[PATCH v2 00/14] Basic clock and reset support for StarFive JH7110 RISC-V SoC

[Hal Feng]

The original patch series "Basic StarFive JH7110 RISC-V SoC support" [1]
is split into 3 patch series. They respectively add basic clock&reset,
pinctrl and device tree support for StarFive JH7110 SoC. These patch
series are independent, but the Visionfive2 board can boot up successfully
only if all these patches series applied. This one adds basic clock&reset
support. This patch series is pulled out from the patch 7~21 of v1 [1].
You can simply get or review the patches at the link [2].

[1]: https://lore.kernel.org/all/20220929143225.17907-1-hal.feng@linux.starfivetech.com/
[2]: https://github.com/hal-feng/linux/commits/visionfive2-minimal

Changes since v1:
- Rebased on tag v6.1-rc5.
- Rewrote the clock and reset drivers using auxiliary bus framework, so
  patch 8, 9, 15 were dropped and all patches changed a lot. (by Stephen)
- Split Patch 14 into two patches. One is for factoring out the common
  JH71X0 code, the another one is for renaming. (by Stephen)
- Created a subdirectory for StarFive reset drivers.
- Factored out common JH71X0 reset code.
- Renamed the common clock and reset code from "*starfive*" or
  "*STARFIVE*" to "*jh71x0*" or "*JH71X0*".
- Combined JH7110 system and always-on clock DT binding headers in one
  file named "include/dt-bindings/clock/starfive-jh7110.h".
- Renamed clock definitions "JH7110_SYSCLK_PCLK2_MUX_FUNC_PCLK" and
  "JH7110_SYSCLK_U2_PCLK_MUX_PCLK" to "JH7110_SYSCLK_PCLK2_MUX_FUNC" and
  "JH7110_SYSCLK_PCLK2_MUX".
- Rewrote the DT bindings of clock and reset for using auxiliary bus.
- Registered an auxiliary device for reset controller in clock drivers.
- Changed clock names "CODAJ*" and "WAVE*" to "codaj*" and "wave*".
  Changed clock names "u2_pclk_mux_func_pclk" and "u2_pclk_mux_pclk" to
  "pclk2_mux_func" and "pclk2_mux".
- Changed the flags of clock apb0 and noc_bus_isp_axi to CLK_IS_CRITICAL
  as suggested by StarFive SDK group.
- Registered clock gmac0_gtxc as a gate clock instead of a div clock
  as suggested by StarFive SDK group.
- Changed the frequency of clock pll2_out to 1188MHz as suggested by
  StarFive SDK group.
- Fixed the bug that the clock JH7110_AONCLK_GMAC0_GTXCLK was not handled
  in JH7110 always-on clock driver.
- Registered the reset driver as an auxiliary driver.
- Reworded the commit messages.

  v1: https://lore.kernel.org/all/20220929143225.17907-1-hal.feng@linux.starfivetech.com/

Emil Renner Berthing (10):
  clk: starfive: Factor out common JH7100 and JH7110 code
  reset: Create subdirectory for StarFive drivers
  reset: starfive: Factor out common JH71X0 reset code
  reset: starfive: jh71x0: Use 32bit I/O on 32bit registers
  dt-bindings: clock: Add StarFive JH7110 system and always-on clock
    definitions
  dt-bindings: reset: Add StarFive JH7110 system and always-on reset
    definitions
  dt-bindings: clock: Add StarFive JH7110 system clock and reset
    generator
  dt-bindings: clock: Add StarFive JH7110 always-on clock and reset
    generator
  clk: starfive: Add StarFive JH7110 system clock driver
  clk: starfive: Add StarFive JH7110 always-on clock driver

Hal Feng (4):
  clk: starfive: Rename "jh7100" to "jh71x0" for the common code
  reset: starfive: Rename "jh7100" to "jh71x0" for the common code
  reset: starfive: Add StarFive JH7110 reset driver
  clk: starfive: jh71x0: Don't register aux devices if JH7110 reset is
    disabled

 .../clock/starfive,jh7110-aoncrg.yaml         |  76 ++
 .../clock/starfive,jh7110-syscrg.yaml         |  80 ++
 MAINTAINERS                                   |  16 +-
 drivers/clk/starfive/Kconfig                  |  25 +
 drivers/clk/starfive/Makefile                 |   6 +-
 .../clk/starfive/clk-starfive-jh7100-audio.c  |  74 +-
 drivers/clk/starfive/clk-starfive-jh7100.c    | 713 +++++-------------
 drivers/clk/starfive/clk-starfive-jh7100.h    | 112 ---
 .../clk/starfive/clk-starfive-jh7110-aon.c    | 165 ++++
 .../clk/starfive/clk-starfive-jh7110-sys.c    | 650 ++++++++++++++++
 drivers/clk/starfive/clk-starfive-jh71x0.c    | 396 ++++++++++
 drivers/clk/starfive/clk-starfive-jh71x0.h    | 122 +++
 drivers/reset/Kconfig                         |   8 +-
 drivers/reset/Makefile                        |   2 +-
 drivers/reset/reset-starfive-jh7100.c         | 173 -----
 drivers/reset/starfive/Kconfig                |  20 +
 drivers/reset/starfive/Makefile               |   5 +
 .../reset/starfive/reset-starfive-jh7100.c    |  74 ++
 .../reset/starfive/reset-starfive-jh7110.c    |  67 ++
 .../reset/starfive/reset-starfive-jh71x0.c    | 130 ++++
 .../reset/starfive/reset-starfive-jh71x0.h    |  21 +
 include/dt-bindings/clock/starfive-jh7110.h   | 234 ++++++
 include/dt-bindings/reset/starfive-jh7110.h   | 154 ++++
 23 files changed, 2466 insertions(+), 857 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-aoncrg.yaml
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-syscrg.yaml
 delete mode 100644 drivers/clk/starfive/clk-starfive-jh7100.h
 create mode 100644 drivers/clk/starfive/clk-starfive-jh7110-aon.c
 create mode 100644 drivers/clk/starfive/clk-starfive-jh7110-sys.c
 create mode 100644 drivers/clk/starfive/clk-starfive-jh71x0.c
 create mode 100644 drivers/clk/starfive/clk-starfive-jh71x0.h
 delete mode 100644 drivers/reset/reset-starfive-jh7100.c
 create mode 100644 drivers/reset/starfive/Kconfig
 create mode 100644 drivers/reset/starfive/Makefile
 create mode 100644 drivers/reset/starfive/reset-starfive-jh7100.c
 create mode 100644 drivers/reset/starfive/reset-starfive-jh7110.c
 create mode 100644 drivers/reset/starfive/reset-starfive-jh71x0.c
 create mode 100644 drivers/reset/starfive/reset-starfive-jh71x0.h
 create mode 100644 include/dt-bindings/clock/starfive-jh7110.h
 create mode 100644 include/dt-bindings/reset/starfive-jh7110.h


base-commit: 094226ad94f471a9f19e8f8e7140a09c2625abaa
-- 
2.38.1