[PATCH v1 4/4] riscv: dts: starfive: add power controller node

[Emil Renner Berthing]

On Fri, 18 Nov 2022 at 14:35, Walker Chen <walker.chen at starfivetech.com> wrote:
>
> This adds the power controller node for the Starfive JH7110 SoC.
> The pmu needs to be used by other modules such as ISP, VPU, etc.
>
> Signed-off-by: Walker Chen <walker.chen at starfivetech.com>

Hi Walker,

You called the driver jh71xx which suggests it also applies to the
jh7100. Are you missing a node in the jh7100 device tree?

> ---
>  arch/riscv/boot/dts/starfive/jh7110.dtsi | 7 +++++++
>  1 file changed, 7 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> index c22e8f1d2640..fa7b60b82d71 100644
> --- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> @@ -356,6 +356,13 @@
>                         #gpio-cells = <2>;
>                 };
>
> +               pwrc: power-controller at 17030000 {
> +                       compatible = "starfive,jh7110-pmu";
> +                       reg = <0x0 0x17030000 0x0 0x10000>;
> +                       interrupts = <111>;
> +                       #power-domain-cells = <1>;
> +               };
> +
>                 uart0: serial at 10000000 {
>                         compatible = "snps,dw-apb-uart";
>                         reg = <0x0 0x10000000 0x0 0x10000>;
> --
> 2.17.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv