[PATCH v6 07/13] riscv/kprobe: Prepare detour buffer for optimized kprobe
Chen Guokai
chenguokai17 at mails.ucas.ac.cn
Fri Jan 27 05:05:35 PST 2023
From: Liao Chang <liaochang1 at huawei.com>
To avoid messing up the execution context calling optprobe handler, it
needs to save and restore GPR/CSR context in the detour buffer.
The payload of detour buffer for different optprobe have some
differences, which derive from these reasons:
- 'CALL optimized_callback', the relative offset for 'call'
instruction is different for each detour buffer.
- 'EXECUTE INSN OUT-OF-LINE'.
- 'RETURN BACK', the chosen free register is reused here as the
destination register of jumping back.
So it also needs to customize the payload for each optimized kprobe.
Signed-off-by: Liao Chang <liaochang1 at huawei.com>
Co-developed-by: Chen Guokai <chenguokai17 at mails.ucas.ac.cn>
Signed-off-by: Chen Guokai <chenguokai17 at mails.ucas.ac.cn>
---
arch/riscv/include/asm/kprobes.h | 16 +++
arch/riscv/kernel/probes/opt.c | 71 ++++++++++++
arch/riscv/kernel/probes/opt_trampoline.S | 125 ++++++++++++++++++++++
3 files changed, 212 insertions(+)
diff --git a/arch/riscv/include/asm/kprobes.h b/arch/riscv/include/asm/kprobes.h
index 96cd36e67e2e..75ebd02be171 100644
--- a/arch/riscv/include/asm/kprobes.h
+++ b/arch/riscv/include/asm/kprobes.h
@@ -46,10 +46,26 @@ bool kprobe_single_step_handler(struct pt_regs *regs);
/* optinsn template addresses */
extern __visible kprobe_opcode_t optprobe_template_entry[];
extern __visible kprobe_opcode_t optprobe_template_end[];
+extern __visible kprobe_opcode_t optprobe_template_save[];
+extern __visible kprobe_opcode_t optprobe_template_call[];
+extern __visible kprobe_opcode_t optprobe_template_insn[];
+extern __visible kprobe_opcode_t optprobe_template_return[];
#define MAX_OPTINSN_SIZE \
((unsigned long)optprobe_template_end - \
(unsigned long)optprobe_template_entry)
+#define DETOUR_SAVE_OFFSET \
+ ((unsigned long)optprobe_template_save - \
+ (unsigned long)optprobe_template_entry)
+#define DETOUR_CALL_OFFSET \
+ ((unsigned long)optprobe_template_call - \
+ (unsigned long)optprobe_template_entry)
+#define DETOUR_INSN_OFFSET \
+ ((unsigned long)optprobe_template_insn - \
+ (unsigned long)optprobe_template_entry)
+#define DETOUR_RETURN_OFFSET \
+ ((unsigned long)optprobe_template_return - \
+ (unsigned long)optprobe_template_entry)
/*
* For RVI and RVC hybrid encoding kernel, although long jump just needs
diff --git a/arch/riscv/kernel/probes/opt.c b/arch/riscv/kernel/probes/opt.c
index d84aa1420fa2..a47f7d2bf3a6 100644
--- a/arch/riscv/kernel/probes/opt.c
+++ b/arch/riscv/kernel/probes/opt.c
@@ -11,9 +11,32 @@
#include <linux/kprobes.h>
#include <asm/kprobes.h>
#include <asm/patch.h>
+#include <asm/asm-offsets.h>
#include "simulate-insn.h"
#include "decode-insn.h"
+#include "../../net/bpf_jit.h"
+
+static void optimized_callback(struct optimized_kprobe *op,
+ struct pt_regs *regs)
+{
+ if (kprobe_disabled(&op->kp))
+ return;
+
+ preempt_disable();
+ if (kprobe_running()) {
+ kprobes_inc_nmissed_count(&op->kp);
+ } else {
+ __this_cpu_write(current_kprobe, &op->kp);
+ /* Save skipped registers */
+ instruction_pointer_set(regs, (unsigned long)op->kp.addr);
+ get_kprobe_ctlblk()->kprobe_status = KPROBE_HIT_ACTIVE;
+ opt_pre_handler(&op->kp, regs);
+ __this_cpu_write(current_kprobe, NULL);
+ }
+ preempt_enable();
+}
+NOKPROBE_SYMBOL(optimized_callback)
static int in_auipc_jalr_range(long val)
{
@@ -30,6 +53,11 @@ static int in_auipc_jalr_range(long val)
#endif
}
+#define DETOUR_ADDR(code, offs) \
+ ((void *)((unsigned long)(code) + (offs)))
+#define DETOUR_INSN(code, offs) \
+ (*(kprobe_opcode_t *)((unsigned long)(code) + (offs)))
+
/*
* Copy optprobe assembly code template into detour buffer and modify some
* instructions for each kprobe.
