[bpf-next v1] bpf: drop deprecated bpf_jit_enable == 2
xxmy at infragraf.org
xxmy at infragraf.org
Tue Jan 3 05:24:54 PST 2023
From: Tonghao Zhang <xxmy at infragraf.org>
The x86_64 can't dump the valid insn in this way. A test BPF prog
which include subprog:
$ llvm-objdump -d subprog.o
Disassembly of section .text:
0000000000000000 <subprog>:
0: 18 01 00 00 73 75 62 70 00 00 00 00 72 6f 67 00 r1 = 29114459903653235 ll
2: 7b 1a f8 ff 00 00 00 00 *(u64 *)(r10 - 8) = r1
3: bf a1 00 00 00 00 00 00 r1 = r10
4: 07 01 00 00 f8 ff ff ff r1 += -8
5: b7 02 00 00 08 00 00 00 r2 = 8
6: 85 00 00 00 06 00 00 00 call 6
7: 95 00 00 00 00 00 00 00 exit
Disassembly of section raw_tp/sys_enter:
0000000000000000 <entry>:
0: 85 10 00 00 ff ff ff ff call -1
1: b7 00 00 00 00 00 00 00 r0 = 0
2: 95 00 00 00 00 00 00 00 exit
kernel print message:
[ 580.775387] flen=8 proglen=51 pass=3 image=ffffffffa000c20c from=kprobe-load pid=1643
[ 580.777236] JIT code: 00000000: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc
[ 580.779037] JIT code: 00000010: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc
[ 580.780767] JIT code: 00000020: cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc
[ 580.782568] JIT code: 00000030: cc cc cc
$ bpf_jit_disasm
51 bytes emitted from JIT compiler (pass:3, flen:8)
ffffffffa000c20c + <x>:
0: int3
1: int3
2: int3
3: int3
4: int3
5: int3
...
Until bpf_jit_binary_pack_finalize is invoked, we copy rw_header to header
and then image/insn is valid. BTW, we can use the "bpftool prog dump" JITed instructions.
* clean up the doc
* remove bpf_jit_disasm tool
* set bpf_jit_enable only 0 or 1.
Signed-off-by: Tonghao Zhang <xxmy at infragraf.org>
Suggested-by: Alexei Starovoitov <ast at kernel.org>
Cc: Alexei Starovoitov <ast at kernel.org>
Cc: Daniel Borkmann <daniel at iogearbox.net>
Cc: Andrii Nakryiko <andrii at kernel.org>
Cc: Martin KaFai Lau <martin.lau at linux.dev>
Cc: Song Liu <song at kernel.org>
Cc: Yonghong Song <yhs at fb.com>
Cc: John Fastabend <john.fastabend at gmail.com>
Cc: KP Singh <kpsingh at kernel.org>
Cc: Stanislav Fomichev <sdf at google.com>
Cc: Hao Luo <haoluo at google.com>
Cc: Jiri Olsa <jolsa at kernel.org>
Cc: Hou Tao <houtao1 at huawei.com>
---
Documentation/admin-guide/sysctl/net.rst | 2 +-
Documentation/networking/filter.rst | 98 +------
arch/arm/net/bpf_jit_32.c | 4 -
arch/arm64/net/bpf_jit_comp.c | 4 -
arch/loongarch/net/bpf_jit.c | 4 -
arch/mips/net/bpf_jit_comp.c | 3 -
arch/powerpc/net/bpf_jit_comp.c | 11 -
arch/riscv/net/bpf_jit_core.c | 3 -
arch/s390/net/bpf_jit_comp.c | 4 -
arch/sparc/net/bpf_jit_comp_32.c | 3 -
arch/sparc/net/bpf_jit_comp_64.c | 13 -
arch/x86/net/bpf_jit_comp.c | 3 -
arch/x86/net/bpf_jit_comp32.c | 3 -
net/core/sysctl_net_core.c | 14 +-
tools/bpf/.gitignore | 1 -
tools/bpf/Makefile | 10 +-
tools/bpf/bpf_jit_disasm.c | 332 -----------------------
17 files changed, 8 insertions(+), 504 deletions(-)
delete mode 100644 tools/bpf/bpf_jit_disasm.c
diff --git a/Documentation/admin-guide/sysctl/net.rst b/Documentation/admin-guide/sysctl/net.rst
index 6394f5dc2303..45d3d965276c 100644
--- a/Documentation/admin-guide/sysctl/net.rst
+++ b/Documentation/admin-guide/sysctl/net.rst
@@ -87,7 +87,7 @@ Values:
- 0 - disable the JIT (default value)
- 1 - enable the JIT
- - 2 - enable the JIT and ask the compiler to emit traces on kernel log.
