[PATCH v6 11/14] irqchip: Add RISC-V advanced PLIC driver for direct-mode
Anup Patel
apatel at ventanamicro.com
Wed Jul 19 04:35:39 PDT 2023
The RISC-V advanced interrupt architecture (AIA) specification defines
advanced platform-level interrupt controller (APLIC) which has two modes
of operation: 1) Direct mode and 2) MSI mode.
(For more details, refer https://github.com/riscv/riscv-aia)
In APLIC direct-mode, wired interrupts are forwared to CPUs (or HARTs)
as a local external interrupt.
We add a platform irqchip driver for the RISC-V APLIC direct-mode to
support RISC-V platforms having only wired interrupts.
Signed-off-by: Anup Patel <apatel at ventanamicro.com>
---
drivers/irqchip/Kconfig | 5 +
drivers/irqchip/Makefile | 1 +
drivers/irqchip/irq-riscv-aplic-direct.c | 326 +++++++++++++++++++++++
drivers/irqchip/irq-riscv-aplic-main.c | 240 +++++++++++++++++
drivers/irqchip/irq-riscv-aplic-main.h | 45 ++++
include/linux/irqchip/riscv-aplic.h | 119 +++++++++
6 files changed, 736 insertions(+)
create mode 100644 drivers/irqchip/irq-riscv-aplic-direct.c
create mode 100644 drivers/irqchip/irq-riscv-aplic-main.c
create mode 100644 drivers/irqchip/irq-riscv-aplic-main.h
create mode 100644 include/linux/irqchip/riscv-aplic.h
diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
index d700980372ef..8875065d8af9 100644
--- a/drivers/irqchip/Kconfig
+++ b/drivers/irqchip/Kconfig
@@ -544,6 +544,11 @@ config SIFIVE_PLIC
select IRQ_DOMAIN_HIERARCHY
select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
+config RISCV_APLIC
+ bool
+ depends on RISCV
+ select IRQ_DOMAIN_HIERARCHY
+
config RISCV_IMSIC
bool
depends on RISCV
diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
index abca445a3229..7f8289790ed8 100644
--- a/drivers/irqchip/Makefile
+++ b/drivers/irqchip/Makefile
@@ -95,6 +95,7 @@ obj-$(CONFIG_QCOM_MPM) += irq-qcom-mpm.o
obj-$(CONFIG_CSKY_MPINTC) += irq-csky-mpintc.o
obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o
obj-$(CONFIG_RISCV_INTC) += irq-riscv-intc.o
+obj-$(CONFIG_RISCV_APLIC) += irq-riscv-aplic-main.o irq-riscv-aplic-direct.o
obj-$(CONFIG_RISCV_IMSIC) += irq-riscv-imsic-state.o irq-riscv-imsic-early.o irq-riscv-imsic-platform.o
obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o
obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o
diff --git a/drivers/irqchip/irq-riscv-aplic-direct.c b/drivers/irqchip/irq-riscv-aplic-direct.c
new file mode 100644
index 000000000000..e36d655a1490
--- /dev/null
+++ b/drivers/irqchip/irq-riscv-aplic-direct.c
@@ -0,0 +1,326 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Western Digital Corporation or its affiliates.
+ * Copyright (C) 2022 Ventana Micro Systems Inc.
+ */
+
+#include <linux/bitops.h>
+#include <linux/cpu.h>
+#include <linux/interrupt.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqchip/riscv-aplic.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/printk.h>
+#include <linux/smp.h>
+
+#include "irq-riscv-aplic-main.h"
+
+#define APLIC_DISABLE_IDELIVERY 0
+#define APLIC_ENABLE_IDELIVERY 1
+#define APLIC_DISABLE_ITHRESHOLD 1
+#define APLIC_ENABLE_ITHRESHOLD 0
+
+struct aplic_direct {
+ struct aplic_priv priv;
+ struct irq_domain *irqdomain;
+ struct cpumask lmask;
+};
+
+struct aplic_idc {
+ unsigned int hart_index;
+ void __iomem *regs;
+ struct aplic_direct *direct;
+};
+
+static unsigned int aplic_direct_parent_irq;
+static DEFINE_PER_CPU(struct aplic_idc, aplic_idcs);
+
+static void aplic_direct_irq_eoi(struct irq_data *d)
+{
+ /*
+ * The fasteoi_handler requires irq_eoi() callback hence
+ * provide a dummy handler.
