[patch 00/37] cpu/hotplug, x86: Reworked parallel CPU bringup
Thomas Gleixner
tglx at linutronix.de
Thu Apr 20 08:57:31 PDT 2023
On Thu, Apr 20 2023 at 07:51, Sean Christopherson wrote:
> On Thu, Apr 20, 2023, Thomas Gleixner wrote:
>> On Thu, Apr 20 2023 at 10:23, Andrew Cooper wrote:
>> > On 20/04/2023 9:32 am, Thomas Gleixner wrote:
>> > > On Wed, Apr 19, 2023, Andrew Cooper wrote:
>> > > > This was changed in x2APIC, which made the x2APIC_ID immutable.
>>
>> >> I'm pondering to simply deny parallel mode if x2APIC is not there.
>> >
>> > I'm not sure if that will help much.
>>
>> Spoilsport.
>
> LOL, well let me pile on then. x2APIC IDs aren't immutable on AMD hardware. The
> ID is read-only when the CPU is in x2APIC mode, but any changes made to the ID
> while the CPU is in xAPIC mode survive the transition to x2APIC. From the APM:
>
> A value previously written by software to the 8-bit APIC_ID register (MMIO offset
> 30h) is converted by hardware into the appropriate format and reflected into the
> 32-bit x2APIC_ID register (MSR 802h).
>
> FWIW, my observations from testing on bare metal are that the xAPIC ID is effectively
> read-only (writes are dropped) on Intel CPUs as far back as Haswell, while the above
> behavior described in the APM holds true on at least Rome and Milan.
>
> My guess is that Intel's uArch specific behavior of the xAPIC ID being read-only
> was introduced when x2APIC came along, but I didn't test farther back than Haswell.
I'm not so worried about modern hardware. The horrorshow is the old muck
as demonstrated and of course there is virt :)
Something like the completely untested below should just work whatever
APIC ID the BIOS decided to dice.
That might just work on SEV too without that GHCB muck, but what do I
know.
Thanks,
tglx
---
--- a/arch/x86/include/asm/apicdef.h
+++ b/arch/x86/include/asm/apicdef.h
@@ -138,7 +138,8 @@
#define APIC_EILVT_MASKED (1 << 16)
#define APIC_BASE (fix_to_virt(FIX_APIC_BASE))
-#define APIC_BASE_MSR 0x800
+#define APIC_BASE_MSR 0x800
+#define APIC_X2APIC_ID_MSR 0x802
#define XAPIC_ENABLE (1UL << 11)
#define X2APIC_ENABLE (1UL << 10)
@@ -162,6 +163,7 @@
#define APIC_CPUID(apicid) ((apicid) & XAPIC_DEST_CPUS_MASK)
#define NUM_APIC_CLUSTERS ((BAD_APICID + 1) >> XAPIC_DEST_CPUS_SHIFT)
+#ifndef __ASSEMBLY__
/*
* the local APIC register structure, memory mapped. Not terribly well
* tested, but we might eventually use this one in the future - the
@@ -435,4 +437,5 @@ enum apic_delivery_modes {
APIC_DELIVERY_MODE_EXTINT = 7,
};
+#endif /* !__ASSEMBLY__ */
#endif /* _ASM_X86_APICDEF_H */
--- a/arch/x86/include/asm/smp.h
+++ b/arch/x86/include/asm/smp.h
@@ -195,14 +195,13 @@ extern void nmi_selftest(void);
#endif
extern unsigned int smpboot_control;
+extern unsigned long apic_mmio_base;
#endif /* !__ASSEMBLY__ */
/* Control bits for startup_64 */
-#define STARTUP_APICID_CPUID_1F 0x80000000
-#define STARTUP_APICID_CPUID_0B 0x40000000
-#define STARTUP_APICID_CPUID_01 0x20000000
-#define STARTUP_APICID_SEV_ES 0x10000000
+#define STARTUP_READ_APICID 0x80000000
+#define STARTUP_APICID_SEV_ES 0x40000000
/* Top 8 bits are reserved for control */
#define STARTUP_PARALLEL_MASK 0xFF000000
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -101,6 +101,8 @@ static int apic_extnmi __ro_after_init =
*/
static bool virt_ext_dest_id __ro_after_init;
+unsigned long apic_mmio_base __ro_after_init;
+
/*
* Map cpu index to physical APIC ID
*/
@@ -2164,6 +2166,7 @@ void __init register_lapic_address(unsig
if (!x2apic_mode) {
set_fixmap_nocache(FIX_APIC_BASE, address);
+ apic_mmio_base = APIC_BASE;
apic_printk(APIC_VERBOSE, "mapped APIC to %16lx (%16lx)\n",
APIC_BASE, address);
}
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -24,8 +24,10 @@
#include "../entry/calling.h"
#include <asm/export.h>
#include <asm/nospec-branch.h>
+#include <asm/apicdef.h>
#include <asm/fixmap.h>
#include <asm/smp.h>
+
#include <asm/sev-common.h>
/*
@@ -237,37 +239,24 @@ SYM_INNER_LABEL(secondary_startup_64_no_
#ifdef CONFIG_SMP
/*
- * For parallel boot, the APIC ID is retrieved from CPUID, and then
- * used to look up the CPU number. For booting a single CPU, the
- * CPU number is encoded in smpboot_control.