+ - 2 - deprecated in linux 6.2
bpf_jit_harden
--------------
diff --git a/Documentation/networking/filter.rst b/Documentation/networking/filter.rst
index f69da5074860..5f51c050e88f 100644
--- a/Documentation/networking/filter.rst
+++ b/Documentation/networking/filter.rst
@@ -520,102 +520,8 @@ been previously enabled by root::
echo 1 > /proc/sys/net/core/bpf_jit_enable
-For JIT developers, doing audits etc, each compile run can output the generated
-opcode image into the kernel log via::
-
- echo 2 > /proc/sys/net/core/bpf_jit_enable
-
-Example output from dmesg::
-
- [ 3389.935842] flen=6 proglen=70 pass=3 image=ffffffffa0069c8f
- [ 3389.935847] JIT code: 00000000: 55 48 89 e5 48 83 ec 60 48 89 5d f8 44 8b 4f 68
- [ 3389.935849] JIT code: 00000010: 44 2b 4f 6c 4c 8b 87 d8 00 00 00 be 0c 00 00 00
- [ 3389.935850] JIT code: 00000020: e8 1d 94 ff e0 3d 00 08 00 00 75 16 be 17 00 00
- [ 3389.935851] JIT code: 00000030: 00 e8 28 94 ff e0 83 f8 01 75 07 b8 ff ff 00 00
- [ 3389.935852] JIT code: 00000040: eb 02 31 c0 c9 c3
-
-When CONFIG_BPF_JIT_ALWAYS_ON is enabled, bpf_jit_enable is permanently set to 1 and
-setting any other value than that will return in failure. This is even the case for
-setting bpf_jit_enable to 2, since dumping the final JIT image into the kernel log
-is discouraged and introspection through bpftool (under tools/bpf/bpftool/) is the
-generally recommended approach instead.
-
-In the kernel source tree under tools/bpf/, there's bpf_jit_disasm for
-generating disassembly out of the kernel log's hexdump::
-
- # ./bpf_jit_disasm
- 70 bytes emitted from JIT compiler (pass:3, flen:6)
- ffffffffa0069c8f + <x>:
- 0: push %rbp
- 1: mov %rsp,%rbp
- 4: sub $0x60,%rsp
- 8: mov %rbx,-0x8(%rbp)
- c: mov 0x68(%rdi),%r9d
- 10: sub 0x6c(%rdi),%r9d
- 14: mov 0xd8(%rdi),%r8
- 1b: mov $0xc,%esi
- 20: callq 0xffffffffe0ff9442
- 25: cmp $0x800,%eax
- 2a: jne 0x0000000000000042
- 2c: mov $0x17,%esi
- 31: callq 0xffffffffe0ff945e
- 36: cmp $0x1,%eax
- 39: jne 0x0000000000000042
- 3b: mov $0xffff,%eax
- 40: jmp 0x0000000000000044
- 42: xor %eax,%eax
- 44: leaveq
- 45: retq
-
- Issuing option `-o` will "annotate" opcodes to resulting assembler
- instructions, which can be very useful for JIT developers:
-
- # ./bpf_jit_disasm -o
- 70 bytes emitted from JIT compiler (pass:3, flen:6)
- ffffffffa0069c8f + <x>:
- 0: push %rbp
- 55
- 1: mov %rsp,%rbp
- 48 89 e5
- 4: sub $0x60,%rsp
- 48 83 ec 60
- 8: mov %rbx,-0x8(%rbp)
- 48 89 5d f8
- c: mov 0x68(%rdi),%r9d
- 44 8b 4f 68
- 10: sub 0x6c(%rdi),%r9d
- 44 2b 4f 6c
- 14: mov 0xd8(%rdi),%r8
- 4c 8b 87 d8 00 00 00
- 1b: mov $0xc,%esi
- be 0c 00 00 00
- 20: callq 0xffffffffe0ff9442
- e8 1d 94 ff e0
- 25: cmp $0x800,%eax
- 3d 00 08 00 00
- 2a: jne 0x0000000000000042
- 75 16
- 2c: mov $0x17,%esi
- be 17 00 00 00
- 31: callq 0xffffffffe0ff945e
- e8 28 94 ff e0
- 36: cmp $0x1,%eax
- 83 f8 01
- 39: jne 0x0000000000000042
- 75 07
- 3b: mov $0xffff,%eax
