[PATCH -fixes] riscv: Fix relocatable kernels with early alternatives using -fno-pie

[Conor Dooley]

On Sat, May 27, 2023 at 11:13:18AM +0200, Alexandre Ghiti wrote:
> 
> On 26/05/2023 18:35, Conor Dooley wrote:
> > On Fri, May 26, 2023 at 05:24:41PM +0100, Conor Dooley wrote:
> > > On Fri, May 26, 2023 at 05:46:30PM +0200, Alexandre Ghiti wrote:
> > > > Early alternatives are called with the mmu disabled, and then should not
> > > > access any global symbols through the GOT since it requires relocations,
> > > > relocations that we do before but *virtually*. So only use medany code
> > > > model for this early code.
> > > > 
> > > > Signed-off-by: Alexandre Ghiti <alexghiti at rivosinc.com>
> > > > ---
> > > > 
> > > > Note that I'm not very happy with this fix, I think we need to put more
> > > > effort into "harmonizing" this very early code (ie before the mmu is
> > > > enabled) as it is spread between different locations and compiled
> > > > differently.
> > > Totally & I'll happily spend the time trying to review that work.
> > > 
> > > > I'll work on that later, but for now, this fix does what is
> > > > needed to work (from my testing at least). Any Tested-by on the Unmatched
> > > > and T-head boards is welcome!
> > > On 6.4-rc1 & v6.4-rc1 + this patch, with CONFIG_RELOCATABLE added to my
> > > config, my Nezha fails to boot. There is no output whatsoever from the
> > > kernel. Turning off CONFIG_RELOCATABLE boots again.
> > I don't know if this is better or worse news, but same thing happens on
> > an icicle kit. What systems, other than QEMU, has the relocatable
> > eries been tested with, btw?
> 
> 
> I tested it on the Unmatched (Andreas did too).

Cool. I cracked out my unmatched and it has the same issue as the
icicle. Ditto my Visionfive v2. Here's my config.
https://raw.githubusercontent.com/ConchuOD/riscv-env/dev/conf/defconfig

A ~default qemu virt doesn't work either. (-m 2G -smp 5)

> Very weird it does not work on the icicle kit, there is no errata for this
> soc, so what gets executed this early for this soc? Do you know where it
> fails to boot? If you can debug, you should break on the address of the
> entry point (usually 0x8020_0000) since this is the stvec address, so when
> you get a trap, you will branch there, and then could you dump $sepc, $ra
> and $stval when you get there?

> Regarding the thead issue, I think the following should fix it:

It did not :/

Cheers,
Conor.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20230527/5fb27a91/attachment.sig>