[PATCH v2 0/9] riscv: add Bouffalolab bl808 support

[Jisheng Zhang]

This series adds Bouffalolab uart driver and basic devicetrees for
Bouffalolab bl808 SoC and Sipeed M1s dock board.

It's too late for v6.2-rc1, but I hope I can catch up the v6.3-rc1
window.

I think I have addressed all review comments to v1, correct me if I
missed anything.

PS: this series assumes the "thead,c906" riscv cpu binding patch is
merged(I see Conor has picked up it).

Since v1:
  - use FIELD_PREP and FIELD_GET macro
  - rewrite bflb_uart_tx_chars()
  - add vendor prefix for bouffalolab
  - add dt binding for bl808 compatibles
  - enable SOC_BOUFFALOLAB in defconfig
  - collect Reviewed-by tag
  - modify commit-msg as suggested

Jisheng Zhang (9):
  dt-bindings: serial: add documentation for Bouffalolab UART Driver
  serial: bflb_uart: add Bouffalolab UART Driver
  riscv: add the Bouffalolab SoC family Kconfig option
  dt-bindings: vendor-prefixes: add bouffalolab
  dt-bindings: riscv: Add bouffalolab bl808 board compatibles
  riscv: dts: bouffalolab: add the bl808 SoC base device tree
  riscv: dts: bouffalolab: add Sipeed M1s SoM and Dock devicetree
  MAINTAINERS: riscv: add entry for Bouffalolab SoC
  riscv: defconfig: enable BOUFFALOLAB SoC

 .../bindings/riscv/bouffalolab.yaml           |  34 +
 .../bindings/serial/bouffalolab,uart.yaml     |  47 ++
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 MAINTAINERS                                   |   9 +
 arch/riscv/Kconfig.socs                       |   6 +
 arch/riscv/boot/dts/Makefile                  |   1 +
 arch/riscv/boot/dts/bouffalolab/Makefile      |   2 +
 .../dts/bouffalolab/bl808-sipeed-m1s-dock.dts |  25 +
 .../dts/bouffalolab/bl808-sipeed-m1s.dtsi     |  21 +
 arch/riscv/boot/dts/bouffalolab/bl808.dtsi    |  74 +++
 arch/riscv/configs/defconfig                  |   1 +
 drivers/tty/serial/Kconfig                    |  18 +
 drivers/tty/serial/Makefile                   |   1 +
 drivers/tty/serial/bflb_uart.c                | 610 ++++++++++++++++++
 include/uapi/linux/serial_core.h              |   3 +
 15 files changed, 854 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/riscv/bouffalolab.yaml
 create mode 100644 Documentation/devicetree/bindings/serial/bouffalolab,uart.yaml
 create mode 100644 arch/riscv/boot/dts/bouffalolab/Makefile
 create mode 100644 arch/riscv/boot/dts/bouffalolab/bl808-sipeed-m1s-dock.dts
 create mode 100644 arch/riscv/boot/dts/bouffalolab/bl808-sipeed-m1s.dtsi
 create mode 100644 arch/riscv/boot/dts/bouffalolab/bl808.dtsi
 create mode 100644 drivers/tty/serial/bflb_uart.c

-- 
2.38.1