[PATCH v6 09/11] riscv: dts: starfive: jh7110: add pmu controller node
Xingyu Wu
xingyu.wu at starfivetech.com
Thu May 18 03:12:32 PDT 2023
From: Walker Chen <walker.chen at starfivetech.com>
Add the pmu controller node for the Starfive JH7110 SoC. The PMU needs
to be used by other modules such as VPU, ISP, etc.
Signed-off-by: Walker Chen <walker.chen at starfivetech.com>
---
arch/riscv/boot/dts/starfive/jh7110.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 4c5fdb905da8..30e1f34d5cf8 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -496,5 +496,12 @@ aongpio: pinctrl at 17020000 {
gpio-controller;
#gpio-cells = <2>;
};
+
+ pwrc: power-controller at 17030000 {
+ compatible = "starfive,jh7110-pmu";
+ reg = <0x0 0x17030000 0x0 0x10000>;
+ interrupts = <111>;
+ #power-domain-cells = <1>;
+ };
};
};
--
2.25.1
More information about the linux-riscv
mailing list