[PATCH v3 6/7] PCI: microchip: Gather MSI information from hardware config registers
daire.mcnamara at microchip.com
daire.mcnamara at microchip.com
Fri Jul 28 06:14:00 PDT 2023
From: Daire McNamara <daire.mcnamara at microchip.com>
The PCIe Root Complex on PolarFire SoC is configured at bitstream creation
time using Libero. Key MSI-related parameters include the number of
MSIs (1/2/4/8/16/32) and the MSI address. In the device driver, extract
this information from hw registers at init time, and use it to configure
MSI system, including configuring MSI capability structure correctly in
configuration space.
Signed-off-by: Daire McNamara <daire.mcnamara at microchip.com>
Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
---
drivers/pci/controller/pcie-microchip-host.c | 65 +++++++++++---------
1 file changed, 37 insertions(+), 28 deletions(-)
diff --git a/drivers/pci/controller/pcie-microchip-host.c b/drivers/pci/controller/pcie-microchip-host.c
index 7b212eea42d2..ca13fd56a0d9 100644
--- a/drivers/pci/controller/pcie-microchip-host.c
+++ b/drivers/pci/controller/pcie-microchip-host.c
@@ -7,6 +7,7 @@
* Author: Daire McNamara <daire.mcnamara at microchip.com>
*/
+#include <linux/bitfield.h>
#include <linux/clk.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/irqdomain.h>
@@ -20,8 +21,7 @@
#include "../pci.h"
/* Number of MSI IRQs */
-#define MC_NUM_MSI_IRQS 32
-#define MC_NUM_MSI_IRQS_CODED 5
+#define MC_MAX_NUM_MSI_IRQS 32
/* PCIe Bridge Phy and Controller Phy offsets */
#define MC_PCIE1_BRIDGE_ADDR 0x00008000u
@@ -31,6 +31,11 @@
#define MC_PCIE_CTRL_ADDR (MC_PCIE1_CTRL_ADDR)
/* PCIe Bridge Phy Regs */
+#define PCIE_PCI_IRQ_DW0 0xa8
+#define MSIX_CAP_MASK BIT(31)
+#define NUM_MSI_MSGS_MASK GENMASK(6, 4)
+#define NUM_MSI_MSGS_SHIFT 4
+
#define IMASK_LOCAL 0x180
#define DMA_END_ENGINE_0_MASK 0x00000000u
#define DMA_END_ENGINE_0_SHIFT 0
@@ -79,7 +84,6 @@
#define IMASK_HOST 0x188
#define ISTATUS_HOST 0x18c
#define IMSI_ADDR 0x190
-#define MSI_ADDR 0x190
#define ISTATUS_MSI 0x194
/* PCIe Master table init defines */
@@ -158,8 +162,6 @@
/* PCIe Config space MSI capability structure */
#define MC_MSI_CAP_CTRL_OFFSET 0xe0u
-#define MC_MSI_MAX_Q_AVAIL (MC_NUM_MSI_IRQS_CODED << 1)
-#define MC_MSI_Q_SIZE (MC_NUM_MSI_IRQS_CODED << 4)
/* Events */
#define EVENT_PCIE_L2_EXIT 0
@@ -259,7 +261,7 @@ struct mc_msi {
struct irq_domain *dev_domain;
u32 num_vectors;
u64 vector_phy;
- DECLARE_BITMAP(used, MC_NUM_MSI_IRQS);
+ DECLARE_BITMAP(used, MC_MAX_NUM_MSI_IRQS);
};
struct mc_pcie {
@@ -382,25 +384,27 @@ static struct {
static char poss_clks[][5] = { "fic0", "fic1", "fic2", "fic3" };
-static void mc_pcie_enable_msi(struct mc_pcie *port, void __iomem *base)
+static void mc_pcie_enable_msi(struct mc_pcie *port, void __iomem *ecam)
{
struct mc_msi *msi = &port->msi;
- u32 cap_offset = MC_MSI_CAP_CTRL_OFFSET;
- u16 msg_ctrl = readw_relaxed(base + cap_offset + PCI_MSI_FLAGS);
+ u16 reg;
+ u8 queue_size;
- msg_ctrl |= PCI_MSI_FLAGS_ENABLE;
- msg_ctrl &= ~PCI_MSI_FLAGS_QMASK;
- msg_ctrl |= MC_MSI_MAX_Q_AVAIL;
