[PATCH v3 09/51] cpuidle,omap3: Push RCU-idle into driver
Peter Zijlstra
peterz at infradead.org
Thu Jan 12 11:43:23 PST 2023
Doing RCU-idle outside the driver, only to then teporarily enable it
again before going idle is daft.
Notably the cpu_pm_*() calls implicitly re-enable RCU for a bit.
Signed-off-by: Peter Zijlstra (Intel) <peterz at infradead.org>
Reviewed-by: Frederic Weisbecker <frederic at kernel.org>
Reviewed-by: Tony Lindgren <tony at atomide.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki at intel.com>
Tested-by: Tony Lindgren <tony at atomide.com>
Tested-by: Ulf Hansson <ulf.hansson at linaro.org>
---
arch/arm/mach-omap2/cpuidle34xx.c | 16 ++++++++++++++++
1 file changed, 16 insertions(+)
--- a/arch/arm/mach-omap2/cpuidle34xx.c
+++ b/arch/arm/mach-omap2/cpuidle34xx.c
@@ -133,7 +133,9 @@ static int omap3_enter_idle(struct cpuid
}
/* Execute ARM wfi */
+ ct_idle_enter();
omap_sram_idle();
+ ct_idle_exit();
/*
* Call idle CPU PM enter notifier chain to restore
@@ -265,6 +267,7 @@ static struct cpuidle_driver omap3_idle_
.owner = THIS_MODULE,
.states = {
{
+ .flags = CPUIDLE_FLAG_RCU_IDLE,
.enter = omap3_enter_idle_bm,
.exit_latency = 2 + 2,
.target_residency = 5,
@@ -272,6 +275,7 @@ static struct cpuidle_driver omap3_idle_
.desc = "MPU ON + CORE ON",
},
{
+ .flags = CPUIDLE_FLAG_RCU_IDLE,
.enter = omap3_enter_idle_bm,
.exit_latency = 10 + 10,
.target_residency = 30,
@@ -279,6 +283,7 @@ static struct cpuidle_driver omap3_idle_
.desc = "MPU ON + CORE ON",
},
{
+ .flags = CPUIDLE_FLAG_RCU_IDLE,
.enter = omap3_enter_idle_bm,
.exit_latency = 50 + 50,
.target_residency = 300,
@@ -286,6 +291,7 @@ static struct cpuidle_driver omap3_idle_
.desc = "MPU RET + CORE ON",
},
{
+ .flags = CPUIDLE_FLAG_RCU_IDLE,
.enter = omap3_enter_idle_bm,
.exit_latency = 1500 + 1800,
.target_residency = 4000,
@@ -293,6 +299,7 @@ static struct cpuidle_driver omap3_idle_
.desc = "MPU OFF + CORE ON",
},
{
+ .flags = CPUIDLE_FLAG_RCU_IDLE,
.enter = omap3_enter_idle_bm,
.exit_latency = 2500 + 7500,
.target_residency = 12000,
@@ -300,6 +307,7 @@ static struct cpuidle_driver omap3_idle_
.desc = "MPU RET + CORE RET",
},
{
+ .flags = CPUIDLE_FLAG_RCU_IDLE,
.enter = omap3_enter_idle_bm,
.exit_latency = 3000 + 8500,
.target_residency = 15000,
@@ -307,6 +315,7 @@ static struct cpuidle_driver omap3_idle_
.desc = "MPU OFF + CORE RET",
},
{
+ .flags = CPUIDLE_FLAG_RCU_IDLE,
.enter = omap3_enter_idle_bm,
.exit_latency = 10000 + 30000,
.target_residency = 30000,
@@ -328,6 +337,7 @@ static struct cpuidle_driver omap3430_id
.owner = THIS_MODULE,
.states = {
{
+ .flags = CPUIDLE_FLAG_RCU_IDLE,
.enter = omap3_enter_idle_bm,
.exit_latency = 110 + 162,
.target_residency = 5,
@@ -335,6 +345,7 @@ static struct cpuidle_driver omap3430_id
.desc = "MPU ON + CORE ON",
},
{
+ .flags = CPUIDLE_FLAG_RCU_IDLE,
.enter = omap3_enter_idle_bm,
.exit_latency = 106 + 180,
.target_residency = 309,
@@ -342,6 +353,7 @@ static struct cpuidle_driver omap3430_id
.desc = "MPU ON + CORE ON",
},
{
+ .flags = CPUIDLE_FLAG_RCU_IDLE,
.enter = omap3_enter_idle_bm,
.exit_latency = 107 + 410,
.target_residency = 46057,
@@ -349,6 +361,7 @@ static struct cpuidle_driver omap3430_id
.desc = "MPU RET + CORE ON",
},
{
+ .flags = CPUIDLE_FLAG_RCU_IDLE,
.enter = omap3_enter_idle_bm,
.exit_latency = 121 + 3374,
.target_residency = 46057,
@@ -356,6 +369,7 @@ static struct cpuidle_driver omap3430_id
.desc = "MPU OFF + CORE ON",
},
{
+ .flags = CPUIDLE_FLAG_RCU_IDLE,
.enter = omap3_enter_idle_bm,
.exit_latency = 855 + 1146,
.target_residency = 46057,
@@ -363,6 +377,7 @@ static struct cpuidle_driver omap3430_id
.desc = "MPU RET + CORE RET",
},
{
+ .flags = CPUIDLE_FLAG_RCU_IDLE,
.enter = omap3_enter_idle_bm,
.exit_latency = 7580 + 4134,
.target_residency = 484329,
@@ -370,6 +385,7 @@ static struct cpuidle_driver omap3430_id
.desc = "MPU OFF + CORE RET",
},
{
+ .flags = CPUIDLE_FLAG_RCU_IDLE,
.enter = omap3_enter_idle_bm,
.exit_latency = 7505 + 15274,
.target_residency = 484329,
More information about the linux-riscv
mailing list