[PATCH v2 5/9] irqchip: Add RISC-V incoming MSI controller driver
Anup Patel
anup at brainfault.org
Mon May 1 01:28:16 PDT 2023
On Fri, Jan 13, 2023 at 3:40 PM Marc Zyngier <maz at kernel.org> wrote:
>
> On Tue, 03 Jan 2023 14:14:05 +0000,
> Anup Patel <apatel at ventanamicro.com> wrote:
> >
> > The RISC-V advanced interrupt architecture (AIA) specification defines
> > a new MSI controller for managing MSIs on a RISC-V platform. This new
> > MSI controller is referred to as incoming message signaled interrupt
> > controller (IMSIC) which manages MSI on per-HART (or per-CPU) basis.
> > (For more details refer https://github.com/riscv/riscv-aia)
>
> And how about IPIs, which this driver seems to be concerned about?
Okay, I will mention about IPIs in the commit description.
>
> >
> > This patch adds an irqchip driver for RISC-V IMSIC found on RISC-V
> > platforms.
> >
> > Signed-off-by: Anup Patel <apatel at ventanamicro.com>
> > ---
> > drivers/irqchip/Kconfig | 14 +-
> > drivers/irqchip/Makefile | 1 +
> > drivers/irqchip/irq-riscv-imsic.c | 1174 +++++++++++++++++++++++++++
> > include/linux/irqchip/riscv-imsic.h | 92 +++
> > 4 files changed, 1280 insertions(+), 1 deletion(-)
> > create mode 100644 drivers/irqchip/irq-riscv-imsic.c
> > create mode 100644 include/linux/irqchip/riscv-imsic.h
> >
> > diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> > index 9e65345ca3f6..a1315189a595 100644
> > --- a/drivers/irqchip/Kconfig
> > +++ b/drivers/irqchip/Kconfig
> > @@ -29,7 +29,6 @@ config ARM_GIC_V2M
> >
> > config GIC_NON_BANKED
> > bool
> > -
> > config ARM_GIC_V3
> > bool
> > select IRQ_DOMAIN_HIERARCHY
> > @@ -548,6 +547,19 @@ config SIFIVE_PLIC
> > select IRQ_DOMAIN_HIERARCHY
> > select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
> >
> > +config RISCV_IMSIC
> > + bool
> > + depends on RISCV
> > + select IRQ_DOMAIN_HIERARCHY
> > + select GENERIC_MSI_IRQ_DOMAIN
> > +
> > +config RISCV_IMSIC_PCI
> > + bool
> > + depends on RISCV_IMSIC
> > + depends on PCI
> > + depends on PCI_MSI
> > + default RISCV_IMSIC
>
> This should definitely tell you that this driver needs splitting.
The code under "#ifdef CONFIG_RISCV_IMSIC_PCI" is hardly 40 lines
so I felt it was too small to deserve its own source file.
>
> > +
> > config EXYNOS_IRQ_COMBINER
> > bool "Samsung Exynos IRQ combiner support" if COMPILE_TEST
> > depends on (ARCH_EXYNOS && ARM) || COMPILE_TEST
> > diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> > index 87b49a10962c..22c723cc6ec8 100644
> > --- a/drivers/irqchip/Makefile
> > +++ b/drivers/irqchip/Makefile
> > @@ -96,6 +96,7 @@ obj-$(CONFIG_QCOM_MPM) += irq-qcom-mpm.o
> > obj-$(CONFIG_CSKY_MPINTC) += irq-csky-mpintc.o
> > obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o
> > obj-$(CONFIG_RISCV_INTC) += irq-riscv-intc.o
> > +obj-$(CONFIG_RISCV_IMSIC) += irq-riscv-imsic.o
> > obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o
> > obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o
> > obj-$(CONFIG_IMX_INTMUX) += irq-imx-intmux.o
> > diff --git a/drivers/irqchip/irq-riscv-imsic.c b/drivers/irqchip/irq-riscv-imsic.c
> > new file mode 100644
> > index 000000000000..4c16b66738d6
> > --- /dev/null
> > +++ b/drivers/irqchip/irq-riscv-imsic.c
> > @@ -0,0 +1,1174 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (C) 2021 Western Digital Corporation or its affiliates.
> > + * Copyright (C) 2022 Ventana Micro Systems Inc.
