[PATCH v3 5/5] riscv: dts: starfive: jh7110: Add AON PMU node
Changhuang Liang
changhuang.liang at starfivetech.com
Tue May 9 18:53:11 PDT 2023
Add AON PMU node to configure power. It can be used to turn on/off dphy
rx/tx power switch. It also can use syscon operation.
Reviewed-by: Walker Chen <walker.chen at starfivetech.com>
Signed-off-by: Changhuang Liang <changhuang.liang at starfivetech.com>
---
arch/riscv/boot/dts/starfive/jh7110.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 4c5fdb905da8..d31257d4dcfc 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -486,6 +486,12 @@ aoncrg: clock-controller at 17000000 {
#reset-cells = <1>;
};
+ aon_syscon: syscon at 17010000 {
+ compatible = "starfive,jh7110-aon-syscon", "syscon";
+ reg = <0x0 0x17010000 0x0 0x1000>;
+ #power-domain-cells = <1>;
+ };
+
aongpio: pinctrl at 17020000 {
compatible = "starfive,jh7110-aon-pinctrl";
reg = <0x0 0x17020000 0x0 0x10000>;
--
2.25.1
More information about the linux-riscv
mailing list