- b8 ff ff 00 00
- 40: jmp 0x0000000000000044
- eb 02
- 42: xor %eax,%eax
- 31 c0
- 44: leaveq
- c9
- 45: retq
- c3
-
-For BPF JIT developers, bpf_jit_disasm, bpf_asm and bpf_dbg provides a useful
-toolchain for developing and testing the kernel's JIT compiler.
+For JIT developers, doing audits etc, should use `bpftool prog dump` to
+veiw the JIT generated opcode image.
BPF kernel internals
--------------------
diff --git a/arch/arm/net/bpf_jit_32.c b/arch/arm/net/bpf_jit_32.c
index 6a1c9fca5260..39301d59b537 100644
--- a/arch/arm/net/bpf_jit_32.c
+++ b/arch/arm/net/bpf_jit_32.c
@@ -1999,10 +1999,6 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
}
flush_icache_range((u32)header, (u32)(ctx.target + ctx.idx));
- if (bpf_jit_enable > 1)
- /* there are 2 passes here */
- bpf_jit_dump(prog->len, image_size, 2, ctx.target);
-
bpf_jit_binary_lock_ro(header);
prog->bpf_func = (void *)ctx.target;
prog->jited = 1;
diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c
index 62f805f427b7..59c35b4d77b7 100644
--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@@ -1567,10 +1567,6 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
goto out_off;
}
- /* And we're done. */
- if (bpf_jit_enable > 1)
- bpf_jit_dump(prog->len, prog_size, 2, ctx.image);
-
bpf_flush_icache(header, ctx.image + ctx.idx);
if (!prog->is_func || extra_pass) {
diff --git a/arch/loongarch/net/bpf_jit.c b/arch/loongarch/net/bpf_jit.c
index bdcd0c7719a9..ea37f52faa6e 100644
--- a/arch/loongarch/net/bpf_jit.c
+++ b/arch/loongarch/net/bpf_jit.c
@@ -1123,10 +1123,6 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
goto out_offset;
}
- /* And we're done */
- if (bpf_jit_enable > 1)
- bpf_jit_dump(prog->len, image_size, 2, ctx.image);
-
/* Update the icache */
flush_icache_range((unsigned long)header, (unsigned long)(ctx.image + ctx.idx));
diff --git a/arch/mips/net/bpf_jit_comp.c b/arch/mips/net/bpf_jit_comp.c
index b17130d510d4..ccbb7c231cb0 100644
--- a/arch/mips/net/bpf_jit_comp.c
+++ b/arch/mips/net/bpf_jit_comp.c
@@ -1012,9 +1012,6 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
flush_icache_range((unsigned long)header,
(unsigned long)&ctx.target[ctx.jit_index]);
- if (bpf_jit_enable > 1)
- bpf_jit_dump(prog->len, image_size, 2, ctx.target);
-
prog->bpf_func = (void *)ctx.target;
prog->jited = 1;
prog->jited_len = image_size;
diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c
index 43e634126514..f0f7d8ff2022 100644
--- a/arch/powerpc/net/bpf_jit_comp.c
+++ b/arch/powerpc/net/bpf_jit_comp.c
@@ -262,20 +262,9 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
goto out_addrs;
}
bpf_jit_build_epilogue(code_base, &cgctx);
-
- if (bpf_jit_enable > 1)
- pr_info("Pass %d: shrink = %d, seen = 0x%x\n", pass,
- proglen - (cgctx.idx * 4), cgctx.seen);
}
skip_codegen_passes:
- if (bpf_jit_enable > 1)
- /*
- * Note that we output the base address of the code_base
- * rather than image, since opcodes are in code_base.