+ */
+}
+
+#ifdef CONFIG_SMP
+static int aplic_direct_set_affinity(struct irq_data *d,
+ const struct cpumask *mask_val, bool force)
+{
+ struct aplic_priv *priv = irq_data_get_irq_chip_data(d);
+ struct aplic_direct *direct =
+ container_of(priv, struct aplic_direct, priv);
+ struct aplic_idc *idc;
+ unsigned int cpu, val;
+ struct cpumask amask;
+ void __iomem *target;
+
+ cpumask_and(&amask, &direct->lmask, mask_val);
+
+ if (force)
+ cpu = cpumask_first(&amask);
+ else
+ cpu = cpumask_any_and(&amask, cpu_online_mask);
+
+ if (cpu >= nr_cpu_ids)
+ return -EINVAL;
+
+ idc = per_cpu_ptr(&aplic_idcs, cpu);
+ target = priv->regs + APLIC_TARGET_BASE;
+ target += (d->hwirq - 1) * sizeof(u32);
+ val = idc->hart_index & APLIC_TARGET_HART_IDX_MASK;
+ val <<= APLIC_TARGET_HART_IDX_SHIFT;
+ val |= APLIC_DEFAULT_PRIORITY;
+ writel(val, target);
+
+ irq_data_update_effective_affinity(d, cpumask_of(cpu));
+
+ return IRQ_SET_MASK_OK_DONE;
+}
+#endif
+
+static struct irq_chip aplic_direct_chip = {
+ .name = "APLIC-DIRECT",
+ .irq_mask = aplic_irq_mask,
+ .irq_unmask = aplic_irq_unmask,
+ .irq_set_type = aplic_irq_set_type,
+ .irq_eoi = aplic_direct_irq_eoi,
+#ifdef CONFIG_SMP
+ .irq_set_affinity = aplic_direct_set_affinity,
+#endif
+ .flags = IRQCHIP_SET_TYPE_MASKED |
+ IRQCHIP_SKIP_SET_WAKE |
+ IRQCHIP_MASK_ON_SUSPEND,
+};
+
+static int aplic_direct_irqdomain_translate(struct irq_domain *d,
+ struct irq_fwspec *fwspec,
+ unsigned long *hwirq,
+ unsigned int *type)
+{
+ struct aplic_priv *priv = d->host_data;
+
+ return aplic_irqdomain_translate(fwspec, priv->gsi_base,
+ hwirq, type);
+}
+
+static int aplic_direct_irqdomain_alloc(struct irq_domain *domain,
+ unsigned int virq, unsigned int nr_irqs,
+ void *arg)
+{
+ int i, ret;
+ unsigned int type;
+ irq_hw_number_t hwirq;
+ struct irq_fwspec *fwspec = arg;
+ struct aplic_priv *priv = domain->host_data;
+ struct aplic_direct *direct =
+ container_of(priv, struct aplic_direct, priv);
+
+ ret = aplic_irqdomain_translate(fwspec, priv->gsi_base,
+ &hwirq, &type);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < nr_irqs; i++) {
+ irq_domain_set_info(domain, virq + i, hwirq + i,
+ &aplic_direct_chip, priv,
+ handle_fasteoi_irq, NULL, NULL);
+ irq_set_affinity(virq + i, &direct->lmask);
+ /* See the reason described in aplic_msi_irqdomain_alloc() */
+ irq_set_status_flags(virq + i, IRQ_DISABLE_UNLAZY);
+ }
+
+ return 0;
+}
+
+static const struct irq_domain_ops aplic_direct_irqdomain_ops = {
+ .translate = aplic_direct_irqdomain_translate,
+ .alloc = aplic_direct_irqdomain_alloc,
+ .free = irq_domain_free_irqs_top,
+};
+
+/*
+ * To handle an APLIC direct interrupts, we just read the CLAIMI register
+ * which will return highest priority pending interrupt and clear the
+ * pending bit of the interrupt. This process is repeated until CLAIMI
+ * register return zero value.
