
* nonlinear perf
*/
- policy->cpuinfo.min_freq = cppc_cpufreq_perf_to_khz(cpu_data,
- caps->lowest_perf);
- policy->cpuinfo.max_freq = cppc_cpufreq_perf_to_khz(cpu_data,
- caps->nominal_perf);
+ policy->cpuinfo.min_freq = cppc_perf_to_khz(caps, caps->lowest_perf);
+ policy->cpuinfo.max_freq = cppc_perf_to_khz(caps, caps->nominal_perf);
policy->transition_delay_us = cppc_cpufreq_get_transition_delay_us(cpu);
policy->shared_type = cpu_data->shared_type;
@@ -773,7 +670,7 @@ static int cppc_cpufreq_cpu_init(struct cpufreq_policy *policy)
boost_supported = true;
/* Set policy->cur to max now. The governors will adjust later. */
- policy->cur = cppc_cpufreq_perf_to_khz(cpu_data, caps->highest_perf);
+ policy->cur = cppc_perf_to_khz(caps, caps->highest_perf);
cpu_data->perf_ctrls.desired_perf = caps->highest_perf;
ret = cppc_set_perf(cpu, &cpu_data->perf_ctrls);
@@ -863,7 +760,7 @@ static unsigned int cppc_cpufreq_get_rate(unsigned int cpu)
delivered_perf = cppc_perf_from_fbctrs(cpu_data, &fb_ctrs_t0,
&fb_ctrs_t1);
- return cppc_cpufreq_perf_to_khz(cpu_data, delivered_perf);
+ return cppc_perf_to_khz(&cpu_data->perf_caps, delivered_perf);
}
static int cppc_cpufreq_set_boost(struct cpufreq_policy *policy, int state)
@@ -878,11 +775,9 @@ static int cppc_cpufreq_set_boost(struct cpufreq_policy *policy, int state)
}
if (state)
- policy->max = cppc_cpufreq_perf_to_khz(cpu_data,
- caps->highest_perf);
+ policy->max = cppc_perf_to_khz(caps, caps->highest_perf);
else
- policy->max = cppc_cpufreq_perf_to_khz(cpu_data,
- caps->nominal_perf);
+ policy->max = cppc_perf_to_khz(caps, caps->nominal_perf);
policy->cpuinfo.max_freq = policy->max;
ret = freq_qos_update_request(policy->max_freq_req, policy->max);
@@ -937,7 +832,7 @@ static unsigned int hisi_cppc_cpufreq_get_rate(unsigned int cpu)
if (ret < 0)
return -EIO;
- return cppc_cpufreq_perf_to_khz(cpu_data, desired_perf);
+ return cppc_perf_to_khz(&cpu_data->perf_caps, desired_perf);
}
static void cppc_check_hisi_workaround(void)
diff --git a/include/acpi/cppc_acpi.h b/include/acpi/cppc_acpi.h
index 6126c977ece0..3a0995f8bce8 100644
--- a/include/acpi/cppc_acpi.h
+++ b/include/acpi/cppc_acpi.h
@@ -144,6 +144,8 @@ extern int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls);
extern int cppc_set_enable(int cpu, bool enable);
extern int cppc_get_perf_caps(int cpu, struct cppc_perf_caps *caps);
extern bool cppc_perf_ctrs_in_pcc(void);
+extern unsigned int cppc_perf_to_khz(struct cppc_perf_caps *caps, unsigned int perf);
+extern unsigned int cppc_khz_to_perf(struct cppc_perf_caps *caps, unsigned int freq);
extern bool acpi_cpc_valid(void);
extern bool cppc_allow_fast_switch(void);
extern int acpi_get_psd_map(unsigned int cpu, struct cppc_cpudata *cpu_data);
--
2.34.1
More information about the linux-riscv
mailing list