- */
- bpf_jit_dump(flen, proglen, pass, code_base);
-
#ifdef CONFIG_PPC64_ELF_ABI_V1
/* Function descriptor nastiness: Address + TOC */
((u64 *)image)[0] = (u64)code_base;
diff --git a/arch/riscv/net/bpf_jit_core.c b/arch/riscv/net/bpf_jit_core.c
index 737baf8715da..ff168c50d46a 100644
--- a/arch/riscv/net/bpf_jit_core.c
+++ b/arch/riscv/net/bpf_jit_core.c
@@ -151,9 +151,6 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
}
bpf_jit_build_epilogue(ctx);
- if (bpf_jit_enable > 1)
- bpf_jit_dump(prog->len, prog_size, pass, ctx->insns);
-
prog->bpf_func = (void *)ctx->insns;
prog->jited = 1;
prog->jited_len = prog_size;
diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index af35052d06ed..13d996e27602 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -1831,10 +1831,6 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
fp = orig_fp;
goto free_addrs;
}
- if (bpf_jit_enable > 1) {
- bpf_jit_dump(fp->len, jit.size, pass, jit.prg_buf);
- print_fn_code(jit.prg_buf, jit.size_prg);
- }
if (!fp->is_func || extra_pass) {
bpf_jit_binary_lock_ro(header);
} else {
diff --git a/arch/sparc/net/bpf_jit_comp_32.c b/arch/sparc/net/bpf_jit_comp_32.c
index a74e5004c6c8..08de0ed84831 100644
--- a/arch/sparc/net/bpf_jit_comp_32.c
+++ b/arch/sparc/net/bpf_jit_comp_32.c
@@ -743,9 +743,6 @@ cond_branch: f_offset = addrs[i + filter[i].jf];
oldproglen = proglen;
}
- if (bpf_jit_enable > 1)
- bpf_jit_dump(flen, proglen, pass + 1, image);
-
if (image) {
fp->bpf_func = (void *)image;
fp->jited = 1;
diff --git a/arch/sparc/net/bpf_jit_comp_64.c b/arch/sparc/net/bpf_jit_comp_64.c
index fa0759bfe498..14c9e5ce4100 100644
--- a/arch/sparc/net/bpf_jit_comp_64.c
+++ b/arch/sparc/net/bpf_jit_comp_64.c
@@ -1549,16 +1549,6 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
}
build_epilogue(&ctx);
- if (bpf_jit_enable > 1)
- pr_info("Pass %d: size = %u, seen = [%c%c%c%c%c%c]\n", pass,
- ctx.idx * 4,
- ctx.tmp_1_used ? '1' : ' ',
- ctx.tmp_2_used ? '2' : ' ',
- ctx.tmp_3_used ? '3' : ' ',
- ctx.saw_frame_pointer ? 'F' : ' ',
- ctx.saw_call ? 'C' : ' ',
- ctx.saw_tail_call ? 'T' : ' ');
-
if (ctx.idx * 4 == prev_image_size)
break;
prev_image_size = ctx.idx * 4;
@@ -1596,9 +1586,6 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
goto out_off;
}
- if (bpf_jit_enable > 1)
- bpf_jit_dump(prog->len, image_size, pass, ctx.image);
-
bpf_flush_icache(header, (u8 *)header + header->size);
if (!prog->is_func || extra_pass) {
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index e3e2b57e4e13..197ff8651a56 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -2551,9 +2551,6 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
cond_resched();
}
- if (bpf_jit_enable > 1)
- bpf_jit_dump(prog->len, proglen, pass + 1, image);
-
if (image) {
if (!prog->is_func || extra_pass) {
/*
diff --git a/arch/x86/net/bpf_jit_comp32.c b/arch/x86/net/bpf_jit_comp32.c
index 429a89c5468b..ca53f20aca73 100644
--- a/arch/x86/net/bpf_jit_comp32.c
+++ b/arch/x86/net/bpf_jit_comp32.c
@@ -2597,9 +2597,6 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *prog)
cond_resched();
}
- if (bpf_jit_enable > 1)
- bpf_jit_dump(prog->len, proglen, pass + 1, image);
-
if (image) {
bpf_jit_binary_lock_ro(header);
prog->bpf_func = (void *)image;
diff --git a/net/core/sysctl_net_core.c b/net/core/sysctl_net_core.c
index 5b1ce656baa1..731a2eb0f68e 100644
--- a/net/core/sysctl_net_core.c
+++ b/net/core/sysctl_net_core.c
@@ -275,16 +275,8 @@ static int proc_dointvec_minmax_bpf_enable(struct ctl_table *table, int write,
tmp.data = &jit_enable;
ret = proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos);
- if (write && !ret) {
- if (jit_enable < 2 ||
- (jit_enable == 2 && bpf_dump_raw_ok(current_cred()))) {
- *(int *)table->data = jit_enable;
- if (jit_enable == 2)
- pr_warn("bpf_jit_enable = 2 was set! NEVER use this in production, only for JIT debugging!\n");
- } else {
- ret = -EPERM;
- }
- }
+ if (write && !ret)
+ *(int *)table->data = jit_enable;
if (write && ret && min == max)
pr_info_once("CONFIG_BPF_JIT_ALWAYS_ON is enabled, bpf_jit_enable is permanently set to 1.\n");
@@ -395,7 +387,7 @@ static struct ctl_table net_core_table[] = {
.extra2 = SYSCTL_ONE,
# else
.extra1 = SYSCTL_ZERO,
- .extra2 = SYSCTL_TWO,
+ .extra2 = SYSCTL_ONE,
# endif
},
# ifdef CONFIG_HAVE_EBPF_JIT
diff --git a/tools/bpf/.gitignore b/tools/bpf/.gitignore
index cf53342175e7..5c70cfb9092e 100644
--- a/tools/bpf/.gitignore
+++ b/tools/bpf/.gitignore
@@ -4,4 +4,3 @@ feature
bpf_asm
bpf_dbg
bpf_exp.yacc.*
-bpf_jit_disasm
diff --git a/tools/bpf/Makefile b/tools/bpf/Makefile
index 243b79f2b451..9264d7b0edf6 100644
--- a/tools/bpf/Makefile
+++ b/tools/bpf/Makefile
@@ -74,14 +74,10 @@ $(OUTPUT)%.yacc.o: $(OUTPUT)%.yacc.c
$(OUTPUT)%.lex.o: $(OUTPUT)%.lex.c
$(QUIET_CC)$(CC) $(CFLAGS) -c -o $@ $<
-PROGS = $(OUTPUT)bpf_jit_disasm $(OUTPUT)bpf_dbg $(OUTPUT)bpf_asm
+PROGS = $(OUTPUT)bpf_dbg $(OUTPUT)bpf_asm
all: $(PROGS) bpftool runqslower
-$(OUTPUT)bpf_jit_disasm: CFLAGS += -DPACKAGE='bpf_jit_disasm'
-$(OUTPUT)bpf_jit_disasm: $(OUTPUT)bpf_jit_disasm.o
- $(QUIET_LINK)$(CC) $(CFLAGS) -o $@ $^ -lopcodes -lbfd -ldl
-
$(OUTPUT)bpf_dbg: $(OUTPUT)bpf_dbg.o
$(QUIET_LINK)$(CC) $(CFLAGS) -o $@ $^ -lreadline
