[PATCH] riscv, kprobes: Stricter c.jr/c.jalr decoding
Björn Töpel
bjorn at kernel.org
Mon Jan 2 08:07:48 PST 2023
From: Björn Töpel <bjorn at rivosinc.com>
In the compressed instruction extension, c.jr, c.jalr, c.mv, and c.add
is encoded the following way (each instruction is 16b):
---+-+-----------+-----------+--
100 0 rs1[4:0]!=0 00000 10 : c.jr
100 1 rs1[4:0]!=0 00000 10 : c.jalr
100 0 rd[4:0]!=0 rs2[4:0]!=0 10 : c.mv
100 1 rd[4:0]!=0 rs2[4:0]!=0 10 : c.add
The following logic is used to decode c.jr and c.jalr:
insn & 0xf007 == 0x8002 => instruction is an c.jr
insn & 0xf007 == 0x9002 => instruction is an c.jalr
When 0xf007 is used to mask the instruction, c.mv can be incorrectly
decoded as c.jr, and c.add as c.jalr.
Correct the decoding by changing the mask from 0xf007 to 0xf07f.
Fixes: c22b0bcb1dd0 ("riscv: Add kprobes supported")
Signed-off-by: Björn Töpel <bjorn at rivosinc.com>
---
arch/riscv/kernel/probes/simulate-insn.h | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/riscv/kernel/probes/simulate-insn.h b/arch/riscv/kernel/probes/simulate-insn.h
index cb6ff7dccb92..de8474146a9b 100644
--- a/arch/riscv/kernel/probes/simulate-insn.h
+++ b/arch/riscv/kernel/probes/simulate-insn.h
@@ -31,9 +31,9 @@ __RISCV_INSN_FUNCS(fence, 0x7f, 0x0f);
} while (0)
__RISCV_INSN_FUNCS(c_j, 0xe003, 0xa001);
-__RISCV_INSN_FUNCS(c_jr, 0xf007, 0x8002);
+__RISCV_INSN_FUNCS(c_jr, 0xf07f, 0x8002);
__RISCV_INSN_FUNCS(c_jal, 0xe003, 0x2001);
-__RISCV_INSN_FUNCS(c_jalr, 0xf007, 0x9002);
+__RISCV_INSN_FUNCS(c_jalr, 0xf07f, 0x9002);
__RISCV_INSN_FUNCS(c_beqz, 0xe003, 0xc001);
__RISCV_INSN_FUNCS(c_bnez, 0xe003, 0xe001);
__RISCV_INSN_FUNCS(c_ebreak, 0xffff, 0x9002);
base-commit: 1b929c02afd37871d5afb9d498426f83432e71c2
--
2.37.2
More information about the linux-riscv
mailing list