[PATCH v1 1/3] dt-binding: pci: add JH7110 PCIe dt-binding documents.

[Bin Meng]

On Thu, Apr 6, 2023 at 7:59 PM Minda Chen <minda.chen at starfivetech.com> wrote:
>
> Add PCIe controller driver dt-binding documents
> for StarFive JH7110 SoC platform.
>
> Signed-off-by: Minda Chen <minda.chen at starfivetech.com>
> ---
>  .../bindings/pci/starfive,jh7110-pcie.yaml    | 163 ++++++++++++++++++
>  1 file changed, 163 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
>
> diff --git a/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
> new file mode 100644
> index 000000000000..fa4829766195
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
> @@ -0,0 +1,163 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/starfive,jh7110-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: StarFive JH7110 PCIe 2.0 host controller
> +
> +maintainers:
> +  - Minda Chen <minda.chen at starfivetech.com>
> +
> +allOf:
> +  - $ref: /schemas/pci/pci-bus.yaml#
> +  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
> +
> +properties:
> +  compatible:
> +    const: starfive,jh7110-pcie

Since this is a PLDA IP that is likely to be reused by other vendors,
should this indicate the PLDA in the string?

Or the file name should be renamed to something like the synopsis dw-pcie?

> +
> +  reg:
> +    maxItems: 2
> +
> +  reg-names:
> +    items:
> +      - const: reg
> +      - const: config
> +
> +  msi-parent: true
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 4
> +
> +  clock-names:
> +    items:
> +      - const: noc
> +      - const: tl
> +      - const: axi_mst0
> +      - const: apb
> +
> +  resets:
> +    items:
> +      - description: AXI MST0 reset
> +      - description: AXI SLAVE reset
> +      - description: AXI SLAVE0 reset
> +      - description: PCIE BRIDGE reset
> +      - description: PCIE CORE reset
> +      - description: PCIE APB reset
> +
> +  reset-names:
> +    items:
> +      - const: mst0
> +      - const: slv0
> +      - const: slv
> +      - const: brg
> +      - const: core
> +      - const: apb
> +
> +  starfive,stg-syscon:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    items:
> +      items:
> +        - description: phandle to System Register Controller stg_syscon node.
> +        - description: register0 offset of STG_SYSCONSAIF__SYSCFG register for PCIe.
> +        - description: register1 offset of STG_SYSCONSAIF__SYSCFG register for PCIe.
> +        - description: register2 offset of STG_SYSCONSAIF__SYSCFG register for PCIe.
> +        - description: register3 offset of STG_SYSCONSAIF__SYSCFG register for PCIe.
> +    description:
> +      The phandle to System Register Controller syscon node and the offset
> +      of STG_SYSCONSAIF__SYSCFG register for PCIe. Total 4 regsisters offset
> +      for PCIe.
> +
> +  pwren-gpios:
> +    description: Should specify the GPIO for controlling the PCI bus device power on.
> +    maxItems: 1
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +  phys:
> +    maxItems: 1
> +
> +  interrupt-controller:
> +    type: object
> +    properties:
> +      '#address-cells':
> +        const: 0
> +
> +      '#interrupt-cells':
> +        const: 1
> +
> +      interrupt-controller: true
> +
> +    required:
> +      - '#address-cells'
> +      - '#interrupt-cells'
> +      - interrupt-controller
> +
> +    additionalProperties: false
> +
> +required:
> +  - reg
> +  - reg-names
> +  - "#interrupt-cells"
> +  - interrupts
> +  - interrupt-map-mask
> +  - interrupt-map
> +  - clocks
> +  - clock-names
> +  - resets
> +  - msi-controller
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    bus {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        pcie0: pcie at 2B000000 {
> +            compatible = "starfive,jh7110-pcie";
> +            #address-cells = <3>;
> +            #size-cells = <2>;
> +            #interrupt-cells = <1>;
> +            reg = <0x0 0x2B000000 0x0 0x1000000>,
> +                  <0x9 0x40000000 0x0 0x10000000>;
> +            reg-names = "reg", "config";
> +            device_type = "pci";
> +            starfive,stg-syscon = <&stg_syscon 0xc0 0xc4 0x130 0x1b8>;
> +            bus-range = <0x0 0xff>;
> +            ranges = <0x82000000  0x0 0x30000000  0x0 0x30000000 0x0 0x08000000>,
> +                     <0xc3000000  0x9 0x00000000  0x9 0x00000000 0x0 0x40000000>;
> +            interrupt-parent = <&plic>;
> +            interrupts = <56>;
> +            interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> +            interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc0 0x1>,
> +                            <0x0 0x0 0x0 0x2 &pcie_intc0 0x2>,
> +                            <0x0 0x0 0x0 0x3 &pcie_intc0 0x3>,
> +                            <0x0 0x0 0x0 0x4 &pcie_intc0 0x4>;
> +            msi-parent = <&pcie0>;
> +            msi-controller;
> +            clocks = <&syscrg 86>,
> +                     <&stgcrg 10>,
> +                     <&stgcrg 8>,
> +                     <&stgcrg 9>;
> +            clock-names = "noc", "tl", "axi_mst0", "apb";
> +            resets = <&stgcrg 11>,
> +                     <&stgcrg 12>,
> +                     <&stgcrg 13>,
> +                     <&stgcrg 14>,
> +                     <&stgcrg 15>,
> +                     <&stgcrg 16>;
> +
> +            pcie_intc0: interrupt-controller {
> +                #address-cells = <0>;
> +                #interrupt-cells = <1>;
> +                interrupt-controller;
> +            };
> +        };
> +    };
> --

Regards,
Bin