@@ -94,16 +90,14 @@ $(OUTPUT)bpf_exp.lex.o: $(OUTPUT)bpf_exp.lex.c
clean: bpftool_clean runqslower_clean resolve_btfids_clean
$(call QUIET_CLEAN, bpf-progs)
- $(Q)$(RM) -r -- $(OUTPUT)*.o $(OUTPUT)bpf_jit_disasm $(OUTPUT)bpf_dbg \
+ $(Q)$(RM) -r -- $(OUTPUT)*.o $(OUTPUT)bpf_dbg \
$(OUTPUT)bpf_asm $(OUTPUT)bpf_exp.yacc.* $(OUTPUT)bpf_exp.lex.*
$(call QUIET_CLEAN, core-gen)
$(Q)$(RM) -- $(OUTPUT)FEATURE-DUMP.bpf
$(Q)$(RM) -r -- $(OUTPUT)feature
install: $(PROGS) bpftool_install
- $(call QUIET_INSTALL, bpf_jit_disasm)
$(Q)$(INSTALL) -m 0755 -d $(DESTDIR)$(prefix)/bin
- $(Q)$(INSTALL) $(OUTPUT)bpf_jit_disasm $(DESTDIR)$(prefix)/bin/bpf_jit_disasm
$(call QUIET_INSTALL, bpf_dbg)
$(Q)$(INSTALL) $(OUTPUT)bpf_dbg $(DESTDIR)$(prefix)/bin/bpf_dbg
$(call QUIET_INSTALL, bpf_asm)
diff --git a/tools/bpf/bpf_jit_disasm.c b/tools/bpf/bpf_jit_disasm.c
deleted file mode 100644
index a90a5d110f92..000000000000
--- a/tools/bpf/bpf_jit_disasm.c
+++ /dev/null
@@ -1,332 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Minimal BPF JIT image disassembler
- *
- * Disassembles BPF JIT compiler emitted opcodes back to asm insn's for
- * debugging or verification purposes.
- *
- * To get the disassembly of the JIT code, do the following:
- *
- * 1) `echo 2 > /proc/sys/net/core/bpf_jit_enable`
- * 2) Load a BPF filter (e.g. `tcpdump -p -n -s 0 -i eth1 host 192.168.20.0/24`)
- * 3) Run e.g. `bpf_jit_disasm -o` to read out the last JIT code
- *
- * Copyright 2013 Daniel Borkmann <borkmann at redhat.com>
- */
-
-#include <stdint.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <assert.h>
-#include <unistd.h>
-#include <string.h>
-#include <bfd.h>
-#include <dis-asm.h>
-#include <regex.h>
-#include <fcntl.h>
-#include <sys/klog.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <limits.h>
-#include <tools/dis-asm-compat.h>
-
-#define CMD_ACTION_SIZE_BUFFER 10
-#define CMD_ACTION_READ_ALL 3
-
-static void get_exec_path(char *tpath, size_t size)
-{
- char *path;
- ssize_t len;
-
- snprintf(tpath, size, "/proc/%d/exe", (int) getpid());
- tpath[size - 1] = 0;
-
- path = strdup(tpath);
- assert(path);
-
- len = readlink(path, tpath, size);
- tpath[len] = 0;
-
- free(path);
-}
-
-static void get_asm_insns(uint8_t *image, size_t len, int opcodes)
-{
- int count, i, pc = 0;
- char tpath[PATH_MAX];
- struct disassemble_info info;
- disassembler_ftype disassemble;
- bfd *bfdf;
-
- memset(tpath, 0, sizeof(tpath));
- get_exec_path(tpath, sizeof(tpath));
-
- bfdf = bfd_openr(tpath, NULL);
- assert(bfdf);
- assert(bfd_check_format(bfdf, bfd_object));
-