> > + */
> > +
> > +#define pr_fmt(fmt) "riscv-imsic: " fmt
> > +#include <linux/bitmap.h>
> > +#include <linux/cpu.h>
> > +#include <linux/interrupt.h>
> > +#include <linux/io.h>
> > +#include <linux/iommu.h>
> > +#include <linux/irq.h>
> > +#include <linux/irqchip.h>
> > +#include <linux/irqchip/chained_irq.h>
> > +#include <linux/irqchip/riscv-imsic.h>
> > +#include <linux/irqdomain.h>
> > +#include <linux/module.h>
> > +#include <linux/msi.h>
> > +#include <linux/of.h>
> > +#include <linux/of_address.h>
> > +#include <linux/of_irq.h>
> > +#include <linux/pci.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/spinlock.h>
> > +#include <linux/smp.h>
> > +#include <asm/hwcap.h>
> > +
> > +#define IMSIC_DISABLE_EIDELIVERY 0
> > +#define IMSIC_ENABLE_EIDELIVERY 1
> > +#define IMSIC_DISABLE_EITHRESHOLD 1
> > +#define IMSIC_ENABLE_EITHRESHOLD 0
> > +
> > +#define imsic_csr_write(__c, __v) \
> > +do { \
> > + csr_write(CSR_ISELECT, __c); \
> > + csr_write(CSR_IREG, __v); \
> > +} while (0)
> > +
> > +#define imsic_csr_read(__c) \
> > +({ \
> > + unsigned long __v; \
> > + csr_write(CSR_ISELECT, __c); \
> > + __v = csr_read(CSR_IREG); \
> > + __v; \
> > +})
> > +
> > +#define imsic_csr_set(__c, __v) \
> > +do { \
> > + csr_write(CSR_ISELECT, __c); \
> > + csr_set(CSR_IREG, __v); \
> > +} while (0)
> > +
> > +#define imsic_csr_clear(__c, __v) \
> > +do { \
> > + csr_write(CSR_ISELECT, __c); \
> > + csr_clear(CSR_IREG, __v); \
> > +} while (0)
> > +
> > +struct imsic_mmio {
> > + phys_addr_t pa;
> > + void __iomem *va;
> > + unsigned long size;
> > +};
> > +
> > +struct imsic_priv {
> > + /* Global configuration common for all HARTs */
> > + struct imsic_global_config global;
> > +
> > + /* MMIO regions */
> > + u32 num_mmios;
> > + struct imsic_mmio *mmios;
> > +
> > + /* Global state of interrupt identities */
> > + raw_spinlock_t ids_lock;
> > + unsigned long *ids_used_bimap;
> > + unsigned long *ids_enabled_bimap;
> > + unsigned int *ids_target_cpu;
> > +
> > + /* Mask for connected CPUs */
> > + struct cpumask lmask;
> > +
> > + /* IPI interrupt identity */
> > + u32 ipi_id;
> > + u32 ipi_lsync_id;
> > +
> > + /* IRQ domains */
> > + struct irq_domain *base_domain;
> > + struct irq_domain *pci_domain;
> > + struct irq_domain *plat_domain;
> > +};
> > +
> > +struct imsic_handler {
> > + /* Local configuration for given HART */
> > + struct imsic_local_config local;
> > +
> > + /* Pointer to private context */
> > + struct imsic_priv *priv;
> > +};
> > +
> > +static bool imsic_init_done;
> > +
> > +static int imsic_parent_irq;
> > +static DEFINE_PER_CPU(struct imsic_handler, imsic_handlers);
> > +
> > +const struct imsic_global_config *imsic_get_global_config(void)
> > +{
> > + struct imsic_handler *handler = this_cpu_ptr(&imsic_handlers);
> > +
> > + if (!handler || !handler->priv)
> > + return NULL;
> > +
> > + return &handler->priv->global;
> > +}
> > +EXPORT_SYMBOL_GPL(imsic_get_global_config);
> > +
> > +const struct imsic_local_config *imsic_get_local_config(unsigned int cpu)
> > +{
> > + struct imsic_handler *handler = per_cpu_ptr(&imsic_handlers, cpu);
> > +
> > + if (!handler || !handler->priv)
> > + return NULL;
>
> How can this happen?
These are redundant checks. I will drop.
>
> > +
> > + return &handler->local;
> > +}
> > +EXPORT_SYMBOL_GPL(imsic_get_local_config);
>
> Why are these symbols exported? They have no user, so they shouldn't
> even exist here. I also seriously doubt there is a valid use case for
> exposing this information to the rest of the kernel.
The imsic_get_global_config() is used by APLIC driver and KVM RISC-V
module whereas imsic_get_local_config() is only used by KVM RISC-V.
The KVM RISC-V AIA irqchip patches are available in riscv_kvm_aia_v1
branch at: https://github.com/avpatel/linux.git. I have not posted KVM RISC-V
patches due various interdependencies.
