[PATCH v7 12/12] KVM: arm64: Use TLBI range-based intructions for unmap
Raghavendra Rao Ananta
rananta at google.com
Mon Jul 24 09:47:46 PDT 2023
On Mon, Jul 24, 2023 at 2:35 AM Shaoqin Huang <shahuang at redhat.com> wrote:
>
> Hi Raghavendra,
>
> On 7/22/23 10:22, Raghavendra Rao Ananta wrote:
> > The current implementation of the stage-2 unmap walker traverses
> > the given range and, as a part of break-before-make, performs
> > TLB invalidations with a DSB for every PTE. A multitude of this
> > combination could cause a performance bottleneck on some systems.
> >
> > Hence, if the system supports FEAT_TLBIRANGE, defer the TLB
> > invalidations until the entire walk is finished, and then
> > use range-based instructions to invalidate the TLBs in one go.
> > Condition deferred TLB invalidation on the system supporting FWB,
> > as the optimization is entirely pointless when the unmap walker
> > needs to perform CMOs.
> >
> > Rename stage2_put_pte() to stage2_unmap_put_pte() as the function
> > now serves the stage-2 unmap walker specifically, rather than
> > acting generic.
> >
> > Signed-off-by: Raghavendra Rao Ananta <rananta at google.com>
> > ---
> > arch/arm64/kvm/hyp/pgtable.c | 67 +++++++++++++++++++++++++++++++-----
> > 1 file changed, 58 insertions(+), 9 deletions(-)
> >
> > diff --git a/arch/arm64/kvm/hyp/pgtable.c b/arch/arm64/kvm/hyp/pgtable.c
> > index 5ef098af1736..cf88933a2ea0 100644
> > --- a/arch/arm64/kvm/hyp/pgtable.c
> > +++ b/arch/arm64/kvm/hyp/pgtable.c
> > @@ -831,16 +831,54 @@ static void stage2_make_pte(const struct kvm_pgtable_visit_ctx *ctx, kvm_pte_t n
> > smp_store_release(ctx->ptep, new);
> > }
> >
> > -static void stage2_put_pte(const struct kvm_pgtable_visit_ctx *ctx, struct kvm_s2_mmu *mmu,
> > - struct kvm_pgtable_mm_ops *mm_ops)
> > +struct stage2_unmap_data {
> > + struct kvm_pgtable *pgt;
> > + bool defer_tlb_flush_init;
> > +};
> > +
> > +static bool __stage2_unmap_defer_tlb_flush(struct kvm_pgtable *pgt)
> > +{
> > + /*
> > + * If FEAT_TLBIRANGE is implemented, defer the individual
> > + * TLB invalidations until the entire walk is finished, and
> > + * then use the range-based TLBI instructions to do the
> > + * invalidations. Condition deferred TLB invalidation on the
> > + * system supporting FWB, as the optimization is entirely
> > + * pointless when the unmap walker needs to perform CMOs.
> > + */
> > + return system_supports_tlb_range() && stage2_has_fwb(pgt);
> > +}
> > +
> > +static bool stage2_unmap_defer_tlb_flush(struct stage2_unmap_data *unmap_data)
> > +{
> > + bool defer_tlb_flush = __stage2_unmap_defer_tlb_flush(unmap_data->pgt);
> > +
> > + /*
> > + * Since __stage2_unmap_defer_tlb_flush() is based on alternative
> > + * patching and the TLBIs' operations behavior depend on this,
> > + * track if there's any change in the state during the unmap sequence.
> > + */
> > + WARN_ON(unmap_data->defer_tlb_flush_init != defer_tlb_flush);
> > + return defer_tlb_flush;
> > +}
> > +
> > +static void stage2_unmap_put_pte(const struct kvm_pgtable_visit_ctx *ctx,
> > + struct kvm_s2_mmu *mmu,
> > + struct kvm_pgtable_mm_ops *mm_ops)
> > {
> > + struct stage2_unmap_data *unmap_data = ctx->arg;
> > +
> > /*
> > - * Clear the existing PTE, and perform break-before-make with
> > - * TLB maintenance if it was valid.