+ */
+static void aplic_direct_handle_irq(struct irq_desc *desc)
+{
+ struct aplic_idc *idc = this_cpu_ptr(&aplic_idcs);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ struct irq_domain *irqdomain = idc->direct->irqdomain;
+ irq_hw_number_t hw_irq;
+ int irq;
+
+ chained_irq_enter(chip, desc);
+
+ while ((hw_irq = readl(idc->regs + APLIC_IDC_CLAIMI))) {
+ hw_irq = hw_irq >> APLIC_IDC_TOPI_ID_SHIFT;
+ irq = irq_find_mapping(irqdomain, hw_irq);
+
+ if (unlikely(irq <= 0))
+ dev_warn_ratelimited(idc->direct->priv.dev,
+ "hw_irq %lu mapping not found\n",
+ hw_irq);
+ else
+ generic_handle_irq(irq);
+ }
+
+ chained_irq_exit(chip, desc);
+}
+
+static void aplic_idc_set_delivery(struct aplic_idc *idc, bool en)
+{
+ u32 de = (en) ? APLIC_ENABLE_IDELIVERY : APLIC_DISABLE_IDELIVERY;
+ u32 th = (en) ? APLIC_ENABLE_ITHRESHOLD : APLIC_DISABLE_ITHRESHOLD;
+
+ /* Priority must be less than threshold for interrupt triggering */
+ writel(th, idc->regs + APLIC_IDC_ITHRESHOLD);
+
+ /* Delivery must be set to 1 for interrupt triggering */
+ writel(de, idc->regs + APLIC_IDC_IDELIVERY);
+}
+
+static int aplic_direct_dying_cpu(unsigned int cpu)
+{
+ if (aplic_direct_parent_irq)
+ disable_percpu_irq(aplic_direct_parent_irq);
+
+ return 0;
+}
+
+static int aplic_direct_starting_cpu(unsigned int cpu)
+{
+ if (aplic_direct_parent_irq)
+ enable_percpu_irq(aplic_direct_parent_irq,
+ irq_get_trigger_type(aplic_direct_parent_irq));
+
+ return 0;
+}
+
+int aplic_direct_setup(struct device *dev, void __iomem *regs)
+{
+ int i, j, rc, cpu, setup_count = 0;
+ struct fwnode_reference_args parent;
+ struct aplic_direct *direct;
+ struct aplic_priv *priv;
+ struct irq_domain *domain;
+ unsigned long hartid;
+ struct aplic_idc *idc;
+ u32 val;
+
+ direct = kzalloc(sizeof(*direct), GFP_KERNEL);
+ if (!direct)
+ return -ENOMEM;
+ priv = &direct->priv;
+
+ rc = aplic_setup_priv(priv, dev, regs);
+ if (rc) {
+ dev_err(dev, "failed to create APLIC context\n");
+ kfree(direct);
+ return rc;
+ }
+
+ /* Setup per-CPU IDC and target CPU mask */
+ for (i = 0; i < priv->nr_idcs; i++) {
+ rc = fwnode_property_get_reference_args(dev->fwnode,
+ "interrupts-extended", "#interrupt-cells",
+ 0, i, &parent);
+ if (rc) {
+ dev_warn(dev, "parent irq for IDC%d not found\n", i);
+ continue;
+ }
+
+ /*
+ * Skip interrupts other than external interrupts for
+ * current privilege level.
