[PATCH 3/5] riscv: dts: add initial T-HEAD light SoC device tree

[Krzysztof Kozlowski]

On 07/05/2023 20:23, Jisheng Zhang wrote:
> Add initial device tree for the light(a.k.a TH1520) RISC-V SoC by
> T-HEAD.
> 
> Signed-off-by: Jisheng Zhang <jszhang at kernel.org>
> ---
>  arch/riscv/boot/dts/thead/light.dtsi | 454 +++++++++++++++++++++++++++
>  1 file changed, 454 insertions(+)
>  create mode 100644 arch/riscv/boot/dts/thead/light.dtsi
> 
> diff --git a/arch/riscv/boot/dts/thead/light.dtsi b/arch/riscv/boot/dts/thead/light.dtsi
> new file mode 100644
> index 000000000000..cdf6d8b04d22
> --- /dev/null
> +++ b/arch/riscv/boot/dts/thead/light.dtsi
> @@ -0,0 +1,454 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2021 Alibaba Group Holding Limited.
> + * Copyright (C) 2023 Jisheng Zhang <jszhang at kernel.org>
> + */
> +
> +/ {
> +	compatible = "thead,light";

Undocumented compatible.

Please run scripts/checkpatch.pl and fix reported warnings.

> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +
> +	cpus: cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		timebase-frequency = <3000000>;
> +
> +		c910_0: cpu at 0 {
> +			compatible = "thead,c910", "riscv";

Probably the same.

(...)

> +	soc {
> +		compatible = "simple-bus";
> +		interrupt-parent = <&plic>;
> +		#address-cells = <2>;
> +		#size-cells = <2>;
> +		ranges;
> +
> +		reset: reset-sample {

Node names should be generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation

> +			compatible = "thead,reset-sample";

Undocumented compatible.

Please run scripts/checkpatch.pl and fix reported warnings.

> +			entry-reg = <0xff 0xff019050>;
> +			entry-cnt = <4>;
> +			control-reg = <0xff 0xff015004>;
> +			control-val = <0x1c>;
> +			csr-copy = <0x7f3 0x7c0 0x7c1 0x7c2 0x7c3 0x7c5 0x7cc>;
> +		};
> +
> +		plic: interrupt-controller at ffd8000000 {
> +			compatible = "thead,c910-plic";
> +			reg = <0xff 0xd8000000 0x0 0x01000000>;
> +			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>,
> +					      <&cpu1_intc 11>, <&cpu1_intc 9>,
> +					      <&cpu2_intc 11>, <&cpu2_intc 9>,
> +					      <&cpu3_intc 11>, <&cpu3_intc 9>;
> +			interrupt-controller;
> +			#interrupt-cells = <1>;
> +			riscv,ndev = <240>;
> +		};
> +
> +		clint: timer at ffdc000000 {
> +			compatible = "thead,c900-clint";


Undocumented compatible.

Please run scripts/checkpatch.pl and fix reported warnings.

> +			reg = <0xff 0xdc000000 0x0 0x00010000>;
> +			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
> +					      <&cpu1_intc 3>, <&cpu1_intc 7>,
> +					      <&cpu2_intc 3>, <&cpu2_intc 7>,
> +					      <&cpu3_intc 3>, <&cpu3_intc 7>;
> +		};
> +
> +		uart0: serial at ffe7014000 {
> +			compatible = "snps,dw-apb-uart";
> +			reg = <0xff 0xe7014000 0x0 0x4000>;
> +			interrupts = <36>;
> +			clocks = <&uart_sclk>;
> +			clock-names = "baudclk";
> +			reg-shift = <2>;
> +			reg-io-width = <4>;
> +			status = "disabled";
> +		};
> +
> +		uart1: serial at ffe7f00000 {
> +			compatible = "snps,dw-apb-uart";
> +			reg = <0xff 0xe7f00000 0x0 0x4000>;
> +			interrupts = <37>;
> +			clocks = <&uart_sclk>;
> +			clock-names = "baudclk";
> +			reg-shift = <2>;
> +			reg-io-width = <4>;
> +			status = "disabled";
> +		};
> +
> +		uart3: serial at ffe7f04000 {
> +			compatible = "snps,dw-apb-uart";
> +			reg = <0xff 0xe7f04000 0x0 0x4000>;
> +			interrupts = <39>;
> +			clocks = <&uart_sclk>;
> +			clock-names = "baudclk";
> +			reg-shift = <2>;
> +			reg-io-width = <4>;
> +			status = "disabled";
> +		};
> +
> +		gpio2: gpio at ffe7f34000 {
> +			compatible = "snps,dw-apb-gpio";
> +			reg = <0xff 0xe7f34000 0x0 0x1000>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			portc: gpio-controller at 0 {
> +				compatible = "snps,dw-apb-gpio-port";
> +				gpio-controller;
> +				#gpio-cells = <2>;
> +				ngpios = <32>;
> +				reg = <0>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				interrupts = <58>;
> +			};
> +		};
> +
> +		gpio3: gpio at ffe7f38000 {
> +			compatible = "snps,dw-apb-gpio";
> +			reg = <0xff 0xe7f38000 0x0 0x1000>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			portd: gpio-controller at 0 {
> +				compatible = "snps,dw-apb-gpio-port";
> +				gpio-controller;
> +				#gpio-cells = <2>;
> +				ngpios = <32>;
> +				reg = <0>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				interrupts = <59>;
> +			};
> +		};
> +
> +		gpio0: gpio at ffec005000 {
> +			compatible = "snps,dw-apb-gpio";
> +			reg = <0xff 0xec005000 0x0 0x1000>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			porta: gpio-controller at 0 {
> +				compatible = "snps,dw-apb-gpio-port";
> +				gpio-controller;
> +				#gpio-cells = <2>;
> +				ngpios = <32>;
> +				reg = <0>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				interrupts = <56>;
> +			};
> +		};
> +
> +		gpio1: gpio at ffec006000 {
> +			compatible = "snps,dw-apb-gpio";
> +			reg = <0xff 0xec006000 0x0 0x1000>;
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			portb: gpio-controller at 0 {
> +				compatible = "snps,dw-apb-gpio-port";
> +				gpio-controller;
> +				#gpio-cells = <2>;
> +				ngpios = <32>;
> +				reg = <0>;
> +				interrupt-controller;
> +				#interrupt-cells = <2>;
> +				interrupts = <57>;
> +			};
> +		};
> +
> +		uart2: serial at ffec010000 {
> +			compatible = "snps,dw-apb-uart";
> +			reg = <0xff 0xec010000 0x0 0x4000>;
> +			interrupts = <38>;
> +			clocks = <&uart_sclk>;
> +			clock-names = "baudclk";
> +			reg-shift = <2>;
> +			reg-io-width = <4>;
> +			status = "disabled";
> +		};
> +
> +		dmac0: dmac at ffefc00000 {

Does not look like you tested the DTS against bindings. Please run `make
dtbs_check` (see Documentation/devicetree/bindings/writing-schema.rst
for instructions).



Best regards,
Krzysztof