[PATCH v7 1/7] dt-bindings: clock: Add StarFive JH7110 PLL clock generator

Emil Renner Berthing emil.renner.berthing at canonical.com
Wed Jul 19 08:45:14 PDT 2023


On Mon, 17 Jul 2023 at 04:30, Xingyu Wu <xingyu.wu at starfivetech.com> wrote:
>
> Add bindings for the PLL clock generator on the JH7110 RISC-V SoC.
>
> Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski at linaro.org>

Reviewed-by: Emil Renner Berthing <emil.renner.berthing at canonical.com>

> Signed-off-by: Xingyu Wu <xingyu.wu at starfivetech.com>
> ---
>  .../bindings/clock/starfive,jh7110-pll.yaml   | 46 +++++++++++++++++++
>  .../dt-bindings/clock/starfive,jh7110-crg.h   |  6 +++
>  2 files changed, 52 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml
>
> diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml
> new file mode 100644
> index 000000000000..be8300ce86d0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml
> @@ -0,0 +1,46 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/clock/starfive,jh7110-pll.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: StarFive JH7110 PLL Clock Generator
> +
> +description:
> +  These PLLs are high speed, low jitter frequency synthesizers in the JH7110.
> +  Each PLL works in integer mode or fraction mode, with configuration
> +  registers in the sys syscon. So the PLLs node should be a child of
> +  SYS-SYSCON node.
> +  The formula for calculating frequency is
> +  Fvco = Fref * (NI + NF) / M / Q1
> +
> +maintainers:
> +  - Xingyu Wu <xingyu.wu at starfivetech.com>
> +
> +properties:
> +  compatible:
> +    const: starfive,jh7110-pll
> +
> +  clocks:
> +    maxItems: 1
> +    description: Main Oscillator (24 MHz)
> +
> +  '#clock-cells':
> +    const: 1
> +    description:
> +      See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
> +
> +required:
> +  - compatible
> +  - clocks
> +  - '#clock-cells'
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    clock-controller {
> +      compatible = "starfive,jh7110-pll";
> +      clocks = <&osc>;
> +      #clock-cells = <1>;
> +    };
> diff --git a/include/dt-bindings/clock/starfive,jh7110-crg.h b/include/dt-bindings/clock/starfive,jh7110-crg.h
> index 06257bfd9ac1..3fb5e31c3be4 100644
> --- a/include/dt-bindings/clock/starfive,jh7110-crg.h
> +++ b/include/dt-bindings/clock/starfive,jh7110-crg.h
> @@ -6,6 +6,12 @@
>  #ifndef __DT_BINDINGS_CLOCK_STARFIVE_JH7110_CRG_H__
>  #define __DT_BINDINGS_CLOCK_STARFIVE_JH7110_CRG_H__
>
> +/* PLL clocks */
> +#define JH7110_PLLCLK_PLL0_OUT                 0
> +#define JH7110_PLLCLK_PLL1_OUT                 1
> +#define JH7110_PLLCLK_PLL2_OUT                 2
> +#define JH7110_PLLCLK_END                      3
> +
>  /* SYSCRG clocks */
>  #define JH7110_SYSCLK_CPU_ROOT                 0
>  #define JH7110_SYSCLK_CPU_CORE                 1
> --
> 2.25.1
>



More information about the linux-riscv mailing list