[PATCH 11/24] RISC-V: ACPI: irqchip/riscv-intc: Add ACPI support

[Jessica Clarke]

On 30 Jan 2023, at 18:22, Sunil V L <sunilvl at ventanamicro.com> wrote:
> 
> Add support for initializing the RISC-V INTC driver on ACPI based
> platforms.
> 
> Signed-off-by: Sunil V L <sunilvl at ventanamicro.com>
> ---
> drivers/irqchip/irq-riscv-intc.c | 79 +++++++++++++++++++++++++++-----
> 1 file changed, 67 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/irqchip/irq-riscv-intc.c b/drivers/irqchip/irq-riscv-intc.c
> index f229e3e66387..044ec92fcba7 100644
> --- a/drivers/irqchip/irq-riscv-intc.c
> +++ b/drivers/irqchip/irq-riscv-intc.c
> @@ -6,6 +6,7 @@
>  */
> 
> #define pr_fmt(fmt) "riscv-intc: " fmt
> +#include <linux/acpi.h>
> #include <linux/atomic.h>
> #include <linux/bits.h>
> #include <linux/cpu.h>
> @@ -112,6 +113,30 @@ static struct fwnode_handle *riscv_intc_hwnode(void)
> 	return intc_domain->fwnode;
> }
> 
> +static int __init riscv_intc_init_common(struct fwnode_handle *fn)
> +{
> +	int rc;
> +
> +	intc_domain = irq_domain_create_linear(fn, BITS_PER_LONG,
> +					       &riscv_intc_domain_ops, NULL);
> +	if (!intc_domain) {
> +		pr_err("unable to add IRQ domain\n");
> +		return -ENXIO;
> +	}
> +
> +	rc = set_handle_irq(&riscv_intc_irq);
> +	if (rc) {
> +		pr_err("failed to set irq handler\n");
> +		return rc;
> +	}
> +
> +	riscv_set_intc_hwnode_fn(riscv_intc_hwnode);
> +
> +	pr_info("%d local interrupts mapped\n", BITS_PER_LONG);
> +
> +	return 0;
> +}
> +
> static int __init riscv_intc_init(struct device_node *node,
> 				  struct device_node *parent)
> {
> @@ -133,24 +158,54 @@ static int __init riscv_intc_init(struct device_node *node,
> 	if (riscv_hartid_to_cpuid(hartid) != smp_processor_id())
> 		return 0;
> 
> -	intc_domain = irq_domain_add_linear(node, BITS_PER_LONG,
> -					    &riscv_intc_domain_ops, NULL);
> -	if (!intc_domain) {
> -		pr_err("unable to add IRQ domain\n");
> -		return -ENXIO;
> -	}
> -
> -	rc = set_handle_irq(&riscv_intc_irq);
> +	rc = riscv_intc_init_common(of_node_to_fwnode(node));
> 	if (rc) {
> -		pr_err("failed to set irq handler\n");
> +		pr_err("failed to initialize INTC\n");
> 		return rc;
> 	}
> 
> -	riscv_set_intc_hwnode_fn(riscv_intc_hwnode);
> +	return 0;
> +}
> 
> -	pr_info("%d local interrupts mapped\n", BITS_PER_LONG);
> +IRQCHIP_DECLARE(riscv, "riscv,cpu-intc", riscv_intc_init);
> +
> +#ifdef CONFIG_ACPI
> +
> +static int __init
> +riscv_intc_acpi_init(union acpi_subtable_headers *header,
> +		     const unsigned long end)
> +{
> +	int rc;
> +	struct fwnode_handle *fn;
> +	struct acpi_madt_rintc *rintc;
> +
> +	rintc = (struct acpi_madt_rintc *)header;
> +
> +	/*
> +	 * The ACPI MADT will have one INTC for each CPU (or HART)
> +	 * so riscv_intc_acpi_init() function will be called once
> +	 * for each INTC. We only need to do INTC initialization
> +	 * for the INTC belonging to the boot CPU (or boot HART).
> +	 */
> +	if (riscv_hartid_to_cpuid(rintc->hart_id) != smp_processor_id())
> +		return 0;

Why are we carrying forward this mess to ACPI? The DT bindings are
awful and a complete pain to deal with, as evidenced by how both Linux
and FreeBSD have to go out of their way to do special things to only
look at one of the many copies of the same thing.

Jess

> +
> +	fn = irq_domain_alloc_named_fwnode("RISCV-INTC");
> +	WARN_ON(fn == NULL);
> +	if (!fn) {
> +		pr_err("unable to allocate INTC FW node\n");
> +		return -1;
> +	}
> +
> +	rc = riscv_intc_init_common(fn);
> +	if (rc) {
> +		pr_err("failed to initialize INTC\n");
> +		return rc;
> +	}
> 
> 	return 0;
> }
> 
> -IRQCHIP_DECLARE(riscv, "riscv,cpu-intc", riscv_intc_init);
> +IRQCHIP_ACPI_DECLARE(riscv_intc, ACPI_MADT_TYPE_RINTC,
> +		     NULL, 1, riscv_intc_acpi_init);
> +#endif
> -- 
> 2.38.0
> 
> 
> _______________________________________________
> linux-riscv mailing list
> linux-riscv at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv