[PATCH] irqchip/sifive-plic: drop quirk for two-cell variant
Icenowy Zheng
uwu at icenowy.me
Sun Nov 20 20:20:26 PST 2022
As the special handling of edge-triggered interrupts are defined in the
PLIC spec, we can assume it's not a quirk, but a feature of the PLIC
spec; thus making it a quirk and use quirk-based codepath is not so
necessary.
Move to a #interrupt-cells-based practice which will allow both device
trees without interrupt flags and with interrupt flags work for all
compatible strings.
In addition, this addresses a stable version DT binding violation --
Linux v5.19 comes with "thead,c900-plic" with #interrupt-cells defined to
be 1 instead of 2, this commit will allow DTs that complies to Linux
v5.19 binding work (although no such DT is devliered to the public now).
Signed-off-by: Icenowy Zheng <uwu at icenowy.me>
---
drivers/irqchip/irq-sifive-plic.c | 20 +++++++++-----------
1 file changed, 9 insertions(+), 11 deletions(-)
diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
index 2f4784860df5..219e4f1b62f0 100644
--- a/drivers/irqchip/irq-sifive-plic.c
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -67,6 +67,7 @@ struct plic_priv {
struct irq_domain *irqdomain;
void __iomem *regs;
unsigned long plic_quirks;
+ u32 interrupt_cells;
};
struct plic_handler {
@@ -208,7 +209,7 @@ static int plic_irq_set_type(struct irq_data *d, unsigned int type)
{
struct plic_priv *priv = irq_data_get_irq_chip_data(d);
- if (!test_bit(PLIC_QUIRK_EDGE_INTERRUPT, &priv->plic_quirks))
+ if (priv->interrupt_cells < 2)
return IRQ_SET_MASK_OK_NOCOPY;
switch (type) {
@@ -246,7 +247,7 @@ static int plic_irq_domain_translate(struct irq_domain *d,
{
struct plic_priv *priv = d->host_data;
- if (test_bit(PLIC_QUIRK_EDGE_INTERRUPT, &priv->plic_quirks))
+ if (priv->interrupt_cells >= 2)
return irq_domain_translate_twocell(d, fwspec, hwirq, type);
return irq_domain_translate_onecell(d, fwspec, hwirq, type);
@@ -357,6 +358,10 @@ static int __init __plic_init(struct device_node *node,
}
error = -EINVAL;
+ of_property_read_u32(node, "#interrupt-cells", &priv->interrupt_cells);
+ if (WARN_ON(!priv->interrupt_cells))
+ goto out_iounmap;
+
of_property_read_u32(node, "riscv,ndev", &nr_irqs);
if (WARN_ON(!nr_irqs))
goto out_iounmap;
@@ -479,12 +484,5 @@ static int __init plic_init(struct device_node *node,
IRQCHIP_DECLARE(sifive_plic, "sifive,plic-1.0.0", plic_init);
IRQCHIP_DECLARE(riscv_plic0, "riscv,plic0", plic_init); /* for legacy systems */
-
-static int __init plic_edge_init(struct device_node *node,
- struct device_node *parent)
-{
- return __plic_init(node, parent, BIT(PLIC_QUIRK_EDGE_INTERRUPT));
-}
-
-IRQCHIP_DECLARE(andestech_nceplic100, "andestech,nceplic100", plic_edge_init);
-IRQCHIP_DECLARE(thead_c900_plic, "thead,c900-plic", plic_edge_init);
+IRQCHIP_DECLARE(andestech_nceplic100, "andestech,nceplic100", plic_init);
+IRQCHIP_DECLARE(thead_c900_plic, "thead,c900-plic", plic_init);
--
2.37.1
More information about the linux-riscv
mailing list