>
> > +
> > +static int imsic_cpu_page_phys(unsigned int cpu,
> > + unsigned int guest_index,
> > + phys_addr_t *out_msi_pa)
> > +{
> > + struct imsic_handler *handler = per_cpu_ptr(&imsic_handlers, cpu);
> > + struct imsic_global_config *global;
> > + struct imsic_local_config *local;
> > +
> > + if (!handler || !handler->priv)
> > + return -ENODEV;
> > + local = &handler->local;
> > + global = &handler->priv->global;
> > +
> > + if (BIT(global->guest_index_bits) <= guest_index)
> > + return -EINVAL;
> > +
> > + if (out_msi_pa)
> > + *out_msi_pa = local->msi_pa +
> > + (guest_index * IMSIC_MMIO_PAGE_SZ);
> > +
> > + return 0;
> > +}
> > +
> > +static int imsic_get_cpu(struct imsic_priv *priv,
> > + const struct cpumask *mask_val, bool force,
> > + unsigned int *out_target_cpu)
> > +{
> > + struct cpumask amask;
> > + unsigned int cpu;
> > +
> > + cpumask_and(&amask, &priv->lmask, mask_val);
> > +
> > + if (force)
> > + cpu = cpumask_first(&amask);
> > + else
> > + cpu = cpumask_any_and(&amask, cpu_online_mask);
> > +
> > + if (cpu >= nr_cpu_ids)
> > + return -EINVAL;
> > +
> > + if (out_target_cpu)
> > + *out_target_cpu = cpu;
> > +
> > + return 0;
> > +}
> > +
> > +static int imsic_get_cpu_msi_msg(unsigned int cpu, unsigned int id,
> > + struct msi_msg *msg)
> > +{
> > + phys_addr_t msi_addr;
> > + int err;
> > +
> > + err = imsic_cpu_page_phys(cpu, 0, &msi_addr);
> > + if (err)
> > + return err;
> > +
> > + msg->address_hi = upper_32_bits(msi_addr);
> > + msg->address_lo = lower_32_bits(msi_addr);
> > + msg->data = id;
> > +
> > + return err;
> > +}
> > +
> > +static void imsic_id_set_target(struct imsic_priv *priv,
> > + unsigned int id, unsigned int target_cpu)
> > +{
> > + unsigned long flags;
> > +
> > + raw_spin_lock_irqsave(&priv->ids_lock, flags);
> > + priv->ids_target_cpu[id] = target_cpu;
> > + raw_spin_unlock_irqrestore(&priv->ids_lock, flags);
> > +}
> > +
> > +static unsigned int imsic_id_get_target(struct imsic_priv *priv,
> > + unsigned int id)
> > +{
> > + unsigned int ret;
> > + unsigned long flags;
> > +
> > + raw_spin_lock_irqsave(&priv->ids_lock, flags);
> > + ret = priv->ids_target_cpu[id];
> > + raw_spin_unlock_irqrestore(&priv->ids_lock, flags);
> > +
> > + return ret;
> > +}
> > +
> > +static void __imsic_eix_update(unsigned long base_id,
> > + unsigned long num_id, bool pend, bool val)
> > +{
> > + unsigned long i, isel, ireg, flags;
> > + unsigned long id = base_id, last_id = base_id + num_id;
> > +
> > + while (id < last_id) {
> > + isel = id / BITS_PER_LONG;
> > + isel *= BITS_PER_LONG / IMSIC_EIPx_BITS;
> > + isel += (pend) ? IMSIC_EIP0 : IMSIC_EIE0;
> > +
> > + ireg = 0;
> > + for (i = id & (__riscv_xlen - 1);
> > + (id < last_id) && (i < __riscv_xlen); i++) {
> > + ireg |= BIT(i);
> > + id++;
> > + }
> > +
> > + /*
> > + * The IMSIC EIEx and EIPx registers are indirectly
> > + * accessed via using ISELECT and IREG CSRs so we
> > + * save/restore local IRQ to ensure that we don't
> > + * get preempted while accessing IMSIC registers.
> > + */
> > + local_irq_save(flags);
> > + if (val)
> > + imsic_csr_set(isel, ireg);
> > + else
> > + imsic_csr_clear(isel, ireg);
> > + local_irq_restore(flags);
>
> What is the actual requirement? no preemption? or no interrupts? This
> isn't the same thing. Also, a bunch of the users already disable
> interrupts. Consistency wouldn't hurt here.
No preemption is the only requirement. Since the callers of these
functions disable local IRQ, I think we don't need to not anything
special here. I will drop the local IRQ save/restore and update
the comments as well.
>
> > + }
> > +}
> > +
> > +#define __imsic_id_enable(__id) \
> > + __imsic_eix_update((__id), 1, false, true)
> > +#define __imsic_id_disable(__id) \
> > + __imsic_eix_update((__id), 1, false, false)
> > +
> > +#ifdef CONFIG_SMP
> > +static void __imsic_id_smp_sync(struct imsic_priv *priv)
> > +{
> > + struct imsic_handler *handler;
> > + struct cpumask amask;
> > + int cpu;
> > +
> > + cpumask_and(&amask, &priv->lmask, cpu_online_mask);
>
> Can't this race against a CPU going down?
Yes, it can race if a CPU goes down while we are in this function
but this won't be a problem because the imsic_starting_cpu()
will unconditionally do imsic_ids_local_sync() when the CPU is
brought-up again. I will add a multiline comment block explaining
this.
>
> > + for_each_cpu(cpu, &amask) {
> > + if (cpu == smp_processor_id())
> > + continue;
> > +
> > + handler = per_cpu_ptr(&imsic_handlers, cpu);
> > + if (!handler || !handler->priv || !handler->local.msi_va) {
> > + pr_warn("CPU%d: handler not initialized\n", cpu);
>
> How many times are you going to do that? On each failing synchronisation?
My bad for adding these paranoid checks. I remove these checks
wherever possible.
>
> > + continue;
> > + }
> > +
> > + writel(handler->priv->ipi_lsync_id, handler->local.msi_va);
>
> As I understand it, this is a "behind the scenes" IPI. Why isn't that
> a *real* IPI?
Yes, that's correct. The ID enable bits are per-CPU accessible only
via CSRs hence we have a special "behind the scenes" IPI to
synchronize state of ID enable bits.
>
> > + }
> > +}
> > +#else
> > +#define __imsic_id_smp_sync(__priv)
> > +#endif
> > +
> > +static void imsic_id_enable(struct imsic_priv *priv, unsigned int id)
> > +{
> > + unsigned long flags;
> > +
> > + raw_spin_lock_irqsave(&priv->ids_lock, flags);
> > + bitmap_set(priv->ids_enabled_bimap, id, 1);
> > + __imsic_id_enable(id);
> > + raw_spin_unlock_irqrestore(&priv->ids_lock, flags);
> > +
> > + __imsic_id_smp_sync(priv);
> > +}
> > +
> > +static void imsic_id_disable(struct imsic_priv *priv, unsigned int id)
> > +{
> > + unsigned long flags;
> > +
> > + raw_spin_lock_irqsave(&priv->ids_lock, flags);
> > + bitmap_clear(priv->ids_enabled_bimap, id, 1);
> > + __imsic_id_disable(id);
> > + raw_spin_unlock_irqrestore(&priv->ids_lock, flags);
> > +
> > + __imsic_id_smp_sync(priv);
> > +}
> > +
> > +static void imsic_ids_local_sync(struct imsic_priv *priv)
> > +{
> > + int i;
> > + unsigned long flags;
> > +
> > + raw_spin_lock_irqsave(&priv->ids_lock, flags);
> > + for (i = 1; i <= priv->global.nr_ids; i++) {
> > + if (priv->ipi_id == i || priv->ipi_lsync_id == i)
> > + continue;
> > +
> > + if (test_bit(i, priv->ids_enabled_bimap))
> > + __imsic_id_enable(i);
> > + else
> > + __imsic_id_disable(i);
> > + }
> > + raw_spin_unlock_irqrestore(&priv->ids_lock, flags);
> > +}
> > +
> > +static void imsic_ids_local_delivery(struct imsic_priv *priv, bool enable)
> > +{
> > + if (enable) {
> > + imsic_csr_write(IMSIC_EITHRESHOLD, IMSIC_ENABLE_EITHRESHOLD);
> > + imsic_csr_write(IMSIC_EIDELIVERY, IMSIC_ENABLE_EIDELIVERY);
> > + } else {
> > + imsic_csr_write(IMSIC_EIDELIVERY, IMSIC_DISABLE_EIDELIVERY);
> > + imsic_csr_write(IMSIC_EITHRESHOLD, IMSIC_DISABLE_EITHRESHOLD);
> > + }
> > +}
> > +
> > +static int imsic_ids_alloc(struct imsic_priv *priv,
> > + unsigned int max_id, unsigned int order)
> > +{
> > + int ret;
> > + unsigned long flags;
> > +
> > + if ((priv->global.nr_ids < max_id) ||
> > + (max_id < BIT(order)))
> > + return -EINVAL;
>
> Why do we need this check? Shouldn't that be guaranteed by
> construction?
Yes, these are redundant checks. I will remove it.
>
> > +
> > + raw_spin_lock_irqsave(&priv->ids_lock, flags);
> > + ret = bitmap_find_free_region(priv->ids_used_bimap,
> > + max_id + 1, order);
> > + raw_spin_unlock_irqrestore(&priv->ids_lock, flags);
> > +
> > + return ret;
> > +}
> > +
> > +static void imsic_ids_free(struct imsic_priv *priv, unsigned int base_id,
> > + unsigned int order)
> > +{
> > + unsigned long flags;
> > +
> > + raw_spin_lock_irqsave(&priv->ids_lock, flags);
> > + bitmap_release_region(priv->ids_used_bimap, base_id, order);
> > + raw_spin_unlock_irqrestore(&priv->ids_lock, flags);
> > +}
> > +
> > +static int __init imsic_ids_init(struct imsic_priv *priv)
> > +{
> > + int i;
> > + struct imsic_global_config *global = &priv->global;
> > +
> > + raw_spin_lock_init(&priv->ids_lock);
> > +
> > + /* Allocate used bitmap */
> > + priv->ids_used_bimap = kcalloc(BITS_TO_LONGS(global->nr_ids + 1),
> > + sizeof(unsigned long), GFP_KERNEL);
>
> How about bitmap_alloc?
Okay, I will use bitmap_zalloc() here.
