[PATCH] selftests/riscv: fix potential build failure during the "emit_tests" step
Alexandre Ghiti
alex at ghiti.fr
Thu Jul 13 04:51:01 PDT 2023
Hi John,
On 12/07/2023 21:35, John Hubbard wrote:
> The riscv selftests (which were modeled after the arm64 selftests) are
> improperly declaring the "emit_tests" target to depend upon the "all"
> target. This approach, when combined with commit 9fc96c7c19df
> ("selftests: error out if kernel header files are not yet built"), has
> caused build failures [1] on arm64, and is likely to cause similar
> failures for riscv.
>
> To fix this, simply remove the unnecessary "all" dependency from the
> emit_tests target. The dependency is still effectively honored, because
> again, invocation is via "install", which also depends upon "all".
>
> An alternative approach would be to harden the emit_tests target so that
> it can depend upon "all", but that's a lot more complicated and hard to
> get right, and doesn't seem worth it, especially given that emit_tests
> should probably not be overridden at all.
>
> [1] https://lore.kernel.org/20230710-kselftest-fix-arm64-v1-1-48e872844f25@kernel.org
>
> Fixes: 9fc96c7c19df ("selftests: error out if kernel header files are not yet built")
> Signed-off-by: John Hubbard <jhubbard at nvidia.com>
> ---
>
> Andrew,
>
> With this, and with my arm64 fix [2] that you've already put into
> mm-unstable, you should be able to safely drop commit 819187ab8741
> ("selftests: fix arm64 test installation").
>
> [2] https://lore.kernel.org/20230711005629.2547838-1-jhubbard@nvidia.com
>
> thanks,
> John Hubbard
>
>
> tools/testing/selftests/riscv/Makefile | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/tools/testing/selftests/riscv/Makefile b/tools/testing/selftests/riscv/Makefile
> index 9dd629cc86aa..f4b3d5c9af5b 100644
> --- a/tools/testing/selftests/riscv/Makefile
> +++ b/tools/testing/selftests/riscv/Makefile
> @@ -43,7 +43,7 @@ run_tests: all
> done
>
> # Avoid any output on non riscv on emit_tests
> -emit_tests: all
> +emit_tests:
> @for DIR in $(RISCV_SUBTARGETS); do \
> BUILD_TARGET=$(OUTPUT)/$$DIR; \
> $(MAKE) OUTPUT=$$BUILD_TARGET -C $$DIR $@; \
>
> base-commit: 3f01e9fed8454dcd89727016c3e5b2fbb8f8e50c
> prerequisite-patch-id: 37c92f7425689ff069fb83996a25cd98e78d7242
Perfect timing, I have just encountered this failure this morning:
make[5]: *** [../../lib.mk:81: kernel_header_files] Error 1
that your patch fixed :) So you can add:
Tested-by: Alexandre Ghiti <alexghiti at rivosinc.com>
Thank you!
Alex
More information about the linux-riscv
mailing list