[External] Re: [PATCH v2 1/3] riscv: obtain ACPI RSDP from FFI.

[Conor Dooley]

Hey,

On Mon, Jul 03, 2023 at 03:19:01PM +0800, 运辉崔 wrote:
> On Sun, Jul 2, 2023 at 9:48 PM Conor Dooley <conor at kernel.org> wrote:
> >
> > %subject: riscv: obtain ACPI RSDP from FFI.
> >
> > This subject is a bit unhelpful because FFI would commonly mean "foreign
> > function interface" & you have not yet introduced it. It seems like it
> > would be better to do s/FFI/devicetree/ or similar.
> 
> FFI: FDT FIRMWARE INTERFACE.
> 
> You are right, s/FFI/devicetree/ is of course possible， but I actually
> want to use FFI as a general solution, put all relevant codes under
> driver/firmware/, and use RISC-V arch to call general codes.

Yes, I read the patchset. It's still unhelpful to someone reading
$subject because nobody knows what your version of FFI is IMO.

> In this case, only one Kconfig CONFIG_FDT_FW_INTERFACE is enough， and
> The FFI code will be placed first in the patchset.
> 
> But Ard's suggestion is to put the part of SMBIOS in the generic code,
> and put the FFI for ACPI in the RISCV arch.
> 
> Please see  the v1:
> https://patches.linaro.org/project/linux-acpi/patch/20230426034001.16-1-cuiyunhui@bytedance.com/

I read this too, I was following along with the discussion on the v1.

> Put the following to /driver/firmware/ffi.c , What do you think?
> void __init ffi_acpi_root_pointer(void)
> {
>     ...
> }

Usually the NOP versions just go in the headers.

> > Please also drop the full stop from the commit messages ;)
> Okay, thanks.
> 
> >
> > Please use a cover letter for multi-patch series & include changelogs.
> OK, On v3 I would use.
> 
> >
> > +CC Sunil, Alex:
> >
> > Can you guys please take a look at this & see if it is something that we
> > want to do (ACPI without EFI)?
> >
> > On Sun, Jul 02, 2023 at 05:57:32PM +0800, Yunhui Cui wrote:
> > > 1. We need to enable the ACPI function on RISC-V.
> >
> > RISC-V already supports ACPI, the "we" in this commit message is
> > confusing. Who is "we"? Bytedance?

Who is the "we"?

> > > When booting with
> > > Coreboot, we encounter two problems:
> > > a. Coreboot does not support EFI
> >
> >
> > > b. On RISC-V, only the DTS channel can be used.
> >
> > We support ACPI, so this seems inaccurate. Could you explain it better
> > please?
> 
> Yes, Sunil already supports ACPI, But it is based on EDK2 boot which
> supports EFI.
> In fact, We use Coreboot which has the features of a and b above.

My point is that the commit message has gaps in it.
This point b & point 1 make it seem like this patch adds ACPI support to
an architecture that only supports devicetree. "DTS channel" needs to be
explained further, to be frank I have no idea what that means. Does it
mean that coreboot on RISC-V only supports DT, or that the RISC-V linux
kernel requires a mini-DT when booting with EFI?

> > > 2. Based on this, we have added an interface for obtaining firmware
> > > information transfer through FDT, named FFI.
> >
> > Please use the long form of "FFI" before using the short form, since you
> > are inventing this & noone knows what it means yet.
> >
> > > 3. We not only use FFI to pass ACPI RSDP, but also pass other
> > > firmware information as an extension.
> >
> > This patch doesn't do that though?
> 
> Similar problems may be encountered on other arches, which is also the
> purpose of this sentence.

Right, but that has nothing to do with this patch? This patch only
implements the ACPI side of things for RISC-V, it doesn't do the SMBIOS
stuff. Leave that for the patch that actually does that please.

> > > +RISC-V FDT FIRMWARE INTERFACE (FFI) SUPPORT
> > > +M:     Yunhui Cui cuiyunhui at bytedance.com
> > > +S:     Maintained
> > > +F:     arch/riscv/include/asm/ffi.h
> > > +F:     arch/riscv/kernel/ffi.c
> >
> > Please add this in alphabetical order, these entries have recently been
> > resorted. That said, maintainers entry for a trivial file in arch code
> > seems a wee bit odd, seems like it would be better suited rolled up into
> > your other entry for the interface, like how Ard's one looks for EFI?
> >
> > > diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
> > > index b49793cf34eb..2e1c40fb2300 100644
> > > --- a/arch/riscv/Kconfig
> > > +++ b/arch/riscv/Kconfig
> > > @@ -785,6 +785,16 @@ config EFI
> > >         allow the kernel to be booted as an EFI application. This
> > >         is only useful on systems that have UEFI firmware.
> > >
> > > +config FFI
> > > +     bool "Fdt firmware interface"
> > > +     depends on OF
> > > +     default y
> > > +     help
> > > +       Added an interface to obtain firmware information transfer
> > > +       through FDT, named FFI. Some bootloaders do not support EFI,
> > > +       such as coreboot.
> > > +       We can pass firmware information through FFI, such as ACPI.
> >
> > I don't understand your Kconfig setup. Why don't you just have one
> > option (the one from patch 2/3), instead of adding 2 different but
> > similarly named options?
> OK, let me try it， and use the Kconfig CONFIG_FDT_FW_INTERFACE.  EFI
> seems to use two...

It doesn't use two different options, AFAIR. There's an EFI option in
the arch Kconfigs and then a menu in drivers/firmware/efi/Kconfig that
allows enabling sub-components. You've got two entries that appear
unrelated, despite parsing the same DT bits.