+ */
+ if (parent.args[0] != RV_IRQ_EXT)
+ continue;
+
+ rc = riscv_get_intc_hartid(parent.fwnode, &hartid);
+ if (rc) {
+ dev_warn(dev, "invalid hartid for IDC%d\n", i);
+ continue;
+ }
+
+ cpu = riscv_hartid_to_cpuid(hartid);
+ if (cpu < 0) {
+ dev_warn(dev, "invalid cpuid for IDC%d\n", i);
+ continue;
+ }
+
+ cpumask_set_cpu(cpu, &direct->lmask);
+
+ idc = per_cpu_ptr(&aplic_idcs, cpu);
+ idc->hart_index = i;
+ idc->regs = priv->regs + APLIC_IDC_BASE + i * APLIC_IDC_SIZE;
+ idc->direct = direct;
+
+ aplic_idc_set_delivery(idc, true);
+
+ /*
+ * Boot cpu might not have APLIC hart_index = 0 so check
+ * and update target registers of all interrupts.
+ */
+ if (cpu == smp_processor_id() && idc->hart_index) {
+ val = idc->hart_index & APLIC_TARGET_HART_IDX_MASK;
+ val <<= APLIC_TARGET_HART_IDX_SHIFT;
+ val |= APLIC_DEFAULT_PRIORITY;
+ for (j = 1; j <= priv->nr_irqs; j++)
+ writel(val, priv->regs + APLIC_TARGET_BASE +
+ (j - 1) * sizeof(u32));
+ }
+
+ setup_count++;
+ }
+
+ /* Find parent domain and register chained handler */
+ domain = irq_find_matching_fwnode(riscv_get_intc_hwnode(),
+ DOMAIN_BUS_ANY);
+ if (!aplic_direct_parent_irq && domain) {
+ aplic_direct_parent_irq = irq_create_mapping(domain, RV_IRQ_EXT);
+ if (aplic_direct_parent_irq) {
+ irq_set_chained_handler(aplic_direct_parent_irq,
+ aplic_direct_handle_irq);
+
+ /*
+ * Setup CPUHP notifier to enable parent
+ * interrupt on all CPUs
+ */
+ cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
+ "irqchip/riscv/aplic:starting",
+ aplic_direct_starting_cpu,
+ aplic_direct_dying_cpu);
+ }
+ }
+
+ /* Fail if we were not able to setup IDC for any CPU */
+ if (!setup_count) {
+ kfree(direct);
+ return -ENODEV;
+ }
+
+ /* Setup global config and interrupt delivery */
+ aplic_init_hw_global(priv, false);
+
+ /* Create irq domain instance for the APLIC */
+ direct->irqdomain = irq_domain_create_linear(dev->fwnode,
+ priv->nr_irqs + 1,
+ &aplic_direct_irqdomain_ops,
+ priv);
+ if (!direct->irqdomain) {
+ dev_err(dev, "failed to create direct irq domain\n");
+ kfree(direct);
+ return -ENOMEM;
+ }
+
+ /* Advertise the interrupt controller */
+ dev_info(dev, "%d interrupts directly connected to %d CPUs\n",
+ priv->nr_irqs, priv->nr_idcs);
+
+ return 0;
+}
diff --git a/drivers/irqchip/irq-riscv-aplic-main.c b/drivers/irqchip/irq-riscv-aplic-main.c
new file mode 100644
index 000000000000..d62a096774c4
--- /dev/null
+++ b/drivers/irqchip/irq-riscv-aplic-main.c
@@ -0,0 +1,240 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2021 Western Digital Corporation or its affiliates.
+ * Copyright (C) 2022 Ventana Micro Systems Inc.
