[bpf-next v1] bpf: drop deprecated bpf_jit_enable == 2

Tonghao Zhang xxmy at infragraf.org
Tue Jan 3 17:54:59 PST 2023



在 2023/1/3 下午11:42,“Daniel Borkmann”<daniel at iogearbox.net> 写入:

    On 1/3/23 2:24 PM, xxmy at infragraf.org wrote:
    > From: Tonghao Zhang <xxmy at infragraf.org>
    > 
    > The x86_64 can't dump the valid insn in this way. A test BPF prog
    > which include subprog:
    > 
    > $ llvm-objdump -d subprog.o
    > Disassembly of section .text:
    > 0000000000000000 <subprog>:
    >         0:	18 01 00 00 73 75 62 70 00 00 00 00 72 6f 67 00	r1 = 29114459903653235 ll
    >         2:	7b 1a f8 ff 00 00 00 00	*(u64 *)(r10 - 8) = r1
    >         3:	bf a1 00 00 00 00 00 00	r1 = r10
    >         4:	07 01 00 00 f8 ff ff ff	r1 += -8
    >         5:	b7 02 00 00 08 00 00 00	r2 = 8
    >         6:	85 00 00 00 06 00 00 00	call 6
    >         7:	95 00 00 00 00 00 00 00	exit
    > Disassembly of section raw_tp/sys_enter:
    > 0000000000000000 <entry>:
    >         0:	85 10 00 00 ff ff ff ff	call -1
    >         1:	b7 00 00 00 00 00 00 00	r0 = 0
    >         2:	95 00 00 00 00 00 00 00	exit
    > 
    > kernel print message:
    > [  580.775387] flen=8 proglen=51 pass=3 image=ffffffffa000c20c from=kprobe-load pid=1643
    > [  580.777236] JIT code: 00000000: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc
    > [  580.779037] JIT code: 00000010: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc
    > [  580.780767] JIT code: 00000020: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc
    > [  580.782568] JIT code: 00000030: cc cc cc
    > 
    > $ bpf_jit_disasm
    > 51 bytes emitted from JIT compiler (pass:3, flen:8)
    > ffffffffa000c20c + <x>:
    >     0:	int3
    >     1:	int3
    >     2:	int3
    >     3:	int3
    >     4:	int3
    >     5:	int3
    >     ...
    > 
    > Until bpf_jit_binary_pack_finalize is invoked, we copy rw_header to header
    > and then image/insn is valid. BTW, we can use the "bpftool prog dump" JITed instructions.
    > 
    > * clean up the doc
    > * remove bpf_jit_disasm tool
    > * set bpf_jit_enable only 0 or 1.
    > 
    > Signed-off-by: Tonghao Zhang <xxmy at infragraf.org>
    > Suggested-by: Alexei Starovoitov <ast at kernel.org>
    > Cc: Alexei Starovoitov <ast at kernel.org>
    > Cc: Daniel Borkmann <daniel at iogearbox.net>
    > Cc: Andrii Nakryiko <andrii at kernel.org>
    > Cc: Martin KaFai Lau <martin.lau at linux.dev>
    > Cc: Song Liu <song at kernel.org>
    > Cc: Yonghong Song <yhs at fb.com>
    > Cc: John Fastabend <john.fastabend at gmail.com>
    > Cc: KP Singh <kpsingh at kernel.org>
    > Cc: Stanislav Fomichev <sdf at google.com>
    > Cc: Hao Luo <haoluo at google.com>
    > Cc: Jiri Olsa <jolsa at kernel.org>
    > Cc: Hou Tao <houtao1 at huawei.com>
    > ---
    >   Documentation/admin-guide/sysctl/net.rst |   2 +-
    >   Documentation/networking/filter.rst      |  98 +------
    >   arch/arm/net/bpf_jit_32.c                |   4 -
    >   arch/arm64/net/bpf_jit_comp.c            |   4 -
    >   arch/loongarch/net/bpf_jit.c             |   4 -
    >   arch/mips/net/bpf_jit_comp.c             |   3 -
    >   arch/powerpc/net/bpf_jit_comp.c          |  11 -
    >   arch/riscv/net/bpf_jit_core.c            |   3 -
    >   arch/s390/net/bpf_jit_comp.c             |   4 -
    >   arch/sparc/net/bpf_jit_comp_32.c         |   3 -
    >   arch/sparc/net/bpf_jit_comp_64.c         |  13 -
    >   arch/x86/net/bpf_jit_comp.c              |   3 -
    >   arch/x86/net/bpf_jit_comp32.c            |   3 -
    >   net/core/sysctl_net_core.c               |  14 +-
    >   tools/bpf/.gitignore                     |   1 -
    >   tools/bpf/Makefile                       |  10 +-
    >   tools/bpf/bpf_jit_disasm.c               | 332 -----------------------
    >   17 files changed, 8 insertions(+), 504 deletions(-)
    >   delete mode 100644 tools/bpf/bpf_jit_disasm.c
    > 
    > diff --git a/Documentation/admin-guide/sysctl/net.rst b/Documentation/admin-guide/sysctl/net.rst
    > index 6394f5dc2303..45d3d965276c 100644
    > --- a/Documentation/admin-guide/sysctl/net.rst
    > +++ b/Documentation/admin-guide/sysctl/net.rst
    > @@ -87,7 +87,7 @@ Values:
    >   
    >   	- 0 - disable the JIT (default value)
    >   	- 1 - enable the JIT
    > -	- 2 - enable the JIT and ask the compiler to emit traces on kernel log.
    > +	- 2 - deprecated in linux 6.2

