[PATCH v10 5/6] cache: Add L2 cache management for Andes AX45MP RISC-V core
Lad, Prabhakar
prabhakar.csengg at gmail.com
Mon Jul 31 04:26:58 PDT 2023
Hi Emil,
Thank you for the review.
On Mon, Jul 31, 2023 at 9:53 AM Emil Renner Berthing
<emil.renner.berthing at canonical.com> wrote:
>
> On Sun, 2 Jul 2023 at 22:37, Prabhakar <prabhakar.csengg at gmail.com> wrote:
> >
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
> >
> > I/O Coherence Port (IOCP) provides an AXI interface for connecting
> > external non-caching masters, such as DMA controllers. The accesses
> > from IOCP are coherent with D-Caches and L2 Cache.
> >
> > IOCP is a specification option and is disabled on the Renesas RZ/Five
> > SoC due to this reason IP blocks using DMA will fail.
> >
> > The Andes AX45MP core has a Programmable Physical Memory Attributes (PMA)
> > block that allows dynamic adjustment of memory attributes in the runtime.
> > It contains a configurable amount of PMA entries implemented as CSR
> > registers to control the attributes of memory locations in interest.
> > Below are the memory attributes supported:
> > * Device, Non-bufferable
> > * Device, bufferable
> > * Memory, Non-cacheable, Non-bufferable
> > * Memory, Non-cacheable, Bufferable
> > * Memory, Write-back, No-allocate
> > * Memory, Write-back, Read-allocate
> > * Memory, Write-back, Write-allocate
> > * Memory, Write-back, Read and Write-allocate
> >
> > More info about PMA (section 10.3):
> > Link: http://www.andestech.com/wp-content/uploads/AX45MP-1C-Rev.-5.0.0-Datasheet.pdf
> >
> > As a workaround for SoCs with IOCP disabled CMO needs to be handled by
> > software. Firstly OpenSBI configures the memory region as
> > "Memory, Non-cacheable, Bufferable" and passes this region as a global
> > shared dma pool as a DT node. With DMA_GLOBAL_POOL enabled all DMA
> > allocations happen from this region and synchronization callbacks are
> > implemented to synchronize when doing DMA transactions.
> >
<snip>
> > +static const struct riscv_cache_ops ax45mp_cmo_ops = {
> > + .wback = &ax45mp_dma_cache_wback,
> > + .inv = &ax45mp_dma_cache_inv,
> > + .wback_inv = &ax45mp_dma_cache_wback_inv,
> > +};
>
> Hi Prabhakar,
>
> If you're respinning this patchset anyway, I think you can mark this
> struct as __initdata since it's only used by
> riscv_noncoherent_register_cache_ops which copies the contents.
>
Agreed, I will update it in the next version.
Cheers,
Prabhakar
More information about the linux-riscv
mailing list