+ */
+
+#include <linux/printk.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/irqchip/riscv-aplic.h>
+
+#include "irq-riscv-aplic-main.h"
+
+void aplic_irq_unmask(struct irq_data *d)
+{
+ struct aplic_priv *priv = irq_data_get_irq_chip_data(d);
+
+ writel(d->hwirq, priv->regs + APLIC_SETIENUM);
+}
+
+void aplic_irq_mask(struct irq_data *d)
+{
+ struct aplic_priv *priv = irq_data_get_irq_chip_data(d);
+
+ writel(d->hwirq, priv->regs + APLIC_CLRIENUM);
+}
+
+int aplic_irq_set_type(struct irq_data *d, unsigned int type)
+{
+ u32 val = 0;
+ void __iomem *sourcecfg;
+ struct aplic_priv *priv = irq_data_get_irq_chip_data(d);
+
+ switch (type) {
+ case IRQ_TYPE_NONE:
+ val = APLIC_SOURCECFG_SM_INACTIVE;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ val = APLIC_SOURCECFG_SM_LEVEL_LOW;
+ break;
+ case IRQ_TYPE_LEVEL_HIGH:
+ val = APLIC_SOURCECFG_SM_LEVEL_HIGH;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ val = APLIC_SOURCECFG_SM_EDGE_FALL;
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ val = APLIC_SOURCECFG_SM_EDGE_RISE;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ sourcecfg = priv->regs + APLIC_SOURCECFG_BASE;
+ sourcecfg += (d->hwirq - 1) * sizeof(u32);
+ writel(val, sourcecfg);
+
+ return 0;
+}
+
+int aplic_irqdomain_translate(struct irq_fwspec *fwspec, u32 gsi_base,
+ unsigned long *hwirq, unsigned int *type)
+{
+ if (WARN_ON(fwspec->param_count < 2))
+ return -EINVAL;
+ if (WARN_ON(!fwspec->param[0]))
+ return -EINVAL;
+
+ /* For DT, gsi_base is always zero. */
+ *hwirq = fwspec->param[0] - gsi_base;
+ *type = fwspec->param[1] & IRQ_TYPE_SENSE_MASK;
+
+ WARN_ON(*type == IRQ_TYPE_NONE);
+
+ return 0;
+}
+
+void aplic_init_hw_global(struct aplic_priv *priv, bool msi_mode)
+{
+ u32 val;
+#ifdef CONFIG_RISCV_M_MODE
+ u32 valH;
+
+ if (msi_mode) {
+ val = priv->msicfg.base_ppn;
+ valH = ((u64)priv->msicfg.base_ppn >> 32) &
+ APLIC_xMSICFGADDRH_BAPPN_MASK;
+ valH |= (priv->msicfg.lhxw & APLIC_xMSICFGADDRH_LHXW_MASK)
+ << APLIC_xMSICFGADDRH_LHXW_SHIFT;
+ valH |= (priv->msicfg.hhxw & APLIC_xMSICFGADDRH_HHXW_MASK)
+ << APLIC_xMSICFGADDRH_HHXW_SHIFT;
+ valH |= (priv->msicfg.lhxs & APLIC_xMSICFGADDRH_LHXS_MASK)
+ << APLIC_xMSICFGADDRH_LHXS_SHIFT;
+ valH |= (priv->msicfg.hhxs & APLIC_xMSICFGADDRH_HHXS_MASK)
+ << APLIC_xMSICFGADDRH_HHXS_SHIFT;
+ writel(val, priv->regs + APLIC_xMSICFGADDR);
+ writel(valH, priv->regs + APLIC_xMSICFGADDRH);
+ }
+#endif
+
+ /* Setup APLIC domaincfg register */
+ val = readl(priv->regs + APLIC_DOMAINCFG);
+ val |= APLIC_DOMAINCFG_IE;
+ if (msi_mode)
+ val |= APLIC_DOMAINCFG_DM;
+ writel(val, priv->regs + APLIC_DOMAINCFG);
+ if (readl(priv->regs + APLIC_DOMAINCFG) != val)
+ dev_warn(priv->dev, "unable to write 0x%x in domaincfg\n",
+ val);
+}
+
+static void aplic_init_hw_irqs(struct aplic_priv *priv)
+{
+ int i;
+
+ /* Disable all interrupts */
+ for (i = 0; i <= priv->nr_irqs; i += 32)
+ writel(-1U, priv->regs + APLIC_CLRIE_BASE +
+ (i / 32) * sizeof(u32));
+
+ /* Set interrupt type and default priority for all interrupts */
+ for (i = 1; i <= priv->nr_irqs; i++) {
+ writel(0, priv->regs + APLIC_SOURCECFG_BASE +
+ (i - 1) * sizeof(u32));
+ writel(APLIC_DEFAULT_PRIORITY,
+ priv->regs + APLIC_TARGET_BASE +
+ (i - 1) * sizeof(u32));
+ }
+
+ /* Clear APLIC domaincfg */
+ writel(0, priv->regs + APLIC_DOMAINCFG);
+}
+
+int aplic_setup_priv(struct aplic_priv *priv, struct device *dev,
+ void __iomem *regs)
+{
+ struct fwnode_reference_args parent;
+ int rc;
+
+ /* Save device pointer and register base */
+ priv->dev = dev;
+ priv->regs = regs;
+
+ /*
+ * Find out GSI base number
+ *
+ * Note: DT does not define "riscv,gsi-base" property so GSI
+ * base is always zero for DT.
