[PATCH v2 02/10] ARM: dts: sun6i: a31: Switch dma-names order for snps,dw-apb-uart nodes

[Jernej Škrabec]

Dne torek, 21. marec 2023 ob 22:56:16 CEST je Cristian Ciocaltea napisal(a):
> Commit 370f696e4474 ("dt-bindings: serial: snps-dw-apb-uart: add dma &
> dma-names properties") documented dma-names property to handle Allwinner
> D1 dtbs_check warnings, but relies on the rx->tx ordering, which is the
> reverse of what a bunch of different boards expect.
> 
> The initial proposed solution was to allow a flexible dma-names order in
> the binding, due to potential ABI breakage concerns after fixing the DTS
> files. But luckily the Allwinner boards are not affected, since they are
> using a shared DMA channel for rx and tx.
> 
> Hence, the first step in fixing the inconsistency was to change
> dma-names order in the binding to tx->rx.
> 
> Do the same for the snps,dw-apb-uart nodes in the DTS file.
> 
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea at collabora.com>

Acked-by: Jernej Skrabec <jernej.skrabec at gmail.com>

Best regards,
Jernej

> ---
>  arch/arm/boot/dts/sun6i-a31.dtsi | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi
> b/arch/arm/boot/dts/sun6i-a31.dtsi index 6cdadba6a3ac..5cce4918f84c 100644
> --- a/arch/arm/boot/dts/sun6i-a31.dtsi
> +++ b/arch/arm/boot/dts/sun6i-a31.dtsi
> @@ -822,7 +822,7 @@ uart0: serial at 1c28000 {
>  			clocks = <&ccu CLK_APB2_UART0>;
>  			resets = <&ccu RST_APB2_UART0>;
>  			dmas = <&dma 6>, <&dma 6>;
> -			dma-names = "rx", "tx";
> +			dma-names = "tx", "rx";
>  			status = "disabled";
>  		};
> 
> @@ -835,7 +835,7 @@ uart1: serial at 1c28400 {
>  			clocks = <&ccu CLK_APB2_UART1>;
>  			resets = <&ccu RST_APB2_UART1>;
>  			dmas = <&dma 7>, <&dma 7>;
> -			dma-names = "rx", "tx";
> +			dma-names = "tx", "rx";
>  			status = "disabled";
>  		};
> 
> @@ -848,7 +848,7 @@ uart2: serial at 1c28800 {
>  			clocks = <&ccu CLK_APB2_UART2>;
>  			resets = <&ccu RST_APB2_UART2>;
>  			dmas = <&dma 8>, <&dma 8>;
> -			dma-names = "rx", "tx";
> +			dma-names = "tx", "rx";
>  			status = "disabled";
>  		};
> 
> @@ -861,7 +861,7 @@ uart3: serial at 1c28c00 {
>  			clocks = <&ccu CLK_APB2_UART3>;
>  			resets = <&ccu RST_APB2_UART3>;
>  			dmas = <&dma 9>, <&dma 9>;
> -			dma-names = "rx", "tx";
> +			dma-names = "tx", "rx";
>  			status = "disabled";
>  		};
> 
> @@ -874,7 +874,7 @@ uart4: serial at 1c29000 {
>  			clocks = <&ccu CLK_APB2_UART4>;
>  			resets = <&ccu RST_APB2_UART4>;
>  			dmas = <&dma 10>, <&dma 10>;
> -			dma-names = "rx", "tx";
> +			dma-names = "tx", "rx";
>  			status = "disabled";
>  		};
> 
> @@ -887,7 +887,7 @@ uart5: serial at 1c29400 {
>  			clocks = <&ccu CLK_APB2_UART5>;
>  			resets = <&ccu RST_APB2_UART5>;
>  			dmas = <&dma 22>, <&dma 22>;
> -			dma-names = "rx", "tx";
> +			dma-names = "tx", "rx";
>  			status = "disabled";
>  		};