[PATCH 1/3] riscv: dts: thead: add BeagleV Ahead board device tree

[Guo Ren]

Reviewed-by: Guo Ren <guoren at kernel.org>

On Sun, Jul 23, 2023 at 5:56 AM Drew Fustini <dfustini at baylibre.com> wrote:
>
> The BeagleV Ahead single board computer uses the T-Head TH1520 SoC.
> Add a minimal device tree to support basic uart/gpio/dmac drivers so
> that a user can boot to a basic shell.
>
> Link: https://beagleboard.org/beaglev-ahead
> Signed-off-by: Drew Fustini <dfustini at baylibre.com>
> ---
>  arch/riscv/boot/dts/thead/Makefile                 |  2 +-
>  arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts | 61 ++++++++++++++++++++++
>  2 files changed, 62 insertions(+), 1 deletion(-)
>
> diff --git a/arch/riscv/boot/dts/thead/Makefile b/arch/riscv/boot/dts/thead/Makefile
> index e311fc9a5939..b55a17127c2b 100644
> --- a/arch/riscv/boot/dts/thead/Makefile
> +++ b/arch/riscv/boot/dts/thead/Makefile
> @@ -1,2 +1,2 @@
>  # SPDX-License-Identifier: GPL-2.0
> -dtb-$(CONFIG_ARCH_THEAD) += th1520-lichee-pi-4a.dtb
> +dtb-$(CONFIG_ARCH_THEAD) += th1520-lichee-pi-4a.dtb th1520-beaglev-ahead.dtb
> diff --git a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
> new file mode 100644
> index 000000000000..c315e5bd3d2d
> --- /dev/null
> +++ b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
> @@ -0,0 +1,61 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2023 Jisheng Zhang <jszhang at kernel.org>
> + * Copyright (C) 2023 Drew Fustini <dfustini at baylibre.com>
> + */
> +
> +/dts-v1/;
> +
> +#include "th1520.dtsi"
> +
> +/ {
> +       model = "BeagleV Ahead";
> +       compatible = "beagle,beaglev-ahead", "thead,th1520";
> +
> +       aliases {
> +               gpio0 = &gpio0;
> +               gpio1 = &gpio1;
> +               gpio2 = &gpio2;
> +               gpio3 = &gpio3;
> +               serial0 = &uart0;
> +               serial1 = &uart1;
> +               serial2 = &uart2;
> +               serial3 = &uart3;
> +               serial4 = &uart4;
> +               serial5 = &uart5;
> +       };
> +
> +       chosen {
> +               stdout-path = "serial0:115200n8";
> +       };
> +
> +       memory at 0 {
> +               device_type = "memory";
> +               reg = <0x0  0x00000000  0x1 0x00000000>;
> +
> +       };
> +};
> +
> +&osc {
> +       clock-frequency = <24000000>;
> +};
> +
> +&osc_32k {
> +       clock-frequency = <32768>;
> +};
> +
> +&apb_clk {
> +       clock-frequency = <62500000>;
> +};
> +
> +&uart_sclk {
> +       clock-frequency = <100000000>;
> +};
> +
> +&dmac0 {
> +       status = "okay";
> +};
> +
> +&uart0 {
> +       status = "okay";
> +};
>
> --
> 2.34.1
>


-- 
Best Regards
 Guo Ren