+ * For parallel boot, the APIC ID is either retrieved the APIC or
+ * from CPUID, and then used to look up the CPU number.
+ * For booting a single CPU, the CPU number is encoded in
+ * smpboot_control.
*
- * Bit 31 STARTUP_APICID_CPUID_1F flag (use CPUID 0x1f)
- * Bit 30 STARTUP_APICID_CPUID_0B flag (use CPUID 0x0b)
- * Bit 29 STARTUP_APICID_CPUID_01 flag (use CPUID 0x01)
- * Bit 28 STARTUP_APICID_SEV_ES flag (CPUID 0x0b via GHCB MSR)
+ * Bit 31 STARTUP_APICID_READ (Read APICID from APIC)
+ * Bit 30 STARTUP_APICID_SEV_ES flag (CPUID 0x0b via GHCB MSR)
* Bit 0-23 CPU# if STARTUP_APICID_CPUID_xx flags are not set
*/
movl smpboot_control(%rip), %ecx
+ testl $STARTUP_READ_APICID, %ecx
#ifdef CONFIG_AMD_MEM_ENCRYPT
testl $STARTUP_APICID_SEV_ES, %ecx
jnz .Luse_sev_cpuid_0b
#endif
- testl $STARTUP_APICID_CPUID_1F, %ecx
- jnz .Luse_cpuid_1f
- testl $STARTUP_APICID_CPUID_0B, %ecx
- jnz .Luse_cpuid_0b
- testl $STARTUP_APICID_CPUID_01, %ecx
- jnz .Luse_cpuid_01
andl $(~STARTUP_PARALLEL_MASK), %ecx
jmp .Lsetup_cpu
-.Luse_cpuid_01:
- mov $0x01, %eax
- cpuid
- mov %ebx, %edx
- shr $24, %edx
- jmp .Lsetup_AP
-
#ifdef CONFIG_AMD_MEM_ENCRYPT
.Luse_sev_cpuid_0b:
/* Set the GHCB MSR to request CPUID 0x0B_EDX */
@@ -292,24 +281,30 @@ SYM_INNER_LABEL(secondary_startup_64_no_
jmp .Lsetup_AP
#endif
-.Luse_cpuid_0b:
- mov $0x0B, %eax
- xorl %ecx, %ecx
- cpuid
- jmp .Lsetup_AP
+.Lread_apicid:
+ mov $MSR_IA32_APICBASE, %ecx
+ rdmsr
+ testl $X2APIC_ENABLE, %eax
+ jnz read_apicid_msr
+
+ /* Read the APIC ID from the fix-mapped MMIO space. */
+ movq apic_mmio_base(%rip), %rcx
+ addq $APIC_ID, %rcx
+ movl (%rcx), %eax
+ shr $24, %eax
+ jnz .Lread_apicid
-.Luse_cpuid_1f:
- mov $0x1f, %eax
- xorl %ecx, %ecx
- cpuid
+.Lread_apicid_msr:
+ mov $APIC_X2APIC_ID_MSR, %ecx
+ rdmsr
.Lsetup_AP:
- /* EDX contains the APIC ID of the current CPU */
+ /* EAX contains the APIC ID of the current CPU */
xorq %rcx, %rcx
leaq cpuid_to_apicid(%rip), %rbx
.Lfind_cpunr:
- cmpl (%rbx,%rcx,4), %edx
+ cmpl (%rbx,%rcx,4), %eax
jz .Lsetup_cpu
inc %ecx
#ifdef CONFIG_FORCE_NR_CPUS
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -1253,41 +1253,22 @@ bool __init arch_cpuhp_init_parallel_bri
return false;
}
- /* Encrypted guests require special CPUID handling. */
+ /* Encrypted guests require special handling. */
if (cc_platform_has(CC_ATTR_GUEST_STATE_ENCRYPT)) {
switch (cc_get_vendor()) {
case CC_VENDOR_AMD:
ctrl = STARTUP_APICID_SEV_ES;
if (topology_extended_leaf == 0x0b)
- goto setup;
+ break;
fallthrough;
default:
pr_info("Parallel CPU startup disabled due to guest state encryption\n");
return false;
}
+ } else {
+ ctrl = STARTUP_READ_APICID;
}
- switch (topology_extended_leaf) {
- case 0x0b:
- ctrl = STARTUP_APICID_CPUID_0B;
- break;
- case 0x1f:
- ctrl = STARTUP_APICID_CPUID_1F;
- break;
- case 0x00:
- /* For !x2APIC mode 8 bits from leaf 0x01 are sufficient. */
- if (!x2apic_mode) {
- ctrl = STARTUP_APICID_CPUID_01;
- break;
- }
- fallthrough;
- default:
- pr_info("Parallel CPU startup disabled. Unsupported topology leaf %u\n",
- topology_extended_leaf);
- return false;
- }
-
-setup:
pr_debug("Parallel CPU startup enabled: 0x%08x\n", ctrl);
smpboot_control = ctrl;
return true;
More information about the linux-riscv
mailing list