- init_disassemble_info_compat(&info, stdout,
- (fprintf_ftype) fprintf,
- fprintf_styled);
- info.arch = bfd_get_arch(bfdf);
- info.mach = bfd_get_mach(bfdf);
- info.buffer = image;
- info.buffer_length = len;
-
- disassemble_init_for_target(&info);
-
-#ifdef DISASM_FOUR_ARGS_SIGNATURE
- disassemble = disassembler(info.arch,
- bfd_big_endian(bfdf),
- info.mach,
- bfdf);
-#else
- disassemble = disassembler(bfdf);
-#endif
- assert(disassemble);
-
- do {
- printf("%4x:\t", pc);
-
- count = disassemble(pc, &info);
-
- if (opcodes) {
- printf("\n\t");
- for (i = 0; i < count; ++i)
- printf("%02x ", (uint8_t) image[pc + i]);
- }
- printf("\n");
-
- pc += count;
- } while(count > 0 && pc < len);
-
- bfd_close(bfdf);
-}
-
-static char *get_klog_buff(unsigned int *klen)
-{
- int ret, len;
- char *buff;
-
- len = klogctl(CMD_ACTION_SIZE_BUFFER, NULL, 0);
- if (len < 0)
- return NULL;
-
- buff = malloc(len);
- if (!buff)
- return NULL;
-
- ret = klogctl(CMD_ACTION_READ_ALL, buff, len);
- if (ret < 0) {
- free(buff);
- return NULL;
- }
-
- *klen = ret;
- return buff;
-}
-
-static char *get_flog_buff(const char *file, unsigned int *klen)
-{
- int fd, ret, len;
- struct stat fi;
- char *buff;
-
- fd = open(file, O_RDONLY);
- if (fd < 0)
- return NULL;
-
- ret = fstat(fd, &fi);
- if (ret < 0 || !S_ISREG(fi.st_mode))
- goto out;
-
- len = fi.st_size + 1;
- buff = malloc(len);
- if (!buff)
- goto out;
-
- memset(buff, 0, len);
- ret = read(fd, buff, len - 1);
- if (ret <= 0)
- goto out_free;
-
- close(fd);
- *klen = ret;
- return buff;
-out_free:
- free(buff);
-out:
- close(fd);
- return NULL;
-}
-
-static char *get_log_buff(const char *file, unsigned int *klen)
-{
- return file ? get_flog_buff(file, klen) : get_klog_buff(klen);
-}
-
-static void put_log_buff(char *buff)
-{
- free(buff);
-}
-
-static uint8_t *get_last_jit_image(char *haystack, size_t hlen,
- unsigned int *ilen)
-{
- char *ptr, *pptr, *tmp;
- off_t off = 0;
- unsigned int proglen;
- int ret, flen, pass, ulen = 0;
- regmatch_t pmatch[1];
- unsigned long base;
- regex_t regex;
- uint8_t *image;
-
- if (hlen == 0)
- return NULL;
-
- ret = regcomp(®ex, "flen=[[:alnum:]]+ proglen=[[:digit:]]+ "
- "pass=[[:digit:]]+ image=[[:xdigit:]]+", REG_EXTENDED);
- assert(ret == 0);
-
- ptr = haystack;
- memset(pmatch, 0, sizeof(pmatch));
-
- while (1) {
- ret = regexec(®ex, ptr, 1, pmatch, 0);
- if (ret == 0) {
- ptr += pmatch[0].rm_eo;
- off += pmatch[0].rm_eo;
- assert(off < hlen);
- } else
- break;
- }
-
- ptr = haystack + off - (pmatch[0].rm_eo - pmatch[0].rm_so);
- ret = sscanf(ptr, "flen=%d proglen=%u pass=%d image=%lx",