    I'd make it more clear in the docs and reword it as follows (also, it'll be in 6.3, not 6.2):

    	- 2 - enable the JIT and ask the compiler to emit traces on kernel log.
    	      (deprecated since v6.3, use ``bpftool prog dump jited id <id>`` instead)

    >   
    >   bpf_jit_harden
    >   --------------
    [...]
    > diff --git a/net/core/sysctl_net_core.c b/net/core/sysctl_net_core.c
    > index 5b1ce656baa1..731a2eb0f68e 100644
    > --- a/net/core/sysctl_net_core.c
    > +++ b/net/core/sysctl_net_core.c
    > @@ -275,16 +275,8 @@ static int proc_dointvec_minmax_bpf_enable(struct ctl_table *table, int write,
    >   
    >   	tmp.data = &jit_enable;
    >   	ret = proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos);
    > -	if (write && !ret) {
    > -		if (jit_enable < 2 ||
    > -		    (jit_enable == 2 && bpf_dump_raw_ok(current_cred()))) {
    > -			*(int *)table->data = jit_enable;
    > -			if (jit_enable == 2)
    > -				pr_warn("bpf_jit_enable = 2 was set! NEVER use this in production, only for JIT debugging!\n");
    > -		} else {
    > -			ret = -EPERM;
    > -		}
    > -	}
    > +	if (write && !ret)
    > +		*(int *)table->data = jit_enable;
    >   
    >   	if (write && ret && min == max)
    >   		pr_info_once("CONFIG_BPF_JIT_ALWAYS_ON is enabled, bpf_jit_enable is permanently set to 1.\n");
    > @@ -395,7 +387,7 @@ static struct ctl_table net_core_table[] = {
    >   		.extra2		= SYSCTL_ONE,
    >   # else
    >   		.extra1		= SYSCTL_ZERO,
    > -		.extra2		= SYSCTL_TWO,
    > +		.extra2		= SYSCTL_ONE,

    I'd leave it at SYSCTL_TWO to avoid breakage, just that the semantics of 2 will be the same
    as 1 going forward.
Thanks Daniel, v2 will fix that.
    >   # endif
    >   	},
    >   # ifdef CONFIG_HAVE_EBPF_JIT






More information about the linux-riscv mailing list