> 
> > >  config CC_HAVE_STACKPROTECTOR_TLS
> > >       def_bool $(cc-option,-mstack-protector-guard=tls -mstack-protector-guard-reg=tp -mstack-protector-guard-offset=0)
> > >
> > > diff --git a/arch/riscv/include/asm/acpi.h b/arch/riscv/include/asm/acpi.h
> > > index f71ce21ff684..f9d1625dd159 100644
> > > --- a/arch/riscv/include/asm/acpi.h
> > > +++ b/arch/riscv/include/asm/acpi.h
> > > @@ -15,6 +15,8 @@
> > >  /* Basic configuration for ACPI */
> > >  #ifdef CONFIG_ACPI
> > >
> > > +#include <asm/ffi.h>
> > > +
> > >  typedef u64 phys_cpuid_t;
> > >  #define PHYS_CPUID_INVALID INVALID_HARTID
> > >
> > > @@ -66,6 +68,13 @@ int acpi_get_riscv_isa(struct acpi_table_header *table,
> > >                      unsigned int cpu, const char **isa);
> > >
> > >  static inline int acpi_numa_get_nid(unsigned int cpu) { return NUMA_NO_NODE; }
> > > +
> > > +#define ACPI_HAVE_ARCH_GET_ROOT_POINTER
> >
> > How come this is not set in Kconfig like HAVE_FOO options usually are?

> This is modeled after x86 historical code.
> See arch/x86/include/asm/acpi.h

Is that a good reason for propagating the pattern? Is there a benefit to
this, other than "x86 did this"?

> > > +static inline u64 acpi_arch_get_root_pointer(void)
> > > +{
> > > +     return acpi_rsdp;
> > > +}
> > > +
> > >  #else
> > >  static inline void acpi_init_rintc_map(void) { }
> > >  static inline struct acpi_madt_rintc *acpi_cpu_get_madt_rintc(int cpu)
> > > diff --git a/arch/riscv/include/asm/ffi.h b/arch/riscv/include/asm/ffi.h
> > > new file mode 100644
> > > index 000000000000..847af02abd87
> > > --- /dev/null
> > > +++ b/arch/riscv/include/asm/ffi.h
> > > @@ -0,0 +1,9 @@
> > > +/* SPDX-License-Identifier: GPL-2.0 */
> > > +
> > > +#ifndef _ASM_FFI_H
> > > +#define _ASM_FFI_H
> > > +
> > > +extern u64 acpi_rsdp;
> >
> > /stuff/linux/drivers/acpi/osl.c:178:22: error: redefinition of 'acpi_rsdp' with a different type: 'unsigned long' vs 'u64' (aka 'unsigned long long')
> >
> > Fails to build when Kexec is enabled.
> 
> Rename my acpi_rsdp to arch_acpi_rsdp? WDYT?

You could do s/arch/riscv/ either, that'd match what we prefix a lot of
stuff with.

> > > diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
> > > index 506cc4a9a45a..274e06f4da33 100644
> > > --- a/arch/riscv/kernel/Makefile
> > > +++ b/arch/riscv/kernel/Makefile
> > > @@ -92,6 +92,7 @@ obj-$(CONFIG_CRASH_CORE)    += crash_core.o
> > >  obj-$(CONFIG_JUMP_LABEL)     += jump_label.o
> > >
> > >  obj-$(CONFIG_EFI)            += efi.o
> > > +obj-$(CONFIG_FFI)              += ffi.o
> >
> > This file uses tabs for alignment, not spaces.
> Okay, got it.
> 
> >
> > >  obj-$(CONFIG_COMPAT)         += compat_syscall_table.o
> > >  obj-$(CONFIG_COMPAT)         += compat_signal.o
> > >  obj-$(CONFIG_COMPAT)         += compat_vdso/
> > > diff --git a/arch/riscv/kernel/ffi.c b/arch/riscv/kernel/ffi.c
> > > new file mode 100644
> > > index 000000000000..c5ac2b5d9148
> > > --- /dev/null
> > > +++ b/arch/riscv/kernel/ffi.c

> > > +void __init ffi_init(void)
> > > +{
> > > +     ffi_acpi_root_pointer();
> >
> > What happens if, on a system with "normal" ACPI support, ffi_init() is
> > called & ffi_acpi_root_pointer() calls things like fdt_path_offset()?
> 
> According to the current logic, get it from FFI is enabled, if can
> not,  continue to use “normal” ACPI.

I find it hard to understand what you mean here. Do you mean something
like "The calls to fdt_path_offset() will use the mini EFI DT and are
harmless. If the config table is not present, it will continue to use
\"normal\" ACPI."?

> > > +}
> > > diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
> > > index 971fe776e2f8..5a933d6b6acb 100644
> > > --- a/arch/riscv/kernel/setup.c
> > > +++ b/arch/riscv/kernel/setup.c
> > > @@ -36,6 +36,7 @@
> > >  #include <asm/thread_info.h>
> > >  #include <asm/kasan.h>
> > >  #include <asm/efi.h>
> > > +#include <asm/ffi.h>
> > >
> > >  #include "head.h"
> > >
> > > @@ -279,6 +280,7 @@ void __init setup_arch(char **cmdline_p)
> > >       parse_early_param();
> > >
> > >       efi_init();
> > > +     ffi_init();
> >
> > What provides ffi_init() if CONFIG_FFI is disabled?

> Ok， Modified on v3,  put it with the CONFIG_FFI

Sorry, what does this mean?

> 
> >
> > >       paging_init();
> > >
> > >       /* Parse the ACPI tables for possible boot-time configuration */

Cheers,
Conor.
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20230703/a20fb0b6/attachment.sig>