>
> > + if (!priv->ids_used_bimap)
> > + return -ENOMEM;
> > +
> > + /* Allocate enabled bitmap */
> > + priv->ids_enabled_bimap = kcalloc(BITS_TO_LONGS(global->nr_ids + 1),
> > + sizeof(unsigned long), GFP_KERNEL);
> > + if (!priv->ids_enabled_bimap) {
> > + kfree(priv->ids_used_bimap);
> > + return -ENOMEM;
> > + }
> > +
> > + /* Allocate target CPU array */
> > + priv->ids_target_cpu = kcalloc(global->nr_ids + 1,
> > + sizeof(unsigned int), GFP_KERNEL);
> > + if (!priv->ids_target_cpu) {
> > + kfree(priv->ids_enabled_bimap);
> > + kfree(priv->ids_used_bimap);
> > + return -ENOMEM;
> > + }
> > + for (i = 0; i <= global->nr_ids; i++)
> > + priv->ids_target_cpu[i] = UINT_MAX;
> > +
> > + /* Reserve ID#0 because it is special and never implemented */
> > + bitmap_set(priv->ids_used_bimap, 0, 1);
> > +
> > + return 0;
> > +}
> > +
> > +static void __init imsic_ids_cleanup(struct imsic_priv *priv)
> > +{
> > + kfree(priv->ids_target_cpu);
> > + kfree(priv->ids_enabled_bimap);
> > + kfree(priv->ids_used_bimap);
> > +}
> > +
> > +#ifdef CONFIG_SMP
> > +static void imsic_ipi_send(unsigned int cpu)
> > +{
> > + struct imsic_handler *handler = per_cpu_ptr(&imsic_handlers, cpu);
> > +
> > + if (!handler || !handler->priv || !handler->local.msi_va) {
> > + pr_warn("CPU%d: handler not initialized\n", cpu);
> > + return;
> > + }
> > +
> > + writel(handler->priv->ipi_id, handler->local.msi_va);
> > +}
> > +
> > +static void imsic_ipi_enable(struct imsic_priv *priv)
> > +{
> > + __imsic_id_enable(priv->ipi_id);
> > + __imsic_id_enable(priv->ipi_lsync_id);
> > +}
> > +
> > +static int __init imsic_ipi_domain_init(struct imsic_priv *priv)
> > +{
> > + int virq;
> > +
> > + /* Allocate interrupt identity for IPIs */
> > + virq = imsic_ids_alloc(priv, priv->global.nr_ids, get_count_order(1));
> > + if (virq < 0)
> > + return virq;
> > + priv->ipi_id = virq;
> > +
> > + /* Create IMSIC IPI multiplexing */
> > + virq = ipi_mux_create(BITS_PER_BYTE, imsic_ipi_send);
>
> Please! This BITS_PER_BYTE makes zero sense here. Have a proper define
> that says 8, and document *why* this is 8! You're not defining a type
> system, you're writing a irqchip driver.
Okay, I will add a "#define" for the number of IPI with an explanation
for *why*.
>
> > + if (virq <= 0) {
> > + imsic_ids_free(priv, priv->ipi_id, get_count_order(1));
> > + return (virq < 0) ? virq : -ENOMEM;
> > + }
> > +
> > + /* Set vIRQ range */
> > + riscv_ipi_set_virq_range(virq, BITS_PER_BYTE, true);
> > +
> > + /* Allocate interrupt identity for local enable/disable sync */
> > + virq = imsic_ids_alloc(priv, priv->global.nr_ids, get_count_order(1));
> > + if (virq < 0) {
> > + imsic_ids_free(priv, priv->ipi_id, get_count_order(1));
> > + return virq;
> > + }
> > + priv->ipi_lsync_id = virq;
> > +
> > + return 0;
> > +}
> > +
> > +static void __init imsic_ipi_domain_cleanup(struct imsic_priv *priv)
> > +{
> > + imsic_ids_free(priv, priv->ipi_lsync_id, get_count_order(1));
> > + if (priv->ipi_id)
> > + imsic_ids_free(priv, priv->ipi_id, get_count_order(1));
> > +}
> > +#else
> > +static void imsic_ipi_enable(struct imsic_priv *priv)
> > +{
> > +}
> > +
> > +static int __init imsic_ipi_domain_init(struct imsic_priv *priv)
> > +{
> > + /* Clear the IPI ids because we are not using IPIs */
> > + priv->ipi_id = 0;
> > + priv->ipi_lsync_id = 0;
> > + return 0;
> > +}
> > +
> > +static void __init imsic_ipi_domain_cleanup(struct imsic_priv *priv)
> > +{
> > +}
> > +#endif
> > +
> > +static void imsic_irq_mask(struct irq_data *d)
> > +{
> > + imsic_id_disable(irq_data_get_irq_chip_data(d), d->hwirq);
> > +}
> > +
> > +static void imsic_irq_unmask(struct irq_data *d)
> > +{
> > + imsic_id_enable(irq_data_get_irq_chip_data(d), d->hwirq);
> > +}
> > +
> > +static void imsic_irq_compose_msi_msg(struct irq_data *d,
> > + struct msi_msg *msg)
> > +{
> > + struct imsic_priv *priv = irq_data_get_irq_chip_data(d);
> > + unsigned int cpu;
> > + int err;
> > +
> > + cpu = imsic_id_get_target(priv, d->hwirq);
> > + WARN_ON(cpu == UINT_MAX);
> > +
> > + err = imsic_get_cpu_msi_msg(cpu, d->hwirq, msg);
> > + WARN_ON(err);
> > +
> > + iommu_dma_compose_msi_msg(irq_data_get_msi_desc(d), msg);
> > +}
> > +
> > +#ifdef CONFIG_SMP
> > +static int imsic_irq_set_affinity(struct irq_data *d,
> > + const struct cpumask *mask_val,
> > + bool force)
> > +{
> > + struct imsic_priv *priv = irq_data_get_irq_chip_data(d);
> > + unsigned int target_cpu;
> > + int rc;
> > +
> > + rc = imsic_get_cpu(priv, mask_val, force, &target_cpu);
> > + if (rc)
> > + return rc;
> > +
> > + imsic_id_set_target(priv, d->hwirq, target_cpu);
> > + irq_data_update_effective_affinity(d, cpumask_of(target_cpu));
> > +
> > + return IRQ_SET_MASK_OK;
> > +}
> > +#endif
> > +
> > +static struct irq_chip imsic_irq_base_chip = {