- msg_ctrl &= ~PCI_MSI_FLAGS_QSIZE;
- msg_ctrl |= MC_MSI_Q_SIZE;
- msg_ctrl |= PCI_MSI_FLAGS_64BIT;
+ /* Fixup MSI enable flag */
+ reg = readw_relaxed(ecam + MC_MSI_CAP_CTRL_OFFSET + PCI_MSI_FLAGS);
+ reg |= PCI_MSI_FLAGS_ENABLE;
+ writew_relaxed(reg, ecam + MC_MSI_CAP_CTRL_OFFSET + PCI_MSI_FLAGS);
- writew_relaxed(msg_ctrl, base + cap_offset + PCI_MSI_FLAGS);
+ /* Fixup PCI MSI queue flags */
+ queue_size = FIELD_GET(PCI_MSI_FLAGS_QMASK, reg);
+ reg |= FIELD_PREP(PCI_MSI_FLAGS_QSIZE, queue_size);
+ writew_relaxed(reg, ecam + MC_MSI_CAP_CTRL_OFFSET + PCI_MSI_FLAGS);
+ /* Fixup MSI addr fields */
writel_relaxed(lower_32_bits(msi->vector_phy),
- base + cap_offset + PCI_MSI_ADDRESS_LO);
+ ecam + MC_MSI_CAP_CTRL_OFFSET + PCI_MSI_ADDRESS_LO);
writel_relaxed(upper_32_bits(msi->vector_phy),
- base + cap_offset + PCI_MSI_ADDRESS_HI);
+ ecam + MC_MSI_CAP_CTRL_OFFSET + PCI_MSI_ADDRESS_HI);
}
static void mc_handle_msi(struct irq_desc *desc)
@@ -473,10 +477,7 @@ static int mc_irq_msi_domain_alloc(struct irq_domain *domain, unsigned int virq,
{
struct mc_pcie *port = domain->host_data;
struct mc_msi *msi = &port->msi;
- void __iomem *bridge_base_addr =
- port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
unsigned long bit;
- u32 val;
mutex_lock(&msi->lock);
bit = find_first_zero_bit(msi->used, msi->num_vectors);
@@ -490,11 +491,6 @@ static int mc_irq_msi_domain_alloc(struct irq_domain *domain, unsigned int virq,
irq_domain_set_info(domain, virq, bit, &mc_msi_bottom_irq_chip,
domain->host_data, handle_edge_irq, NULL, NULL);
- /* Enable MSI interrupts */
- val = readl_relaxed(bridge_base_addr + IMASK_LOCAL);
- val |= PM_MSI_INT_MSI_MASK;
- writel_relaxed(val, bridge_base_addr + IMASK_LOCAL);
-
mutex_unlock(&msi->lock);
return 0;
@@ -1111,6 +1107,7 @@ static int mc_platform_init(struct pci_config_window *cfg)
struct mc_pcie *port;
void __iomem *bridge_base_addr;
int ret;
+ u32 val;
port = devm_kzalloc(dev, sizeof(*port), GFP_KERNEL);
if (!port)
@@ -1131,12 +1128,24 @@ static int mc_platform_init(struct pci_config_window *cfg)
bridge_base_addr = port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
- port->msi.vector_phy = MSI_ADDR;
- port->msi.num_vectors = MC_NUM_MSI_IRQS;
+ /* Allow enabling MSI by disabling MSI-X */
+ val = readl(bridge_base_addr + PCIE_PCI_IRQ_DW0);
+ val &= ~MSIX_CAP_MASK;
+ writel(val, bridge_base_addr + PCIE_PCI_IRQ_DW0);
/* Hardware doesn't setup MSI by default */
mc_pcie_enable_msi(port, cfg->win);
+ /* Pick num vectors from bitfile programmed onto FPGA fabric */
+ val = readl(bridge_base_addr + PCIE_PCI_IRQ_DW0);
+ val &= NUM_MSI_MSGS_MASK;
+ val >>= NUM_MSI_MSGS_SHIFT;
+
+ port->msi.num_vectors = 1 << val;
+
+ /* Pick vector address from design */
+ port->msi.vector_phy = readl_relaxed(bridge_base_addr + IMSI_ADDR);
+
/* Configure Address Translation Table 0 for PCIe config space */
mc_pcie_setup_window(bridge_base_addr, 0, cfg->res.start & 0xffffffff,
cfg->res.start, resource_size(&cfg->res));
--
2.25.1
More information about the linux-riscv
mailing list