+ */
+ rc = fwnode_property_read_u32_array(dev->fwnode, "riscv,gsi-base",
+ &priv->gsi_base, 1);
+ if (rc)
+ priv->gsi_base = 0;
+
+ /* Find out number of interrupt sources */
+ rc = fwnode_property_read_u32_array(dev->fwnode, "riscv,num-sources",
+ &priv->nr_irqs, 1);
+ if (rc) {
+ dev_err(dev, "failed to get number of interrupt sources\n");
+ return rc;
+ }
+
+ /* Setup initial state APLIC interrupts */
+ aplic_init_hw_irqs(priv);
+
+ /*
+ * Find out number of IDCs based on parent interrupts
+ *
+ * If "msi-parent" property is present then we ignore the
+ * APLIC IDCs which forces the APLIC driver to use MSI mode.
+ */
+ if (!fwnode_property_present(dev->fwnode, "msi-parent")) {
+ while (!fwnode_property_get_reference_args(dev->fwnode,
+ "interrupts-extended", "#interrupt-cells",
+ 0, priv->nr_idcs, &parent))
+ priv->nr_idcs++;
+ }
+
+ return 0;
+}
+
+static int aplic_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ void __iomem *regs;
+ int rc;
+
+ /* Map the MMIO registers */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(dev, "failed to get MMIO resource\n");
+ return -EINVAL;
+ }
+ regs = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ if (!regs) {
+ dev_err(dev, "failed map MMIO registers\n");
+ return -ENOMEM;
+ }
+
+ /*
+ * If msi-parent property is present then setup APLIC MSI mode
+ * otherwise setup APLIC direct mode.
+ */
+ if (fwnode_property_present(dev->fwnode, "msi-parent"))
+ rc = -ENODEV;
+ else
+ rc = aplic_direct_setup(dev, regs);
+ if (rc) {
+ dev_err(dev, "failed setup APLIC in %s mode\n",
+ fwnode_property_present(dev->fwnode, "msi-parent") ?
+ "MSI" : "direct");
+ return rc;
+ }
+
+ return 0;
+}
+
+static const struct of_device_id aplic_match[] = {
+ { .compatible = "riscv,aplic" },
+ {}
+};
+
+static struct platform_driver aplic_driver = {
+ .driver = {
+ .name = "riscv-aplic",
+ .of_match_table = aplic_match,
+ },
+ .probe = aplic_probe,
+};
+
+static int __init aplic_init(void)
+{
+ /*
+ * Register APLIC driver as early as possible so that APLIC
+ * platform device is probed as soon as it is created.
+ */
+ return platform_driver_register(&aplic_driver);
+}
+core_initcall(aplic_init);
diff --git a/drivers/irqchip/irq-riscv-aplic-main.h b/drivers/irqchip/irq-riscv-aplic-main.h
new file mode 100644
index 000000000000..474a04229334
--- /dev/null
+++ b/drivers/irqchip/irq-riscv-aplic-main.h
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2021 Western Digital Corporation or its affiliates.
+ * Copyright (C) 2022 Ventana Micro Systems Inc.
