[RFC v5.1 9/9] [DON'T APPLY] cache: sifive-ccache: add cache flushing capability
Palmer Dabbelt
palmer at dabbelt.com
Tue Jan 3 13:25:36 PST 2023
On Tue, 03 Jan 2023 13:04:01 PST (-0800), Conor Dooley wrote:
> From: Daire McNamara <daire.mcnamara at microchip.com>
>
> SiFive L2 cache controller can flush L2 cache. Expose this capability via
Do you have a pointer to the datasheet for whatever L2 controller is in
the PFSOC? IIRC whether it's possible to correctly flush the cache is
kind of subtle, as it depends on what else is floating around the SOC.
> driver.
>
> Signed-off-by: Daire McNamara <daire.mcnamara at microchip.com>
> [Conor: rebase on top of move to cache subsystem]
> Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
> ---
> This commit needs more work, and a way to enable it from errata. I've
> not gone and done this as PolarFire SoC has archid etc all set to zero.
> So we need to go figure out a workaround for this, before adding in
> errata enabling code for this. I've included it here as a second user of
> the cache management stuff, since what's currently upstream for the
> ccache driver does not do any cache management.
> ---
> drivers/cache/sifive_ccache.c | 45 +++++++++++++++++++++++++++++++++++
> 1 file changed, 45 insertions(+)
>
> diff --git a/drivers/cache/sifive_ccache.c b/drivers/cache/sifive_ccache.c
> index 47e7d6557f85..3c00f205bace 100644
> --- a/drivers/cache/sifive_ccache.c
> +++ b/drivers/cache/sifive_ccache.c
> @@ -9,12 +9,14 @@
> #define pr_fmt(fmt) "CCACHE: " fmt
>
> #include <linux/debugfs.h>
> +#include <linux/dma-direction.h>
> #include <linux/interrupt.h>
> #include <linux/of_irq.h>
> #include <linux/of_address.h>
> #include <linux/device.h>
> #include <linux/bitfield.h>
> #include <asm/cacheinfo.h>
> +#include <asm/cacheflush.h>
> #include <cache/sifive_ccache.h>
>
> #define SIFIVE_CCACHE_DIRECCFIX_LOW 0x100
> @@ -42,11 +44,15 @@
> #define SIFIVE_CCACHE_WAYENABLE 0x08
> #define SIFIVE_CCACHE_ECCINJECTERR 0x40
>
> +#define SIFIVE_CCACHE_FLUSH64 0x200
> +#define SIFIVE_CCACHE_FLUSH32 0x240
> +
> #define SIFIVE_CCACHE_MAX_ECCINTR 4
>
> static void __iomem *ccache_base;
> static int g_irq[SIFIVE_CCACHE_MAX_ECCINTR];
> static struct riscv_cacheinfo_ops ccache_cache_ops;
> +static struct riscv_cache_maint_ops ccache_cmos;
> static int level;
>
> enum {
> @@ -205,6 +211,42 @@ static irqreturn_t ccache_int_handler(int irq, void *device)
> return IRQ_HANDLED;
> }
>
> +static void sifive_ccache_dma_wback_inv(void* vaddr, unsigned long size)
> +{
> + void * __iomem flush = ccache_base + SIFIVE_CCACHE_FLUSH64;
> + phys_addr_t start = virt_to_phys(vaddr);
> + phys_addr_t aligned_start = start & ~0x3f;
> + u64 addr;
> + u64 end;
> + u64 aligned_end;
> +
> + size += start - aligned_start;
> + end = start + size;
> + aligned_end = end += 0x3f;
> + aligned_end &= ~0x3f;
> +
> + for (addr = aligned_start; addr < aligned_end; addr += 64)
> + writeq(addr, flush);
> +}
> +
> +static void sifive_ccache_cmo(unsigned int cache_size, void *vaddr, size_t size,
> + int dir, int ops)
> +{
> + switch (dir) {
> + case DMA_TO_DEVICE:
> + sifive_ccache_dma_wback_inv(vaddr, size);
> + break;
> + case DMA_FROM_DEVICE:
> + sifive_ccache_dma_wback_inv(vaddr, size);
> + break;
> + case DMA_BIDIRECTIONAL:
> + sifive_ccache_dma_wback_inv(vaddr, size);
> + break;
> + default:
> + break;
> + }
> +}
> +
> static int __init sifive_ccache_init(void)
> {
> struct device_node *np;
> @@ -254,6 +296,9 @@ static int __init sifive_ccache_init(void)
> ccache_cache_ops.get_priv_group = ccache_get_priv_group;
> riscv_set_cacheinfo_ops(&ccache_cache_ops);
>
> + ccache_cmos.cmo_patchfunc = sifive_ccache_cmo;
> + riscv_set_cache_maint_ops(&ccache_cmos);
> +
> #ifdef CONFIG_DEBUG_FS
> setup_sifive_debug();
> #endif
More information about the linux-riscv
mailing list