> > + * Clear the existing PTE, and perform break-before-make if it was
> > + * valid. Depending on the system support, the TLB maintenance for
> > + * the same can be deferred until the entire unmap is completed.
> > */
> > if (kvm_pte_valid(ctx->old)) {
> > kvm_clear_pte(ctx->ptep);
> > - kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, mmu, ctx->addr, ctx->level);
> > +
> > + if (!stage2_unmap_defer_tlb_flush(unmap_data))
> Why not directly check (unmap_data->defer_tlb_flush_init) here?
>
(Re-sending the reply as the previous one was formatted as HTML and
was blocked by many lists)
No particular reason per say, but I was just going with the logic of
determining if we need to defer the flush and the WARN_ON() parts
separate.
Any advantage if we directly check in stage2_unmap_put_pte() that I
missed or is this purely for readability?
> > + kvm_call_hyp(__kvm_tlb_flush_vmid_ipa, mmu,
> > + ctx->addr, ctx->level);
> Small indent hint. The ctx->addr can align with __kvm_tlb_flush_vmid_ipa.
>
Ah, yes. I'll adjust this if I send out a v8.
Thank you.
Raghavendra
> Thanks,
> Shaoqin
> > }
> >
> > mm_ops->put_page(ctx->ptep);
> > @@ -1070,7 +1108,8 @@ int kvm_pgtable_stage2_set_owner(struct kvm_pgtable *pgt, u64 addr, u64 size,
> > static int stage2_unmap_walker(const struct kvm_pgtable_visit_ctx *ctx,
> > enum kvm_pgtable_walk_flags visit)
> > {
> > - struct kvm_pgtable *pgt = ctx->arg;
> > + struct stage2_unmap_data *unmap_data = ctx->arg;
> > + struct kvm_pgtable *pgt = unmap_data->pgt;
> > struct kvm_s2_mmu *mmu = pgt->mmu;
> > struct kvm_pgtable_mm_ops *mm_ops = ctx->mm_ops;
> > kvm_pte_t *childp = NULL;
> > @@ -1098,7 +1137,7 @@ static int stage2_unmap_walker(const struct kvm_pgtable_visit_ctx *ctx,
> > * block entry and rely on the remaining portions being faulted
> > * back lazily.
> > */
> > - stage2_put_pte(ctx, mmu, mm_ops);
> > + stage2_unmap_put_pte(ctx, mmu, mm_ops);
> >
> > if (need_flush && mm_ops->dcache_clean_inval_poc)
> > mm_ops->dcache_clean_inval_poc(kvm_pte_follow(ctx->old, mm_ops),
> > @@ -1112,13 +1151,23 @@ static int stage2_unmap_walker(const struct kvm_pgtable_visit_ctx *ctx,
> >
> > int kvm_pgtable_stage2_unmap(struct kvm_pgtable *pgt, u64 addr, u64 size)
> > {
> > + int ret;
> > + struct stage2_unmap_data unmap_data = {
> > + .pgt = pgt,
> > + .defer_tlb_flush_init = __stage2_unmap_defer_tlb_flush(pgt),
> > + };
> > struct kvm_pgtable_walker walker = {
> > .cb = stage2_unmap_walker,
> > - .arg = pgt,
> > + .arg = &unmap_data,
> > .flags = KVM_PGTABLE_WALK_LEAF | KVM_PGTABLE_WALK_TABLE_POST,
> > };
> >
> > - return kvm_pgtable_walk(pgt, addr, size, &walker);
> > + ret = kvm_pgtable_walk(pgt, addr, size, &walker);
> > + if (stage2_unmap_defer_tlb_flush(&unmap_data))
> > + /* Perform the deferred TLB invalidations */
> > + kvm_tlb_flush_vmid_range(pgt->mmu, addr, size);
> > +
> > + return ret;
> > }
> >
> > struct stage2_attr_data {
>
> --
> Shaoqin
>
More information about the linux-riscv
mailing list