+ */
+
+#ifndef _IRQ_RISCV_APLIC_MAIN_H
+#define _IRQ_RISCV_APLIC_MAIN_H
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
+#include <linux/fwnode.h>
+
+#define APLIC_DEFAULT_PRIORITY 1
+
+struct aplic_msicfg {
+ phys_addr_t base_ppn;
+ u32 hhxs;
+ u32 hhxw;
+ u32 lhxs;
+ u32 lhxw;
+};
+
+struct aplic_priv {
+ struct device *dev;
+ u32 gsi_base;
+ u32 nr_irqs;
+ u32 nr_idcs;
+ void __iomem *regs;
+ struct aplic_msicfg msicfg;
+};
+
+void aplic_irq_unmask(struct irq_data *d);
+void aplic_irq_mask(struct irq_data *d);
+int aplic_irq_set_type(struct irq_data *d, unsigned int type);
+int aplic_irqdomain_translate(struct irq_fwspec *fwspec, u32 gsi_base,
+ unsigned long *hwirq, unsigned int *type);
+void aplic_init_hw_global(struct aplic_priv *priv, bool msi_mode);
+int aplic_setup_priv(struct aplic_priv *priv, struct device *dev,
+ void __iomem *regs);
+int aplic_direct_setup(struct device *dev, void __iomem *regs);
+
+#endif
diff --git a/include/linux/irqchip/riscv-aplic.h b/include/linux/irqchip/riscv-aplic.h
new file mode 100644
index 000000000000..97e198ea0109
--- /dev/null
+++ b/include/linux/irqchip/riscv-aplic.h
@@ -0,0 +1,119 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2021 Western Digital Corporation or its affiliates.
+ * Copyright (C) 2022 Ventana Micro Systems Inc.
+ */
+#ifndef __LINUX_IRQCHIP_RISCV_APLIC_H
+#define __LINUX_IRQCHIP_RISCV_APLIC_H
+
+#include <linux/bitops.h>
+
+#define APLIC_MAX_IDC BIT(14)
+#define APLIC_MAX_SOURCE 1024
+
+#define APLIC_DOMAINCFG 0x0000
+#define APLIC_DOMAINCFG_RDONLY 0x80000000
+#define APLIC_DOMAINCFG_IE BIT(8)
+#define APLIC_DOMAINCFG_DM BIT(2)
+#define APLIC_DOMAINCFG_BE BIT(0)
+
+#define APLIC_SOURCECFG_BASE 0x0004
+#define APLIC_SOURCECFG_D BIT(10)
+#define APLIC_SOURCECFG_CHILDIDX_MASK 0x000003ff
+#define APLIC_SOURCECFG_SM_MASK 0x00000007
+#define APLIC_SOURCECFG_SM_INACTIVE 0x0
+#define APLIC_SOURCECFG_SM_DETACH 0x1
+#define APLIC_SOURCECFG_SM_EDGE_RISE 0x4
+#define APLIC_SOURCECFG_SM_EDGE_FALL 0x5
+#define APLIC_SOURCECFG_SM_LEVEL_HIGH 0x6
+#define APLIC_SOURCECFG_SM_LEVEL_LOW 0x7
+
+#define APLIC_MMSICFGADDR 0x1bc0
+#define APLIC_MMSICFGADDRH 0x1bc4
+#define APLIC_SMSICFGADDR 0x1bc8
+#define APLIC_SMSICFGADDRH 0x1bcc
+
+#ifdef CONFIG_RISCV_M_MODE
+#define APLIC_xMSICFGADDR APLIC_MMSICFGADDR
+#define APLIC_xMSICFGADDRH APLIC_MMSICFGADDRH
