[PATCH v2 11/14] clk: starfive: Add StarFive JH7110 system clock driver
Hal Feng
hal.feng at starfivetech.com
Thu Nov 24 18:33:47 PST 2022
On Sat, 19 Nov 2022 01:03:54 +0800, Emil Renner Berthing wrote:
> On Fri, 18 Nov 2022 at 02:06, Hal Feng <hal.feng at starfivetech.com> wrote:
>> diff --git a/drivers/clk/starfive/clk-starfive-jh7110-sys.c b/drivers/clk/starfive/clk-starfive-jh7110-sys.c
>> new file mode 100644
>> index 000000000000..3c1afd691210
>> --- /dev/null
>> +++ b/drivers/clk/starfive/clk-starfive-jh7110-sys.c
>> @@ -0,0 +1,650 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * StarFive JH7110 System Clock Driver
>> + *
>> + * Copyright (C) 2022 Emil Renner Berthing <kernel at esmil.dk>
>> + * Copyright (C) 2022 StarFive Technology Co., Ltd.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/clk-provider.h>
>> +#include <linux/init.h>
>> +#include <linux/io.h>
>> +#include <linux/platform_device.h>
>> +
>> +#include <dt-bindings/clock/starfive-jh7110.h>
>> +
>> +#include "clk-starfive-jh71x0.h"
>> +
>> +/* external clocks */
>> +#define JH7110_SYSCLK_OSC (JH7110_SYSCLK_END + 0)
>> +#define JH7110_SYSCLK_GMAC1_RMII_REFIN (JH7110_SYSCLK_END + 1)
>> +#define JH7110_SYSCLK_GMAC1_RGMII_RXIN (JH7110_SYSCLK_END + 2)
>> +#define JH7110_SYSCLK_I2STX_BCLK_EXT (JH7110_SYSCLK_END + 3)
>> +#define JH7110_SYSCLK_I2STX_LRCK_EXT (JH7110_SYSCLK_END + 4)
>> +#define JH7110_SYSCLK_I2SRX_BCLK_EXT (JH7110_SYSCLK_END + 5)
>> +#define JH7110_SYSCLK_I2SRX_LRCK_EXT (JH7110_SYSCLK_END + 6)
>> +#define JH7110_SYSCLK_TDM_EXT (JH7110_SYSCLK_END + 7)
>> +#define JH7110_SYSCLK_MCLK_EXT (JH7110_SYSCLK_END + 8)
>> +
>> +static const struct jh71x0_clk_data jh7110_sysclk_data[] __initconst = {
>> + /* root */
>> + JH71X0__MUX(JH7110_SYSCLK_CPU_ROOT, "cpu_root", 2,
>> + JH7110_SYSCLK_OSC,
>> + JH7110_SYSCLK_PLL0_OUT),
>> + JH71X0__DIV(JH7110_SYSCLK_CPU_CORE, "cpu_core", 7,
>> + JH7110_SYSCLK_CPU_ROOT),
>> + JH71X0__DIV(JH7110_SYSCLK_CPU_BUS, "cpu_bus", 2,
>> + JH7110_SYSCLK_CPU_CORE),
>> + JH71X0__MUX(JH7110_SYSCLK_GPU_ROOT, "gpu_root", 2,
>> + JH7110_SYSCLK_PLL2_OUT,
>> + JH7110_SYSCLK_PLL1_OUT),
>> + JH71X0_MDIV(JH7110_SYSCLK_PERH_ROOT, "perh_root", 2, 2,
>> + JH7110_SYSCLK_PLL0_OUT,
>> + JH7110_SYSCLK_PLL2_OUT),
>> + JH71X0__MUX(JH7110_SYSCLK_BUS_ROOT, "bus_root", 2,
>> + JH7110_SYSCLK_OSC,
>> + JH7110_SYSCLK_PLL2_OUT),
>> + JH71X0__DIV(JH7110_SYSCLK_NOCSTG_BUS, "nocstg_bus", 3,
>> + JH7110_SYSCLK_BUS_ROOT),
>> + JH71X0__DIV(JH7110_SYSCLK_AXI_CFG0, "axi_cfg0", 3,
>> + JH7110_SYSCLK_BUS_ROOT),
>> + JH71X0__DIV(JH7110_SYSCLK_STG_AXIAHB, "stg_axiahb", 2,
>> + JH7110_SYSCLK_AXI_CFG0),
>> + JH71X0_GATE(JH7110_SYSCLK_AHB0, "ahb0", CLK_IS_CRITICAL,
>> + JH7110_SYSCLK_STG_AXIAHB),
>> + JH71X0_GATE(JH7110_SYSCLK_AHB1, "ahb1", CLK_IS_CRITICAL,
