[RFC 6/9] RISC-V: KVM: Add SBI PMU extension support

[Atish Patra]

On Tue, Nov 1, 2022 at 7:26 AM Andrew Jones <ajones at ventanamicro.com> wrote:
>
> On Mon, Jul 18, 2022 at 10:02:02AM -0700, Atish Patra wrote:
> > SBI PMU extension allows KVM guests to configure/start/stop/query about
> > the PMU counters in virtualized enviornment as well.
> >
> > In order to allow that, KVM implements the entire SBI PMU extension.
> >
> > Signed-off-by: Atish Patra <atishp at rivosinc.com>
> > ---
> >  arch/riscv/kvm/vcpu_sbi.c     | 11 +++++
> >  arch/riscv/kvm/vcpu_sbi_pmu.c | 81 +++++++++++++++++++++++++++++++++++
> >  2 files changed, 92 insertions(+)
> >  create mode 100644 arch/riscv/kvm/vcpu_sbi_pmu.c
> >
> > diff --git a/arch/riscv/kvm/vcpu_sbi.c b/arch/riscv/kvm/vcpu_sbi.c
> > index d45e7da3f0d3..da9f7959340e 100644
> > --- a/arch/riscv/kvm/vcpu_sbi.c
> > +++ b/arch/riscv/kvm/vcpu_sbi.c
> > @@ -50,6 +50,16 @@ extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_hsm;
> >  extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_experimental;
> >  extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_vendor;
> >
> > +#ifdef CONFIG_RISCV_PMU_SBI
> > +extern const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_pmu;
> > +#else
> > +static const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_pmu = {
> > +     .extid_start = -1UL,
> > +     .extid_end = -1UL,
> > +     .handler = NULL,
> > +};
> > +#endif
> > +
> >  static const struct kvm_vcpu_sbi_extension *sbi_ext[] = {
> >       &vcpu_sbi_ext_v01,
> >       &vcpu_sbi_ext_base,
> > @@ -58,6 +68,7 @@ static const struct kvm_vcpu_sbi_extension *sbi_ext[] = {
> >       &vcpu_sbi_ext_rfence,
> >       &vcpu_sbi_ext_srst,
> >       &vcpu_sbi_ext_hsm,
> > +     &vcpu_sbi_ext_pmu,
> >       &vcpu_sbi_ext_experimental,
> >       &vcpu_sbi_ext_vendor,
> >  };
> > diff --git a/arch/riscv/kvm/vcpu_sbi_pmu.c b/arch/riscv/kvm/vcpu_sbi_pmu.c
> > new file mode 100644
> > index 000000000000..90c51a95d4f4
> > --- /dev/null
> > +++ b/arch/riscv/kvm/vcpu_sbi_pmu.c
> > @@ -0,0 +1,81 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +/*
> > + * Copyright (c) 2022 Rivos Inc
> > + *
> > + * Authors:
> > + *     Atish Patra <atishp at rivosinc.com>
> > + */
> > +
> > +#include <linux/errno.h>
> > +#include <linux/err.h>
> > +#include <linux/kvm_host.h>
> > +#include <asm/csr.h>
> > +#include <asm/sbi.h>
> > +#include <asm/kvm_vcpu_sbi.h>
> > +
> > +static int kvm_sbi_ext_pmu_handler(struct kvm_vcpu *vcpu, struct kvm_run *run,
> > +                                unsigned long *out_val,
> > +                                struct kvm_cpu_trap *utrap,
> > +                                bool *exit)
> > +{
> > +     int ret = -EOPNOTSUPP;
> > +     struct kvm_cpu_context *cp = &vcpu->arch.guest_context;
> > +     unsigned long funcid = cp->a6;
> > +     uint64_t temp;
>
> I think we need something like
>
>    if (!vcpu_to_pmu(vcpu)->enabled)
>       return -EOPNOTSUPP;
>
> here. Where 'enabled' is only true when we successfully initialize
> the pmu. And, successful initialization depends on

Yes. I have added the flag. But should we do the check here or
respective function
as a paranoia sanity check ?