> > + .name = "RISC-V IMSIC-BASE",
> > + .irq_mask = imsic_irq_mask,
> > + .irq_unmask = imsic_irq_unmask,
> > +#ifdef CONFIG_SMP
> > + .irq_set_affinity = imsic_irq_set_affinity,
> > +#endif
> > + .irq_compose_msi_msg = imsic_irq_compose_msi_msg,
> > + .flags = IRQCHIP_SKIP_SET_WAKE |
> > + IRQCHIP_MASK_ON_SUSPEND,
> > +};
> > +
> > +static int imsic_irq_domain_alloc(struct irq_domain *domain,
> > + unsigned int virq,
> > + unsigned int nr_irqs,
> > + void *args)
> > +{
> > + struct imsic_priv *priv = domain->host_data;
> > + msi_alloc_info_t *info = args;
> > + phys_addr_t msi_addr;
> > + int i, hwirq, err = 0;
> > + unsigned int cpu;
> > +
> > + err = imsic_get_cpu(priv, &priv->lmask, false, &cpu);
> > + if (err)
> > + return err;
> > +
> > + err = imsic_cpu_page_phys(cpu, 0, &msi_addr);
> > + if (err)
> > + return err;
> > +
> > + hwirq = imsic_ids_alloc(priv, priv->global.nr_ids,
> > + get_count_order(nr_irqs));
> > + if (hwirq < 0)
> > + return hwirq;
> > +
> > + err = iommu_dma_prepare_msi(info->desc, msi_addr);
> > + if (err)
> > + goto fail;
> > +
> > + for (i = 0; i < nr_irqs; i++) {
> > + imsic_id_set_target(priv, hwirq + i, cpu);
> > + irq_domain_set_info(domain, virq + i, hwirq + i,
> > + &imsic_irq_base_chip, priv,
> > + handle_simple_irq, NULL, NULL);
> > + irq_set_noprobe(virq + i);
> > + irq_set_affinity(virq + i, &priv->lmask);
> > + }
> > +
> > + return 0;
> > +
> > +fail:
> > + imsic_ids_free(priv, hwirq, get_count_order(nr_irqs));
> > + return err;
> > +}
> > +
> > +static void imsic_irq_domain_free(struct irq_domain *domain,
> > + unsigned int virq,
> > + unsigned int nr_irqs)
> > +{
> > + struct irq_data *d = irq_domain_get_irq_data(domain, virq);
> > + struct imsic_priv *priv = domain->host_data;
> > +
> > + imsic_ids_free(priv, d->hwirq, get_count_order(nr_irqs));
> > + irq_domain_free_irqs_parent(domain, virq, nr_irqs);
> > +}
> > +
> > +static const struct irq_domain_ops imsic_base_domain_ops = {
> > + .alloc = imsic_irq_domain_alloc,
> > + .free = imsic_irq_domain_free,
> > +};
> > +
> > +#ifdef CONFIG_RISCV_IMSIC_PCI
> > +
> > +static void imsic_pci_mask_irq(struct irq_data *d)
> > +{
> > + pci_msi_mask_irq(d);
> > + irq_chip_mask_parent(d);
> > +}
> > +
> > +static void imsic_pci_unmask_irq(struct irq_data *d)
> > +{
> > + pci_msi_unmask_irq(d);
> > + irq_chip_unmask_parent(d);
> > +}
> > +
> > +static struct irq_chip imsic_pci_irq_chip = {
> > + .name = "RISC-V IMSIC-PCI",
> > + .irq_mask = imsic_pci_mask_irq,
> > + .irq_unmask = imsic_pci_unmask_irq,
> > + .irq_eoi = irq_chip_eoi_parent,
> > +};
> > +
> > +static struct msi_domain_ops imsic_pci_domain_ops = {
> > +};
> > +
> > +static struct msi_domain_info imsic_pci_domain_info = {
> > + .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
> > + MSI_FLAG_PCI_MSIX | MSI_FLAG_MULTI_PCI_MSI),
> > + .ops = &imsic_pci_domain_ops,
> > + .chip = &imsic_pci_irq_chip,
> > +};
> > +
> > +#endif
> > +
> > +static struct irq_chip imsic_plat_irq_chip = {
> > + .name = "RISC-V IMSIC-PLAT",
> > +};
> > +
> > +static struct msi_domain_ops imsic_plat_domain_ops = {
> > +};
> > +
> > +static struct msi_domain_info imsic_plat_domain_info = {
> > + .flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS),
> > + .ops = &imsic_plat_domain_ops,
> > + .chip = &imsic_plat_irq_chip,
> > +};
> > +
> > +static int __init imsic_irq_domains_init(struct imsic_priv *priv,
> > + struct fwnode_handle *fwnode)
> > +{
> > + /* Create Base IRQ domain */
> > + priv->base_domain = irq_domain_create_tree(fwnode,
> > + &imsic_base_domain_ops, priv);
> > + if (!priv->base_domain) {
> > + pr_err("Failed to create IMSIC base domain\n");
> > + return -ENOMEM;
> > + }
> > + irq_domain_update_bus_token(priv->base_domain, DOMAIN_BUS_NEXUS);
> > +
> > +#ifdef CONFIG_RISCV_IMSIC_PCI
> > + /* Create PCI MSI domain */
> > + priv->pci_domain = pci_msi_create_irq_domain(fwnode,
> > + &imsic_pci_domain_info,
> > + priv->base_domain);
> > + if (!priv->pci_domain) {
> > + pr_err("Failed to create IMSIC PCI domain\n");
> > + irq_domain_remove(priv->base_domain);
> > + return -ENOMEM;
> > + }
> > +#endif
> > +
> > + /* Create Platform MSI domain */
> > + priv->plat_domain = platform_msi_create_irq_domain(fwnode,
> > + &imsic_plat_domain_info,
> > + priv->base_domain);
> > + if (!priv->plat_domain) {
> > + pr_err("Failed to create IMSIC platform domain\n");
> > + if (priv->pci_domain)
> > + irq_domain_remove(priv->pci_domain);
> > + irq_domain_remove(priv->base_domain);
> > + return -ENOMEM;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +/*
> > + * To handle an interrupt, we read the TOPEI CSR and write zero in one
> > + * instruction. If TOPEI CSR is non-zero then we translate TOPEI.ID to
> > + * Linux interrupt number and let Linux IRQ subsystem handle it.
> > + */
> > +static void imsic_handle_irq(struct irq_desc *desc)
> > +{
> > + struct imsic_handler *handler = this_cpu_ptr(&imsic_handlers);
> > + struct irq_chip *chip = irq_desc_get_chip(desc);
> > + struct imsic_priv *priv = handler->priv;
> > + irq_hw_number_t hwirq;
> > + int err;
> > +
> > + WARN_ON_ONCE(!handler->priv);
> > +
> > + chained_irq_enter(chip, desc);
> > +
> > + while ((hwirq = csr_swap(CSR_TOPEI, 0))) {
> > + hwirq = hwirq >> TOPEI_ID_SHIFT;
> > +
> > + if (hwirq == priv->ipi_id) {
> > +#ifdef CONFIG_SMP
> > + ipi_mux_process();
> > +#endif
> > + continue;
> > + } else if (hwirq == priv->ipi_lsync_id) {
> > + imsic_ids_local_sync(priv);
> > + continue;
> > + }
> > +
> > + err = generic_handle_domain_irq(priv->base_domain, hwirq);
> > + if (unlikely(err))
> > + pr_warn_ratelimited(
> > + "hwirq %lu mapping not found\n", hwirq);
> > + }
> > +
> > + chained_irq_exit(chip, desc);
> > +}
> > +
> > +static int imsic_starting_cpu(unsigned int cpu)
> > +{
> > + struct imsic_handler *handler = this_cpu_ptr(&imsic_handlers);
> > + struct imsic_priv *priv = handler->priv;
> > +
> > + /* Enable per-CPU parent interrupt */
> > + if (imsic_parent_irq)
> > + enable_percpu_irq(imsic_parent_irq,
> > + irq_get_trigger_type(imsic_parent_irq));
>
> Shouldn't that be the default already?
The imsic_parent_irq is already set before calling imsic_starting_cpu()
on each CPU so we can drop the if-check.
>
> > + else
> > + pr_warn("cpu%d: parent irq not available\n", cpu);
>
> And yet continue in sequence? Duh...
This warning is also not required.
>
> > +
> > + /* Enable IPIs */
> > + imsic_ipi_enable(priv);
> > +
> > + /*
> > + * Interrupts identities might have been enabled/disabled while
> > + * this CPU was not running so sync-up local enable/disable state.
> > + */
> > + imsic_ids_local_sync(priv);
> > +
> > + /* Locally enable interrupt delivery */
> > + imsic_ids_local_delivery(priv, true);
> > +
> > + return 0;
> > +}
> > +
> > +struct imsic_fwnode_ops {
> > + u32 (*nr_parent_irq)(struct fwnode_handle *fwnode,
> > + void *fwopaque);
> > + int (*parent_hartid)(struct fwnode_handle *fwnode,
> > + void *fwopaque, u32 index,
> > + unsigned long *out_hartid);
> > + u32 (*nr_mmio)(struct fwnode_handle *fwnode, void *fwopaque);
> > + int (*mmio_to_resource)(struct fwnode_handle *fwnode,
> > + void *fwopaque, u32 index,
> > + struct resource *res);
> > + void __iomem *(*mmio_map)(struct fwnode_handle *fwnode,
> > + void *fwopaque, u32 index);
> > + int (*read_u32)(struct fwnode_handle *fwnode,
> > + void *fwopaque, const char *prop, u32 *out_val);
> > + bool (*read_bool)(struct fwnode_handle *fwnode,
> > + void *fwopaque, const char *prop);
> > +};
>
> Why do we need this sort of (terrible) indirection?
Okay, I will replace this indirection with fwnode APIs.