+#else
+#define APLIC_xMSICFGADDR APLIC_SMSICFGADDR
+#define APLIC_xMSICFGADDRH APLIC_SMSICFGADDRH
+#endif
+
+#define APLIC_xMSICFGADDRH_L BIT(31)
+#define APLIC_xMSICFGADDRH_HHXS_MASK 0x1f
+#define APLIC_xMSICFGADDRH_HHXS_SHIFT 24
+#define APLIC_xMSICFGADDRH_LHXS_MASK 0x7
+#define APLIC_xMSICFGADDRH_LHXS_SHIFT 20
+#define APLIC_xMSICFGADDRH_HHXW_MASK 0x7
+#define APLIC_xMSICFGADDRH_HHXW_SHIFT 16
+#define APLIC_xMSICFGADDRH_LHXW_MASK 0xf
+#define APLIC_xMSICFGADDRH_LHXW_SHIFT 12
+#define APLIC_xMSICFGADDRH_BAPPN_MASK 0xfff
+
+#define APLIC_xMSICFGADDR_PPN_SHIFT 12
+
+#define APLIC_xMSICFGADDR_PPN_HART(__lhxs) \
+ (BIT(__lhxs) - 1)
+
+#define APLIC_xMSICFGADDR_PPN_LHX_MASK(__lhxw) \
+ (BIT(__lhxw) - 1)
+#define APLIC_xMSICFGADDR_PPN_LHX_SHIFT(__lhxs) \
+ ((__lhxs))
+#define APLIC_xMSICFGADDR_PPN_LHX(__lhxw, __lhxs) \
+ (APLIC_xMSICFGADDR_PPN_LHX_MASK(__lhxw) << \
+ APLIC_xMSICFGADDR_PPN_LHX_SHIFT(__lhxs))
+
+#define APLIC_xMSICFGADDR_PPN_HHX_MASK(__hhxw) \
+ (BIT(__hhxw) - 1)
+#define APLIC_xMSICFGADDR_PPN_HHX_SHIFT(__hhxs) \
+ ((__hhxs) + APLIC_xMSICFGADDR_PPN_SHIFT)
+#define APLIC_xMSICFGADDR_PPN_HHX(__hhxw, __hhxs) \
+ (APLIC_xMSICFGADDR_PPN_HHX_MASK(__hhxw) << \
+ APLIC_xMSICFGADDR_PPN_HHX_SHIFT(__hhxs))
+
+#define APLIC_IRQBITS_PER_REG 32
+
+#define APLIC_SETIP_BASE 0x1c00
+#define APLIC_SETIPNUM 0x1cdc
+
+#define APLIC_CLRIP_BASE 0x1d00
+#define APLIC_CLRIPNUM 0x1ddc
+
+#define APLIC_SETIE_BASE 0x1e00
+#define APLIC_SETIENUM 0x1edc
+
+#define APLIC_CLRIE_BASE 0x1f00
+#define APLIC_CLRIENUM 0x1fdc
+
+#define APLIC_SETIPNUM_LE 0x2000
+#define APLIC_SETIPNUM_BE 0x2004
+
+#define APLIC_GENMSI 0x3000
+
+#define APLIC_TARGET_BASE 0x3004
+#define APLIC_TARGET_HART_IDX_SHIFT 18
+#define APLIC_TARGET_HART_IDX_MASK 0x3fff
+#define APLIC_TARGET_GUEST_IDX_SHIFT 12
+#define APLIC_TARGET_GUEST_IDX_MASK 0x3f
+#define APLIC_TARGET_IPRIO_MASK 0xff
+#define APLIC_TARGET_EIID_MASK 0x7ff
+
+#define APLIC_IDC_BASE 0x4000
+#define APLIC_IDC_SIZE 32
+
+#define APLIC_IDC_IDELIVERY 0x00
+
+#define APLIC_IDC_IFORCE 0x04
+
+#define APLIC_IDC_ITHRESHOLD 0x08
+
+#define APLIC_IDC_TOPI 0x18
+#define APLIC_IDC_TOPI_ID_SHIFT 16
+#define APLIC_IDC_TOPI_ID_MASK 0x3ff
+#define APLIC_IDC_TOPI_PRIO_MASK 0xff
+
+#define APLIC_IDC_CLAIMI 0x1c
+
+#endif
--
2.34.1
More information about the linux-riscv
mailing list