>> + JH7110_SYSCLK_STG_AXIAHB),
>> + JH71X0__DIV(JH7110_SYSCLK_APB_BUS_FUNC, "apb_bus_func", 8,
>> + JH7110_SYSCLK_STG_AXIAHB),
>> + JH71X0_GATE(JH7110_SYSCLK_APB0, "apb0", CLK_IS_CRITICAL,
>> + JH7110_SYSCLK_APB_BUS),
>> + JH71X0__DIV(JH7110_SYSCLK_PLL0_DIV2, "pll0_div2", 2,
>> + JH7110_SYSCLK_PLL0_OUT),
>> + JH71X0__DIV(JH7110_SYSCLK_PLL1_DIV2, "pll1_div2", 2,
>> + JH7110_SYSCLK_PLL1_OUT),
>> + JH71X0__DIV(JH7110_SYSCLK_PLL2_DIV2, "pll2_div2", 2,
>> + JH7110_SYSCLK_PLL2_OUT),
>> + JH71X0__DIV(JH7110_SYSCLK_AUDIO_ROOT, "audio_root", 8,
>> + JH7110_SYSCLK_PLL2_OUT),
>> + JH71X0__DIV(JH7110_SYSCLK_MCLK_INNER, "mclk_inner", 64,
>> + JH7110_SYSCLK_AUDIO_ROOT),
>> + JH71X0__MUX(JH7110_SYSCLK_MCLK, "mclk", 2,
>> + JH7110_SYSCLK_MCLK_INNER,
>> + JH7110_SYSCLK_MCLK_EXT),
>> + JH71X0_GATE(JH7110_SYSCLK_MCLK_OUT, "mclk_out", 0,
>> + JH7110_SYSCLK_MCLK_INNER),
>> + JH71X0_MDIV(JH7110_SYSCLK_ISP_2X, "isp_2x", 8, 2,
>> + JH7110_SYSCLK_PLL2_OUT,
>> + JH7110_SYSCLK_PLL1_OUT),
>> + JH71X0__DIV(JH7110_SYSCLK_ISP_AXI, "isp_axi", 4,
>> + JH7110_SYSCLK_ISP_2X),
>> + JH71X0_GDIV(JH7110_SYSCLK_GCLK0, "gclk0", 0, 62,
>> + JH7110_SYSCLK_PLL0_DIV2),
>> + JH71X0_GDIV(JH7110_SYSCLK_GCLK1, "gclk1", 0, 62,
>> + JH7110_SYSCLK_PLL1_DIV2),
>> + JH71X0_GDIV(JH7110_SYSCLK_GCLK2, "gclk2", 0, 62,
>> + JH7110_SYSCLK_PLL2_DIV2),
>> + /* cores */
>> + JH71X0_GATE(JH7110_SYSCLK_CORE, "core_clk", CLK_IGNORE_UNUSED,
>> + JH7110_SYSCLK_CPU_CORE),
>> + JH71X0_GATE(JH7110_SYSCLK_CORE1, "core_clk1", CLK_IGNORE_UNUSED,
>> + JH7110_SYSCLK_CPU_CORE),
>> + JH71X0_GATE(JH7110_SYSCLK_CORE2, "core_clk2", CLK_IGNORE_UNUSED,
>> + JH7110_SYSCLK_CPU_CORE),
>> + JH71X0_GATE(JH7110_SYSCLK_CORE3, "core_clk3", CLK_IGNORE_UNUSED,
>> + JH7110_SYSCLK_CPU_CORE),
>> + JH71X0_GATE(JH7110_SYSCLK_CORE4, "core_clk4", CLK_IGNORE_UNUSED,
>> + JH7110_SYSCLK_CPU_CORE),
>> + JH71X0_GATE(JH7110_SYSCLK_DEBUG, "debug_clk", CLK_IGNORE_UNUSED,
>> + JH7110_SYSCLK_CPU_BUS),
>> + JH71X0__DIV(JH7110_SYSCLK_RTC_TOGGLE, "rtc_toggle", 6,
>> + JH7110_SYSCLK_OSC),
>> + JH71X0_GATE(JH7110_SYSCLK_TRACE0, "trace_clk0", CLK_IGNORE_UNUSED,
>> + JH7110_SYSCLK_CPU_CORE),
>> + JH71X0_GATE(JH7110_SYSCLK_TRACE1, "trace_clk1", CLK_IGNORE_UNUSED,
>> + JH7110_SYSCLK_CPU_CORE),
>> + JH71X0_GATE(JH7110_SYSCLK_TRACE2, "trace_clk2", CLK_IGNORE_UNUSED,
>> + JH7110_SYSCLK_CPU_CORE),
>> + JH71X0_GATE(JH7110_SYSCLK_TRACE3, "trace_clk3", CLK_IGNORE_UNUSED,
>> + JH7110_SYSCLK_CPU_CORE),
>> + JH71X0_GATE(JH7110_SYSCLK_TRACE4, "trace_clk4", CLK_IGNORE_UNUSED,
>> + JH7110_SYSCLK_CPU_CORE),
>> + JH71X0_GATE(JH7110_SYSCLK_TRACE_COM, "trace_com", CLK_IGNORE_UNUSED,
>> + JH7110_SYSCLK_CPU_BUS),
>
> Why should these clocks not be turned off if they're not critical like
> the clocks above?