>
> > +
> > +static int __init imsic_init(struct imsic_fwnode_ops *fwops,
> > + struct fwnode_handle *fwnode,
> > + void *fwopaque)
> > +{
> > + struct resource res;
> > + phys_addr_t base_addr;
> > + int rc, nr_parent_irqs;
> > + struct imsic_mmio *mmio;
> > + struct imsic_priv *priv;
> > + struct irq_domain *domain;
> > + struct imsic_handler *handler;
> > + struct imsic_global_config *global;
> > + u32 i, tmp, nr_handlers = 0;
> > +
> > + if (imsic_init_done) {
> > + pr_err("%pfwP: already initialized hence ignoring\n",
> > + fwnode);
> > + return -ENODEV;
> > + }
> > +
> > + if (!riscv_isa_extension_available(NULL, SxAIA)) {
> > + pr_err("%pfwP: AIA support not available\n", fwnode);
> > + return -ENODEV;
> > + }
> > +
> > + priv = kzalloc(sizeof(*priv), GFP_KERNEL);
> > + if (!priv)
> > + return -ENOMEM;
> > + global = &priv->global;
> > +
> > + /* Find number of parent interrupts */
> > + nr_parent_irqs = fwops->nr_parent_irq(fwnode, fwopaque);
> > + if (!nr_parent_irqs) {
> > + pr_err("%pfwP: no parent irqs available\n", fwnode);
> > + return -EINVAL;
> > + }
> > +
> > + /* Find number of guest index bits in MSI address */
> > + rc = fwops->read_u32(fwnode, fwopaque, "riscv,guest-index-bits",
> > + &global->guest_index_bits);
> > + if (rc)
> > + global->guest_index_bits = 0;
> > + tmp = BITS_PER_LONG - IMSIC_MMIO_PAGE_SHIFT;
> > + if (tmp < global->guest_index_bits) {
> > + pr_err("%pfwP: guest index bits too big\n", fwnode);
> > + return -EINVAL;
> > + }
> > +
> > + /* Find number of HART index bits */
> > + rc = fwops->read_u32(fwnode, fwopaque, "riscv,hart-index-bits",
> > + &global->hart_index_bits);
> > + if (rc) {
> > + /* Assume default value */
> > + global->hart_index_bits = __fls(nr_parent_irqs);
> > + if (BIT(global->hart_index_bits) < nr_parent_irqs)
> > + global->hart_index_bits++;
> > + }
> > + tmp = BITS_PER_LONG - IMSIC_MMIO_PAGE_SHIFT -
> > + global->guest_index_bits;
> > + if (tmp < global->hart_index_bits) {
> > + pr_err("%pfwP: HART index bits too big\n", fwnode);
> > + return -EINVAL;
> > + }
> > +
> > + /* Find number of group index bits */
> > + rc = fwops->read_u32(fwnode, fwopaque, "riscv,group-index-bits",
> > + &global->group_index_bits);
> > + if (rc)
> > + global->group_index_bits = 0;
> > + tmp = BITS_PER_LONG - IMSIC_MMIO_PAGE_SHIFT -
> > + global->guest_index_bits - global->hart_index_bits;
> > + if (tmp < global->group_index_bits) {
> > + pr_err("%pfwP: group index bits too big\n", fwnode);
> > + return -EINVAL;
> > + }
> > +
> > + /*
> > + * Find first bit position of group index.
> > + * If not specified assumed the default APLIC-IMSIC configuration.
> > + */
> > + rc = fwops->read_u32(fwnode, fwopaque, "riscv,group-index-shift",
> > + &global->group_index_shift);
> > + if (rc)
> > + global->group_index_shift = IMSIC_MMIO_PAGE_SHIFT * 2;
> > + tmp = global->group_index_bits + global->group_index_shift - 1;
> > + if (tmp >= BITS_PER_LONG) {
> > + pr_err("%pfwP: group index shift too big\n", fwnode);
> > + return -EINVAL;
> > + }
> > +
> > + /* Find number of interrupt identities */
> > + rc = fwops->read_u32(fwnode, fwopaque, "riscv,num-ids",
> > + &global->nr_ids);
> > + if (rc) {
> > + pr_err("%pfwP: number of interrupt identities not found\n",
> > + fwnode);
> > + return rc;
> > + }
> > + if ((global->nr_ids < IMSIC_MIN_ID) ||
> > + (global->nr_ids >= IMSIC_MAX_ID) ||
> > + ((global->nr_ids & IMSIC_MIN_ID) != IMSIC_MIN_ID)) {
> > + pr_err("%pfwP: invalid number of interrupt identities\n",
> > + fwnode);
> > + return -EINVAL;
> > + }
> > +
> > + /* Find number of guest interrupt identities */
> > + if (fwops->read_u32(fwnode, fwopaque, "riscv,num-guest-ids",
> > + &global->nr_guest_ids))
> > + global->nr_guest_ids = global->nr_ids;
> > + if ((global->nr_guest_ids < IMSIC_MIN_ID) ||
> > + (global->nr_guest_ids >= IMSIC_MAX_ID) ||
> > + ((global->nr_guest_ids & IMSIC_MIN_ID) != IMSIC_MIN_ID)) {
> > + pr_err("%pfwP: invalid number of guest interrupt identities\n",
> > + fwnode);
> > + return -EINVAL;
> > + }
>
> Please split the whole guest stuff out. It is totally unused!
The number of guest IDs is used by KVM RISC-V AIA support which
is in the pipeline. The KVM RISC-V only need imsic_get_global_config()
and imsic_get_local_config(). The "nr_guest_ids" is part of the
IMSIC global config.
>
> I've stopped reading. This needs structure, cleanups and a bit of
> taste. Not a lot of that here at the moment.
>
> M.
>
> --
> Without deviation from the norm, progress is not possible.
It took a while to address all your comments and I also got
preempted by other stuff. Sorry for the delay.
Regards,
Anup
More information about the linux-riscv
mailing list