> IS_ENABLED(CONFIG_RISCV_PMU_SBI) and

Why do we need to guard under CONFIG_RISCV_PMU_SBI ?
vcpu_sbi_pmu.c is only compiled under CONFIG_RISCV_PMU_SBI

If CONFIG_RISCV_PMU_SBI is not enabled, probe function will return failure.

In fact, I think we should also add the pmu enabled check in the probe function
itself. Probe function(kvm_sbi_ext_pmu_probe) should only true when
both vcpu_to_pmu(vcpu)->enabled and
riscv_isa_extension_available(NULL, SSCOFPMF) are true.

Thoughts?

> riscv_isa_extension_available(NULL, SSCOFPMF) as well as not
> failing other things. And, KVM userspace should be able to
> disable the pmu, which keep enabled from being set as well.
>
We already have provisions for disabling sscofpmf from guests via ISA
one reg interface.
Do you mean disable the entire PMU from userspace ?

Currently, ARM64 enables pmu from user space using device control APIs
on vcpu fd.
Are you suggesting we should do something like that ?

If PMU needs to have device control APIs (either via vcpu fd or its
own), we can retrieve
the hpmcounter width and count from there as well.

> > +
> > +     switch (funcid) {
> > +     case SBI_EXT_PMU_NUM_COUNTERS:
> > +             ret = kvm_riscv_vcpu_pmu_num_ctrs(vcpu, out_val);
> > +             break;
> > +     case SBI_EXT_PMU_COUNTER_GET_INFO:
> > +             ret = kvm_riscv_vcpu_pmu_ctr_info(vcpu, cp->a0, out_val);
> > +             break;
> > +     case SBI_EXT_PMU_COUNTER_CFG_MATCH:
> > +#if defined(CONFIG_32BIT)
> > +             temp = ((uint64_t)cp->a5 << 32) | cp->a4;
> > +#else
> > +             temp = cp->a4;
> > +#endif
> > +             ret = kvm_riscv_vcpu_pmu_ctr_cfg_match(vcpu, cp->a0, cp->a1, cp->a2, cp->a3, temp);
> > +             if (ret >= 0) {
> > +                     *out_val = ret;
> > +                     ret = 0;
> > +             }
> > +             break;
> > +     case SBI_EXT_PMU_COUNTER_START:
> > +#if defined(CONFIG_32BIT)
> > +             temp = ((uint64_t)cp->a4 << 32) | cp->a3;
> > +#else
> > +             temp = cp->a3;
> > +#endif
> > +             ret = kvm_riscv_vcpu_pmu_ctr_start(vcpu, cp->a0, cp->a1, cp->a2, temp);
> > +             break;
> > +     case SBI_EXT_PMU_COUNTER_STOP:
> > +             ret = kvm_riscv_vcpu_pmu_ctr_stop(vcpu, cp->a0, cp->a1, cp->a2);
> > +             break;
> > +     case SBI_EXT_PMU_COUNTER_FW_READ:
> > +             ret = kvm_riscv_vcpu_pmu_ctr_read(vcpu, cp->a0, out_val);
> > +             break;
> > +     default:
> > +             ret = -EOPNOTSUPP;
> > +     }
> > +
> > +     return ret;
> > +}
> > +
> > +unsigned long kvm_sbi_ext_pmu_probe(unsigned long extid)
> > +{
> > +     /*
> > +      * PMU Extension is only available to guests if privilege mode filtering
> > +      * is available. Otherwise, guest will always count events while the
> > +      * execution is in hypervisor mode.
> > +      */
> > +     return riscv_isa_extension_available(NULL, SSCOFPMF);
> > +}
> > +
> > +const struct kvm_vcpu_sbi_extension vcpu_sbi_ext_pmu = {
> > +     .extid_start = SBI_EXT_PMU,
> > +     .extid_end = SBI_EXT_PMU,
> > +     .handler = kvm_sbi_ext_pmu_handler,
> > +     .probe = kvm_sbi_ext_pmu_probe,
> > +};
> > --
> > 2.25.1
> >
>
> Thanks,
> drew



-- 
Regards,
Atish