[PATCH v1 1/3] dt-binding: pci: add JH7110 PCIe dt-binding documents.

[Minda Chen]

On 2023/4/7 2:24, Krzysztof Kozlowski wrote:
> On 06/04/2023 13:11, Minda Chen wrote:
>> Add PCIe controller driver dt-binding documents
>> for StarFive JH7110 SoC platform.
> 
> Use subject prefixes matching the subsystem (which you can get for
> example with `git log --oneline -- DIRECTORY_OR_FILE` on the directory
> your patch is touching). Missing: 's'
> 
> Subject: drop second/last, redundant "dt-binding documents". The
> "dt-bindings" prefix is already stating that these are bindings and
> documentation.
> 
> Drop also full stop.
> 
ok, thanks
>> 
>> Signed-off-by: Minda Chen <minda.chen at starfivetech.com>
>> ---
>>  .../bindings/pci/starfive,jh7110-pcie.yaml    | 163 ++++++++++++++++++
>>  1 file changed, 163 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
>> 
>> diff --git a/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
>> new file mode 100644
>> index 000000000000..fa4829766195
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pci/starfive,jh7110-pcie.yaml
>> @@ -0,0 +1,163 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pci/starfive,jh7110-pcie.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: StarFive JH7110 PCIe 2.0 host controller
>> +
>> +maintainers:
>> +  - Minda Chen <minda.chen at starfivetech.com>
>> +
>> +allOf:
>> +  - $ref: /schemas/pci/pci-bus.yaml#
>> +  - $ref: /schemas/interrupt-controller/msi-controller.yaml#
>> +
>> +properties:
>> +  compatible:
>> +    const: starfive,jh7110-pcie
>> +
>> +  reg:
>> +    maxItems: 2
>> +
>> +  reg-names:
>> +    items:
>> +      - const: reg
>> +      - const: config
>> +
>> +  msi-parent: true
>> +
>> +  interrupts:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    maxItems: 4
>> +
>> +  clock-names:
>> +    items:
>> +      - const: noc
>> +      - const: tl
>> +      - const: axi_mst0
>> +      - const: apb
>> +
>> +  resets:
>> +    items:
>> +      - description: AXI MST0 reset
>> +      - description: AXI SLAVE reset
>> +      - description: AXI SLAVE0 reset
>> +      - description: PCIE BRIDGE reset
>> +      - description: PCIE CORE reset
>> +      - description: PCIE APB reset
>> +
>> +  reset-names:
>> +    items:
>> +      - const: mst0
>> +      - const: slv0
>> +      - const: slv
>> +      - const: brg
>> +      - const: core
>> +      - const: apb
>> +
>> +  starfive,stg-syscon:
>> +    $ref: /schemas/types.yaml#/definitions/phandle-array
>> +    items:
>> +      items:
>> +        - description: phandle to System Register Controller stg_syscon node.
>> +        - description: register0 offset of STG_SYSCONSAIF__SYSCFG register for PCIe.
>> +        - description: register1 offset of STG_SYSCONSAIF__SYSCFG register for PCIe.
>> +        - description: register2 offset of STG_SYSCONSAIF__SYSCFG register for PCIe.
>> +        - description: register3 offset of STG_SYSCONSAIF__SYSCFG register for PCIe.
>> +    description:
>> +      The phandle to System Register Controller syscon node and the offset
>> +      of STG_SYSCONSAIF__SYSCFG register for PCIe. Total 4 regsisters offset
>> +      for PCIe.
>> +
>> +  pwren-gpios:
>> +    description: Should specify the GPIO for controlling the PCI bus device power on.
> 
> What are these? Different than defined in gpio-consumer-common?
> 
power gpio board level configuration. It it not a requried property
>> +    maxItems: 1
>> +
>> +  reset-gpios:
>> +    maxItems: 1
>> +
>> +  phys:
>> +    maxItems: 1
>> +
>> +  interrupt-controller:
>> +    type: object
>> +    properties:
>> +      '#address-cells':
>> +        const: 0
>> +
>> +      '#interrupt-cells':
>> +        const: 1
>> +
>> +      interrupt-controller: true
>> +
>> +    required:
>> +      - '#address-cells'
>> +      - '#interrupt-cells'
>> +      - interrupt-controller
>> +
>> +    additionalProperties: false
>> +
>> +required:
>> +  - reg
>> +  - reg-names
>> +  - "#interrupt-cells"
> 
> Keep consistent quotes - either ' or "
> 
> Are you sure this is correct? You have interrupt controller as child node.
> 
> 
>> +  - interrupts
>> +  - interrupt-map-mask
>> +  - interrupt-map
>> +  - clocks
>> +  - clock-names
>> +  - resets
>> +  - msi-controller
>> +
>> +unevaluatedProperties: false
>> +
>> +examples:
>> +  - |
>> +    bus {
>> +        #address-cells = <2>;
>> +        #size-cells = <2>;
>> +
>> +        pcie0: pcie at 2B000000 {
> 
> Lowercase hex. Everywhere.
> 
ok
>> +            compatible = "starfive,jh7110-pcie";
>> +            #address-cells = <3>;
>> +            #size-cells = <2>;
>> +            #interrupt-cells = <1>;
>> +            reg = <0x0 0x2B000000 0x0 0x1000000>,
>> +                  <0x9 0x40000000 0x0 0x10000000>;
> 
> reg (and reg-names and ranges) is always second property.
> 
ok
>> +            reg-names = "reg", "config";
>> +            device_type = "pci";
>> +            starfive,stg-syscon = <&stg_syscon 0xc0 0xc4 0x130 0x1b8>;
>> +            bus-range = <0x0 0xff>;
>> +            ranges = <0x82000000  0x0 0x30000000  0x0 0x30000000 0x0 0x08000000>,
>> +                     <0xc3000000  0x9 0x00000000  0x9 0x00000000 0x0 0x40000000>;
>> +            interrupt-parent = <&plic>;
>> +            interrupts = <56>;
>> +            interrupt-map-mask = <0x0 0x0 0x0 0x7>;
>> +            interrupt-map = <0x0 0x0 0x0 0x1 &pcie_intc0 0x1>,
>> +                            <0x0 0x0 0x0 0x2 &pcie_intc0 0x2>,
>> +                            <0x0 0x0 0x0 0x3 &pcie_intc0 0x3>,
>> +                            <0x0 0x0 0x0 0x4 &pcie_intc0 0x4>;
> 
> 
> Best regards,
> Krzysztof
>