[External] [PATCH v5 0/2] arm64: support batched/deferred tlb shootdown during page reclamation

Punit Agrawal punit.agrawal at bytedance.com
Fri Nov 11 02:17:09 PST 2022


Yicong Yang <yangyicong at huawei.com> writes:

> From: Yicong Yang <yangyicong at hisilicon.com>
>
> Though ARM64 has the hardware to do tlb shootdown, the hardware
> broadcasting is not free.
> A simplest micro benchmark shows even on snapdragon 888 with only
> 8 cores, the overhead for ptep_clear_flush is huge even for paging
> out one page mapped by only one process:
> 5.36%  a.out    [kernel.kallsyms]  [k] ptep_clear_flush
>
> While pages are mapped by multiple processes or HW has more CPUs,
> the cost should become even higher due to the bad scalability of
> tlb shootdown.
>
> The same benchmark can result in 16.99% CPU consumption on ARM64
> server with around 100 cores according to Yicong's test on patch
> 4/4.
>
> This patchset leverages the existing BATCHED_UNMAP_TLB_FLUSH by
> 1. only send tlbi instructions in the first stage -
> 	arch_tlbbatch_add_mm()
> 2. wait for the completion of tlbi by dsb while doing tlbbatch
> 	sync in arch_tlbbatch_flush()
> Testing on snapdragon shows the overhead of ptep_clear_flush
> is removed by the patchset. The micro benchmark becomes 5% faster
> even for one page mapped by single process on snapdragon 888.
>
> With this support we're possible to do more optimization for memory
> reclamation and migration[*].

I applied the patches on v6.1-rc4 and was able to see the drop in
ptep_clear_flush() in the perf report when running the test program from
Patch 2. The tests were done on a rk3399 based system with benefits
visible when running the tests on either of the clusters. 

So, for the series,

Tested-by: Punit Agrawal <punit.agrawal at bytedance.com>

Thanks,
Punit

[...]




More information about the linux-riscv mailing list