[PATCH v3 3/3] riscv: dts: starfive: add tdm node and sound card

Walker Chen walker.chen at starfivetech.com
Tue May 9 05:52:48 PDT 2023


Hi Conor/Emil,

DT overlay is used to describe combinations of VF2 and hat. Do you have any comments on this patch ?
Thanks!

Best regards,
Walker

On 2023/5/6 17:01, Walker Chen wrote:
> Add the tdm controller node and sound card for the StarFive JH7110 SoC.
> 
> Signed-off-by: Walker Chen <walker.chen at starfivetech.com>
> ---
>  arch/riscv/boot/dts/starfive/Makefile         |  3 +
>  .../jh7110-starfive-visionfive-2-wm8960.dtso  | 70 +++++++++++++++++++
>  .../jh7110-starfive-visionfive-2.dtsi         | 40 +++++++++++
>  arch/riscv/boot/dts/starfive/jh7110.dtsi      | 21 ++++++
>  4 files changed, 134 insertions(+)
>  create mode 100644 arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-wm8960.dtso
> 
> diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
> index 170956846d49..644cc29b5be3 100644
> --- a/arch/riscv/boot/dts/starfive/Makefile
> +++ b/arch/riscv/boot/dts/starfive/Makefile
> @@ -4,3 +4,6 @@ dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-starfive-visionfive-v1.dtb
>  
>  dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb
>  dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb
> +
> +jh7110-starfive-visionfive-2-wm8960-dtbs := jh7110-starfive-visionfive-2-v1.3b.dtb jh7110-starfive-visionfive-2-wm8960.dtbo
> +dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-wm8960.dtb
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-wm8960.dtso b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-wm8960.dtso
> new file mode 100644
> index 000000000000..67897f000883
> --- /dev/null
> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2-wm8960.dtso
> @@ -0,0 +1,70 @@
> +// SPDX-License-Identifier: GPL-2.0 OR MIT
> +/*
> + * Copyright (C) 2023 StarFive Technology Co., Ltd.
> + * Author: Walker Chen <walker.chen at starfivetech.com>
> + *
> + * Requires ReSpeaker 2-Mics Pi HAT plugged in 40-pin GPIO header.
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +&{/} {
> +	compatible = "starfive,visionfive-2-v1.3b", "starfive,jh7110";
> +
> +	wm8960_mclk: wm8960-mclk {
> +		compatible = "fixed-clock";
> +		clock-output-names = "wm8960_mclk";
> +		#clock-cells = <0>;
> +		clock-frequency = <24576000>;
> +	};
> +
> +	sound {
> +		compatible = "simple-audio-card";
> +
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		simple-audio-card,name = "Starfive-TDM-Sound-Card";
> +		simple-audio-card,widgets = "Microphone", "Mic Jack",
> +					    "Line", "Line In",
> +					    "Line", "Line Out",
> +					    "Speaker", "Speaker",
> +					    "Headphone", "Headphone Jack";
> +		simple-audio-card,routing = "Headphone Jack", "HP_L",
> +					    "Headphone Jack", "HP_R",
> +					    "Speaker", "SPK_LP",
> +					    "Speaker", "SPK_LN",
> +					    "LINPUT1", "Mic Jack",
> +					    "LINPUT3", "Mic Jack",
> +					    "RINPUT1", "Mic Jack",
> +					    "RINPUT2", "Mic Jack";
> +
> +		simple-audio-card,dai-link at 0 {
> +			reg = <0>;
> +			format = "dsp_a";
> +			bitclock-master = <&dailink_master>;
> +			frame-master = <&dailink_master>;
> +
> +			cpu {
> +				sound-dai = <&tdm>;
> +			};
> +			dailink_master: codec {
> +				sound-dai = <&wm8960>;
> +				clocks = <&wm8960_mclk>;
> +			};
> +		};
> +	};
> +};
> +
> +&i2c0 {
> +	#address-cells = <1>;
> +	#size-cells = <0>;
> +
> +	wm8960: codec at 1a {
> +		compatible = "wlf,wm8960";
> +		reg = <0x1a>;
> +		wlf,shared-lrclk;
> +		#sound-dai-cells = <0>;
> +	};
> +};
> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> index 1155b97b593d..19b5954ee72d 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> @@ -214,6 +214,40 @@
>  			slew-rate = <0>;
>  		};
>  	};
> +
> +	tdm0_pins: tdm0-pins {
> +		tdm0-pins-tx {
> +			pinmux = <GPIOMUX(44, GPOUT_SYS_TDM_TXD,
> +					      GPOEN_ENABLE,
> +					      GPI_NONE)>;
> +			bias-pull-up;
> +			drive-strength = <2>;
> +			input-disable;
> +			input-schmitt-disable;
> +			slew-rate = <0>;
> +		};
> +
> +		tdm0-pins-rx {
> +			pinmux = <GPIOMUX(61, GPOUT_HIGH,
> +					      GPOEN_DISABLE,
> +					      GPI_SYS_TDM_RXD)>;
> +			input-enable;
> +		};
> +
> +		tdm0-pins-sync {
> +			pinmux = <GPIOMUX(63, GPOUT_HIGH,
> +					      GPOEN_DISABLE,
> +					      GPI_SYS_TDM_SYNC)>;
> +			input-enable;
> +		};
> +
> +		tdm0-pins-pcmclk {
> +			pinmux = <GPIOMUX(38, GPOUT_HIGH,
> +					      GPOEN_DISABLE,
> +					      GPI_SYS_TDM_CLK)>;
> +			input-enable;
> +		};
> +	};
>  };
>  
>  &uart0 {
> @@ -221,3 +255,9 @@
>  	pinctrl-0 = <&uart0_pins>;
>  	status = "okay";
>  };
> +
> +&tdm {
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&tdm0_pins>;
> +	status = "okay";
> +};
> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> index 866313570a7e..cfda6fb0d91b 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> @@ -366,6 +366,27 @@
>  			status = "disabled";
>  		};
>  
> +		tdm: tdm at 10090000 {
> +			compatible = "starfive,jh7110-tdm";
> +			reg = <0x0 0x10090000 0x0 0x1000>;
> +			clocks = <&syscrg JH7110_SYSCLK_TDM_AHB>,
> +				 <&syscrg JH7110_SYSCLK_TDM_APB>,
> +				 <&syscrg JH7110_SYSCLK_TDM_INTERNAL>,
> +				 <&syscrg JH7110_SYSCLK_TDM_TDM>,
> +				 <&syscrg JH7110_SYSCLK_MCLK_INNER>,
> +				 <&tdm_ext>;
> +			clock-names = "tdm_ahb", "tdm_apb",
> +				      "tdm_internal", "tdm",
> +				      "mclk_inner", "tdm_ext";
> +			resets = <&syscrg JH7110_SYSRST_TDM_AHB>,
> +				 <&syscrg JH7110_SYSRST_TDM_APB>,
> +				 <&syscrg JH7110_SYSRST_TDM_CORE>;
> +			dmas = <&dma 20>, <&dma 21>;
> +			dma-names = "rx","tx";
> +			#sound-dai-cells = <0>;
> +			status = "disabled";
> +		};
> +
>  		stgcrg: clock-controller at 10230000 {
>  			compatible = "starfive,jh7110-stgcrg";
>  			reg = <0x0 0x10230000 0x0 0x10000>;



More information about the linux-riscv mailing list