@@ -38,6 +66,49 @@ static void prepare_detour_buffer(kprobe_opcode_t *code, kprobe_opcode_t *slot,
int rd, struct optimized_kprobe *op,
kprobe_opcode_t opcode)
{
+ long offs;
+ unsigned long data;
+
+ memcpy(code, optprobe_template_entry, MAX_OPTINSN_SIZE);
+
+ /* Step1: record optimized_kprobe pointer into detour buffer */
+ memcpy(DETOUR_ADDR(code, DETOUR_SAVE_OFFSET), &op, sizeof(op));
+
+ /*
+ * Step2
+ * auipc ra, 0 --> aupic ra, HI20.{optimized_callback - pc}
+ * jalr ra, 0(ra) --> jalr ra, LO12.{optimized_callback - pc}(ra)
+ */
+ offs = (unsigned long)&optimized_callback -
+ (unsigned long)DETOUR_ADDR(slot, DETOUR_CALL_OFFSET);
+ DETOUR_INSN(code, DETOUR_CALL_OFFSET) =
+ rv_auipc(1, (offs + (1 << 11)) >> 12);
+ DETOUR_INSN(code, DETOUR_CALL_OFFSET + 0x4) =
+ rv_jalr(1, 1, offs & 0xFFF);
+
+ /* Step3: copy replaced instructions into detour buffer */
+ memcpy(DETOUR_ADDR(code, DETOUR_INSN_OFFSET), op->kp.addr,
+ op->optinsn.length);
+ memcpy(DETOUR_ADDR(code, DETOUR_INSN_OFFSET), &opcode,
+ GET_INSN_LENGTH(opcode));
+
+ /* Step4: record return address of long jump into detour buffer */
+ data = (unsigned long)op->kp.addr + op->optinsn.length;
+ memcpy(DETOUR_ADDR(code, DETOUR_RETURN_OFFSET), &data, sizeof(data));
+
+ /*
+ * Step5
+ * auipc ra, 0 --> auipc rd, 0
+ * ld/w ra, -4(ra) --> ld/w rd, -8(rd)
+ * jalr x0, 0(ra) --> jalr x0, 0(rd)
+ */
+ DETOUR_INSN(code, DETOUR_RETURN_OFFSET + 0x8) = rv_auipc(rd, 0);
+#if __riscv_xlen == 32
+ DETOUR_INSN(code, DETOUR_RETURN_OFFSET + 0xC) = rv_lw(rd, -8, rd);
+#else
+ DETOUR_INSN(code, DETOUR_RETURN_OFFSET + 0xC) = rv_ld(rd, -8, rd);
+#endif
+ DETOUR_INSN(code, DETOUR_RETURN_OFFSET + 0x10) = rv_jalr(0, rd, 0);
}
/* Registers the first usage of which is the destination of instruction */
diff --git a/arch/riscv/kernel/probes/opt_trampoline.S b/arch/riscv/kernel/probes/opt_trampoline.S
index 16160c4367ff..5187e71d8e61 100644
--- a/arch/riscv/kernel/probes/opt_trampoline.S
+++ b/arch/riscv/kernel/probes/opt_trampoline.S
@@ -1,12 +1,137 @@
/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2022 Guokai Chen
+ * Copyright (C) 2022 Liao, Chang <liaochang1 at huawei.com>
*/
#include <linux/linkage.h>
+#include <asm/asm.h>
#incldue <asm/csr.h>
#include <asm/asm-offsets.h>
SYM_ENTRY(optprobe_template_entry, SYM_L_GLOBAL, SYM_A_NONE)
+ addi sp, sp, -(PT_SIZE_ON_STACK)
+ REG_S x1, PT_RA(sp)
+ REG_S x2, PT_SP(sp)
+ REG_S x3, PT_GP(sp)
+ REG_S x4, PT_TP(sp)
+ REG_S x5, PT_T0(sp)
+ REG_S x6, PT_T1(sp)
+ REG_S x7, PT_T2(sp)
+ REG_S x8, PT_S0(sp)
+ REG_S x9, PT_S1(sp)
+ REG_S x10, PT_A0(sp)
+ REG_S x11, PT_A1(sp)
+ REG_S x12, PT_A2(sp)
+ REG_S x13, PT_A3(sp)
+ REG_S x14, PT_A4(sp)
+ REG_S x15, PT_A5(sp)
+ REG_S x16, PT_A6(sp)
+ REG_S x17, PT_A7(sp)
+ REG_S x18, PT_S2(sp)
+ REG_S x19, PT_S3(sp)
+ REG_S x20, PT_S4(sp)
+ REG_S x21, PT_S5(sp)
+ REG_S x22, PT_S6(sp)
+ REG_S x23, PT_S7(sp)
+ REG_S x24, PT_S8(sp)
+ REG_S x25, PT_S9(sp)
+ REG_S x26, PT_S10(sp)
+ REG_S x27, PT_S11(sp)
+ REG_S x28, PT_T3(sp)
+ REG_S x29, PT_T4(sp)
+ REG_S x30, PT_T5(sp)
+ REG_S x31, PT_T6(sp)
+ /* Update fp is friendly for stacktrace */
+ addi s0, sp, (PT_SIZE_ON_STACK)
+ j 1f
+
+SYM_ENTRY(optprobe_template_save, SYM_L_GLOBAL, SYM_A_NONE)
+ /*
+ * Step1:
+ * Filled with the pointer to optimized_kprobe data
+ */
+ .dword 0
+1:
+ /* Load optimize_kprobe pointer from .dword below */
+ auipc a0, 0
+ REG_L a0, -8(a0)
+ add a1, sp, x0
+
+SYM_ENTRY(optprobe_template_call, SYM_L_GLOBAL, SYM_A_NONE)
+ /*
+ * Step2:
+ * <IMME> of AUIPC/JALR are modified to the offset to optimized_callback
+ * jump target is loaded from above .dword.
+ */
+ auipc ra, 0
+ jalr ra, 0(ra)
+
+ REG_L x1, PT_RA(sp)
+ REG_L x3, PT_GP(sp)
+ REG_L x4, PT_TP(sp)
+ REG_L x5, PT_T0(sp)
+ REG_L x6, PT_T1(sp)
+ REG_L x7, PT_T2(sp)
+ REG_L x8, PT_S0(sp)
+ REG_L x9, PT_S1(sp)
+ REG_L x10, PT_A0(sp)
+ REG_L x11, PT_A1(sp)
+ REG_L x12, PT_A2(sp)
+ REG_L x13, PT_A3(sp)
+ REG_L x14, PT_A4(sp)
+ REG_L x15, PT_A5(sp)
+ REG_L x16, PT_A6(sp)
+ REG_L x17, PT_A7(sp)
+ REG_L x18, PT_S2(sp)
+ REG_L x19, PT_S3(sp)
+ REG_L x20, PT_S4(sp)
+ REG_L x21, PT_S5(sp)
+ REG_L x22, PT_S6(sp)
+ REG_L x23, PT_S7(sp)
+ REG_L x24, PT_S8(sp)
+ REG_L x25, PT_S9(sp)
+ REG_L x26, PT_S10(sp)
+ REG_L x27, PT_S11(sp)
+ REG_L x28, PT_T3(sp)
+ REG_L x29, PT_T4(sp)
+ REG_L x30, PT_T5(sp)
+ REG_L x31, PT_T6(sp)
+ REG_L x2, PT_SP(sp)
+ addi sp, sp, (PT_SIZE_ON_STACK)
+
+SYM_ENTRY(optprobe_template_insn, SYM_L_GLOBAL, SYM_A_NONE)
+ /*
+ * Step3:
+ * NOPS will be replaced by the probed instruction, at worst case 3 RVC
+ * and 1 RVI instructions is about to execute out of line.
+ */
+#ifdef CONFIG_RISCV_ISA_C
+ c.addi zero, 0
+ c.addi zero, 0
+ c.addi zero, 0
+ c.addi zero, 0
+ c.addi zero, 0
+#else
+ addi zero, zero, 0
+ addi zero, zero, 0
+#endif
+ j 2f
+
+SYM_ENTRY(optprobe_template_return, SYM_L_GLOBAL, SYM_A_NONE)
+ /*
+ * Step4:
+ * Filled with the return address of long jump(AUIPC/JALR)
+ */
+ .dword 0
+2:
+ /*
+ * Step5:
+ * The <RA> of AUIPC/LD/JALR will be replaced for each kprobe,
+ * used to read return address saved in .dword above.
+ */
+ auipc ra, 0
+ REG_L ra, -8(ra)
+ jalr x0, 0(ra)
SYM_ENTRY(optprobe_template_end, SYM_L_GLOBAL, SYM_A_NONE)
--
2.34.1
More information about the linux-riscv
mailing list