>
> My guess would be that the clocks for core 1-4 are critical, but maybe
> not the trace and debug clocks.
I synchronized these flags before with StarFive JH7110 SDK which is not
released yet. But you're right, the core clocks should be enabled and the
debug/trace clocks could be disabled during system booting. After some
discussion, we think it's more appropriate to remove the flags of
trace/debug clocks and set the flags of core clocks as CLK_IS_CRITICAL.
>
[...]
>> +};
>> +
>> +static const struct {
>> + const char *name;
>> + const char *parent;
>> + unsigned int mul;
>> + unsigned int div;
>> +} jh7110_fixed_factor_clocks[JH7110_SYSCLK_END - JH7110_SYSCLK_PLL0_OUT] __initconst = {
>> + [JH7110_SYSCLK_PLL0_OUT - JH7110_SYSCLK_PLL0_OUT] = {
>> + "pll0_out", "osc", 625, 12 /* 24MHz -> 1250.0MHz */
>> + },
>> + [JH7110_SYSCLK_PLL1_OUT - JH7110_SYSCLK_PLL0_OUT] = {
>> + "pll1_out", "osc", 533, 12 /* 24MHz -> 1066.0MHz */
>> + },
>> + [JH7110_SYSCLK_PLL2_OUT - JH7110_SYSCLK_PLL0_OUT] = {
>> + "pll2_out", "osc", 99, 2 /* 24MHz -> 1188.0MHz */
>> + },
>> + [JH7110_SYSCLK_PCLK2_MUX_FUNC - JH7110_SYSCLK_PLL0_OUT] = {
>> + "pclk2_mux_func", "apb_bus_func", 1, 1
>> + },
>> + [JH7110_SYSCLK_PCLK2_MUX - JH7110_SYSCLK_PLL0_OUT] = {
>> + "pclk2_mux", "pclk2_mux_func", 1, 1
>> + },
>> + [JH7110_SYSCLK_APB_BUS - JH7110_SYSCLK_PLL0_OUT] = {
>> + "apb_bus", "pclk2_mux", 1, 1
>> + },
>> + [JH7110_SYSCLK_AXI_CFG1 - JH7110_SYSCLK_PLL0_OUT] = {
>> + "axi_cfg1", "isp_axi", 1, 1
>> + },
>> + [JH7110_SYSCLK_APB12 - JH7110_SYSCLK_PLL0_OUT] = {
>> + "apb12", "apb_bus", 1, 1
>> + },
>> + [JH7110_SYSCLK_VOUT_ROOT - JH7110_SYSCLK_PLL0_OUT] = {
>> + "vout_root", "pll2_out", 1, 1
>> + },
>> + [JH7110_SYSCLK_VENC_ROOT - JH7110_SYSCLK_PLL0_OUT] = {
>> + "venc_root", "pll2_out", 1, 1
>> + },
>> + [JH7110_SYSCLK_VDEC_ROOT - JH7110_SYSCLK_PLL0_OUT] = {
>> + "vdec_root", "pll0_out", 1, 1
>> + },
>> + [JH7110_SYSCLK_GMACUSB_ROOT - JH7110_SYSCLK_PLL0_OUT] = {
>> + "gmacusb_root", "pll0_out", 1, 1
>> + },
>> +};
>
> Having these extra 1-1 clocks that can't be controlled anyway seems unnecessary.
> Consider sync'ing with my latest jh7110 branch at
> https://github.com/esmil/linux/tree/jh7110
Thanks. I'll have a look.
>> diff --git a/drivers/clk/starfive/clk-starfive-jh71x0.h b/drivers/clk/starfive/clk-starfive-jh71x0.h
>> index baf4b5cb4b8a..7a52e46eb6db 100644
>> --- a/drivers/clk/starfive/clk-starfive-jh71x0.h
>> +++ b/drivers/clk/starfive/clk-starfive-jh71x0.h
>> @@ -105,10 +105,18 @@ struct jh71x0_clk_priv {
>> spinlock_t rmw_lock;
>> struct device *dev;
>> void __iomem *base;
>> - struct clk_hw *pll[3];
>> + struct clk_hw *pll[12];
>> struct jh71x0_clk reg[];
>> };
>>
>> const struct clk_ops *starfive_jh71x0_clk_ops(u32 max);
>>
>> +#if IS_ENABLED(CONFIG_CLK_STARFIVE_JH7110_SYS)
>
> The function below is used both in the syscrg driver and the aoncrg
> driver, so why guard it like this?
Because the aoncrg driver depends on the syscrg driver, which is set
in Kconfig.
Best regards,
Hal
>
>> +int jh7110_reset_controller_register(struct jh71x0_clk_priv *priv,
>> + const char *adev_name,
>> + u32 adev_id);
>> +
>> +#endif
>> +
>> #endif
More information about the linux-riscv
mailing list