[PATCH v1 1/3] riscv: dts: starfive: Enable axp15060 pmic for cpufreq

[Shengyu Qu]

> On Tue, Apr 11, 2023 at 04:32:55PM +0800, Mason Huo wrote:
>> The VisionFive 2 board has an embedded pmic axp15060,
>> which supports the cpu DVFS through the dcdc2 regulator.
>> This patch enables axp15060 pmic and configs the dcdc2.
>>
>> Signed-off-by: Mason Huo <mason.huo at starfivetech.com>
>> ---
>>   .../starfive/jh7110-starfive-visionfive-2.dtsi    | 15 +++++++++++++++
>>   1 file changed, 15 insertions(+)
>>
>> diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
>> index 2a6d81609284..df582bddae4b 100644
>> --- a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
>> +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
>> @@ -114,6 +114,21 @@ &i2c5 {
>>   	pinctrl-names = "default";
>>   	pinctrl-0 = <&i2c5_pins>;
>>   	status = "okay";
>> +
>> +	pmic: axp15060_reg at 36 {
> No underscores in node names please & "pmic" is the generic node name
> for pmics.
>
> Cheers,
> Conor.
>
>> +		compatible = "x-powers,axp15060";
>> +		reg = <0x36>;
>> +
>> +		regulators {
>> +			reg_dcdc2: dcdc2 {

reg_dcdc2 seems not a good name, too generic for identification. In most

cases, it's same as regulator-name but using "_" rather than "-".

>> +				regulator-boot-on;

It should not be used,  in Documentation/devicetree/bindings/regulator

/regulator.yaml, it is described as follows:

"This property is intended to only be used for regulators where software

cannot read the state of the regulator."

In this case, regulator state is completely able to be read by driver.

Best regards,

Shengyu

-------------- next part --------------
A non-text attachment was scrubbed...
Name: OpenPGP_0xE3520CC91929C8E7.asc
Type: application/pgp-keys
Size: 6868 bytes
Desc: OpenPGP public key
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20230411/2e70746f/attachment.bin>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: OpenPGP_signature
Type: application/pgp-signature
Size: 833 bytes
Desc: OpenPGP digital signature
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20230411/2e70746f/attachment.sig>