- &flen, &proglen, &pass, &base);
- if (ret != 4) {
- regfree(®ex);
- return NULL;
- }
- if (proglen > 1000000) {
- printf("proglen of %d too big, stopping\n", proglen);
- return NULL;
- }
-
- image = malloc(proglen);
- if (!image) {
- printf("Out of memory\n");
- return NULL;
- }
- memset(image, 0, proglen);
-
- tmp = ptr = haystack + off;
- while ((ptr = strtok(tmp, "\n")) != NULL && ulen < proglen) {
- tmp = NULL;
- if (!strstr(ptr, "JIT code"))
- continue;
- pptr = ptr;
- while ((ptr = strstr(pptr, ":")))
- pptr = ptr + 1;
- ptr = pptr;
- do {
- image[ulen++] = (uint8_t) strtoul(pptr, &pptr, 16);
- if (ptr == pptr) {
- ulen--;
- break;
- }
- if (ulen >= proglen)
- break;
- ptr = pptr;
- } while (1);
- }
-
- assert(ulen == proglen);
- printf("%u bytes emitted from JIT compiler (pass:%d, flen:%d)\n",
- proglen, pass, flen);
- printf("%lx + <x>:\n", base);
-
- regfree(®ex);
- *ilen = ulen;
- return image;
-}
-
-static void usage(void)
-{
- printf("Usage: bpf_jit_disasm [...]\n");
- printf(" -o Also display related opcodes (default: off).\n");
- printf(" -O <file> Write binary image of code to file, don't disassemble to stdout.\n");
- printf(" -f <file> Read last image dump from file or stdin (default: klog).\n");
- printf(" -h Display this help.\n");
-}
-
-int main(int argc, char **argv)
-{
- unsigned int len, klen, opt, opcodes = 0;
- char *kbuff, *file = NULL;
- char *ofile = NULL;
- int ofd;
- ssize_t nr;
- uint8_t *pos;
- uint8_t *image = NULL;
-
- while ((opt = getopt(argc, argv, "of:O:")) != -1) {
- switch (opt) {
- case 'o':
- opcodes = 1;
- break;
- case 'O':
- ofile = optarg;
- break;
- case 'f':
- file = optarg;
- break;
- default:
- usage();
- return -1;
- }
- }
-
- bfd_init();
-
- kbuff = get_log_buff(file, &klen);
- if (!kbuff) {
- fprintf(stderr, "Could not retrieve log buffer!\n");
- return -1;
- }
-
- image = get_last_jit_image(kbuff, klen, &len);
- if (!image) {
- fprintf(stderr, "No JIT image found!\n");
- goto done;
- }
- if (!ofile) {
- get_asm_insns(image, len, opcodes);
- goto done;
- }
-
- ofd = open(ofile, O_WRONLY | O_CREAT | O_TRUNC, DEFFILEMODE);
- if (ofd < 0) {
- fprintf(stderr, "Could not open file %s for writing: ", ofile);
- perror(NULL);
- goto done;
- }
- pos = image;
- do {
- nr = write(ofd, pos, len);
- if (nr < 0) {
- fprintf(stderr, "Could not write data to %s: ", ofile);
- perror(NULL);
- goto done;
- }
- len -= nr;
- pos += nr;
- } while (len);
- close(ofd);
-
-done:
- put_log_buff(kbuff);
- free(image);
- return 0;
-}
--
2.27.0
More information about the linux-riscv
mailing list