[PATCH v3 7/7] riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device tree

[Conor Dooley]

On Tue, Dec 20, 2022 at 09:12:47AM +0800, Hal Feng wrote:

> +	aliases {
> +		serial0 = &uart0;
> +	};
> +
> +	chosen {
> +		stdout-path = "serial0:115200n8";
> +	};

So I think this is wrong, and the stdout-path should be uart3 instead.
Per the QSG [0], GPIO5/6 are the suggested UART Tx/Rx to use.
This appears to map to uart3 rather than uart0.
FWIW, uart3 is also the stdout-path for the v1, see:
arch/riscv/boot/dts/starfive/jh7100-common.dtsi

At least, that change is what I needed to do in order to use the
JH7110_VisionFive2_upstream branch, AFAICT matches what you've got in
this series.

Thanks,
Conor.

0 - https://doc-en.rvspace.org/VisionFive2/PDF/VisionFive2_QSG.pdf
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20230110/e0ada892/attachment.sig>