[PATCH v2] i2c: add support for microchip fpga i2c controllers
Conor.Dooley at microchip.com
Conor.Dooley at microchip.com
Wed May 4 01:40:16 PDT 2022
On 21/03/2022 12:58, Conor Dooley wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
>
> Add Microchip CoreI2C i2c controller support. This driver supports the
> "hard" i2c controller on the Microchip PolarFire SoC & the basic feature
> set for "soft" i2c controller implemtations in the FPGA fabric.
>
> Co-developed-by: Daire McNamara <daire.mcnamara at microchip.com>
> Signed-off-by: Daire McNamara <daire.mcnamara at microchip.com>
> Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
> ---
> Changes from v1:
> - Use byte write and read functions
So it turns out that how I made this change, which worked in my
test app, has issues.
I will rework and send a v3.
Thanks,
Conor.
> - Return IRQ_NONE and don't warn if not this drivers interrupt
> - Add a clk_disable_unprepare to avoid leaking a clock in the probe
> ---
> drivers/i2c/busses/Kconfig | 11 +
> drivers/i2c/busses/Makefile | 1 +
> drivers/i2c/busses/i2c-microchip-core.c | 486 ++++++++++++++++++++++++
> 3 files changed, 498 insertions(+)
> create mode 100644 drivers/i2c/busses/i2c-microchip-core.c
>
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index a1bae59208e3..3d4d8e0e9de7 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -781,6 +781,17 @@ config I2C_MESON
> If you say yes to this option, support will be included for the
> I2C interface on the Amlogic Meson family of SoCs.
>
> +config I2C_MICROCHIP_CORE
> + tristate "Microchip FPGA I2C controller"
> + depends on SOC_MICROCHIP_POLARFIRE || COMPILE_TEST
> + depends on OF
> + help
> + If you say yes to this option, support will be included for the
> + I2C interface on Microchip FPGAs.
> +
> + This driver can also be built as a module. If so, the module will be
> + called i2c-microchip-core.
> +
> config I2C_MPC
> tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
> depends on PPC
> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> index 479f60e4ee3d..75869b189e43 100644
> --- a/drivers/i2c/busses/Makefile
> +++ b/drivers/i2c/busses/Makefile
> @@ -78,6 +78,7 @@ obj-$(CONFIG_I2C_JZ4780) += i2c-jz4780.o
> obj-$(CONFIG_I2C_KEMPLD) += i2c-kempld.o
> obj-$(CONFIG_I2C_LPC2K) += i2c-lpc2k.o
> obj-$(CONFIG_I2C_MESON) += i2c-meson.o
> +obj-$(CONFIG_I2C_MICROCHIP_CORE) += i2c-microchip-core.o
> obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
> obj-$(CONFIG_I2C_MT65XX) += i2c-mt65xx.o
> obj-$(CONFIG_I2C_MT7621) += i2c-mt7621.o
> diff --git a/drivers/i2c/busses/i2c-microchip-core.c b/drivers/i2c/busses/i2c-microchip-core.c
> new file mode 100644
> index 000000000000..ea434f39e0cd
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-microchip-core.c
> @@ -0,0 +1,486 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Microchip CoreI2C I2C controller driver
> + *
> + * Copyright (c) 2018 - 2022 Microchip Corporation. All rights reserved.
> + *
> + * Author: Daire McNamara <daire.mcnamara at microchip.com>
> + * Author: Conor Dooley <conor.dooley at microchip.com>
> + */
> +#include <linux/clk.h>
> +#include <linux/clkdev.h>
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/iopoll.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/platform_device.h>
> +
> +#define MICROCHIP_I2C_TIMEOUT (msecs_to_jiffies(1000))
> +
> +#define CORE_I2C_CTRL (0x00)
> +#define CTRL_CR0 BIT(0)
> +#define CTRL_CR1 BIT(1)
> +#define CTRL_AA BIT(2)
> +#define CTRL_SI BIT(3)
> +#define CTRL_STO BIT(4)
> +#define CTRL_STA BIT(5)
> +#define CTRL_ENS1 BIT(6)
> +#define CTRL_CR2 BIT(7)
> +#define CORE_I2C_STATUS (0x04)
> +#define STATUS_BUS_ERROR (0x00)
> +#define STATUS_M_START_SENT (0x08)
> +#define STATUS_M_REPEATED_START_SENT (0x10)
> +#define STATUS_M_SLAW_ACK (0x18)
> +#define STATUS_M_SLAW_NACK (0x20)
> +#define STATUS_M_TX_DATA_ACK (0x28)
> +#define STATUS_M_TX_DATA_NACK (0x30)
> +#define STATUS_M_ARB_LOST (0x38)
> +#define STATUS_M_SLAR_ACK (0x40)
> +#define STATUS_M_SLAR_NACK (0x48)
> +#define STATUS_M_RX_DATA_ACKED (0x50)
> +#define STATUS_M_RX_DATA_NACKED (0x58)
> +#define STATUS_S_SLAW_ACKED (0x60)
> +#define STATUS_S_ARB_LOST_SLAW_ACKED (0x68)
> +#define STATUS_S_GENERAL_CALL_ACKED (0x70)
> +#define STATUS_S_ARB_LOST_GENERAL_CALL_ACKED (0x78)
> +#define STATUS_S_RX_DATA_ACKED (0x80)
> +#define STATUS_S_RX_DATA_NACKED (0x88)
> +#define STATUS_S_GENERAL_CALL_RX_DATA_ACKED (0x90)
> +#define STATUS_S_GENERAL_CALL_RX_DATA_NACKED (0x98)
> +#define STATUS_S_RX_STOP (0xA0)
> +#define STATUS_S_SLAR_ACKED (0xA8)
> +#define STATUS_S_ARB_LOST_SLAR_ACKED (0xB0)
> +#define STATUS_S_TX_DATA_ACK (0xB8)
> +#define STATUS_S_TX_DATA_NACK (0xC0)
> +#define STATUS_LAST_DATA_ACK (0xC8)
> +#define STATUS_M_SMB_MASTER_RESET (0xD0)
> +#define STATUS_S_SCL_LOW_TIMEOUT (0xD8) /* 25 ms */
> +#define STATUS_NO_STATE_INFO (0xF8)
> +#define CORE_I2C_DATA (0x08)
> +#define WRITE_BIT (0x0)
> +#define READ_BIT (0x1)
> +#define SLAVE_ADDR_SHIFT (1)
> +#define CORE_I2C_SLAVE0_ADDR (0x0c)
> +#define GENERAL_CALL_BIT (0x0)
> +#define CORE_I2C_SMBUS (0x10)
> +#define SMBALERT_INT_ENB (0x0)
> +#define SMBSUS_INT_ENB (0x1)
> +#define SMBUS_ENB (0x2)
> +#define SMBALERT_NI_STATUS (0x3)
> +#define SMBALERT_NO_CTRL (0x4)
> +#define SMBSUS_NI_STATUS (0x5)
> +#define SMBSUS_NO_CTRL (0x6)
> +#define SMBUS_RESET (0x7)
> +#define CORE_I2C_FREQ (0x14)
> +#define CORE_I2C_GLITCHREG (0x18)
> +#define CORE_I2C_SLAVE1_ADDR (0x1c)
> +
> +#define PCLK_DIV_960 (CTRL_CR2)
> +#define PCLK_DIV_256 (0)
> +#define PCLK_DIV_224 (CTRL_CR0)
> +#define PCLK_DIV_192 (CTRL_CR1)
> +#define PCLK_DIV_160 (CTRL_CR0 | CTRL_CR1)
> +#define PCLK_DIV_120 (CTRL_CR0 | CTRL_CR2)
> +#define PCLK_DIV_60 (CTRL_CR1 | CTRL_CR2)
> +#define BCLK_DIV_8 (CTRL_CR0 | CTRL_CR1 | CTRL_CR2)
> +#define CLK_MASK (CTRL_CR0 | CTRL_CR1 | CTRL_CR2)
> +
> +/*
> + * mchp_corei2c_dev - I2C device context
> + * @base: pointer to register struct
> + * @msg: pointer to current message
> + * @msg_len: number of bytes transferred in msg
> + * @msg_err: error code for completed message
> + * @msg_complete: xfer completion object
> + * @dev: device reference
> + * @adapter: core i2c abstraction
> + * @i2c_clk: clock reference for i2c input clock
> + * @bus_clk_rate: current i2c bus clock rate
> + * @buf: ptr to msg buffer for easier use.
> + * @isr_status: cached copy of local ISR status.
> + * @lock: spinlock for IRQ synchronization.
> + */
> +struct mchp_corei2c_dev {
> + void __iomem *base;
> + size_t msg_len;
> + int msg_err;
> + struct completion msg_complete;
> + struct device *dev;
> + struct i2c_adapter adapter;
> + struct clk *i2c_clk;
> + spinlock_t lock; /* IRQ synchronization */
> + u32 bus_clk_rate;
> + u32 msg_read;
> + u32 isr_status;
> + u8 *buf;
> + u8 addr;
> +};
> +
> +static void mchp_corei2c_core_disable(struct mchp_corei2c_dev *idev)
> +{
> + u8 ctrl = readb(idev->base + CORE_I2C_CTRL);
> +
> + ctrl &= ~CTRL_ENS1;
> + writeb(ctrl, idev->base + CORE_I2C_CTRL);
> +}
> +
> +static void mchp_corei2c_core_enable(struct mchp_corei2c_dev *idev)
> +{
> + u8 ctrl = readb(idev->base + CORE_I2C_CTRL);
> +
> + ctrl |= CTRL_ENS1;
> + writeb(ctrl, idev->base + CORE_I2C_CTRL);
> +}
> +
> +static void mchp_corei2c_reset(struct mchp_corei2c_dev *idev)
> +{
> + mchp_corei2c_core_disable(idev);
> + mchp_corei2c_core_enable(idev);
> +}
> +
> +static inline void mchp_corei2c_stop(struct mchp_corei2c_dev *idev)
> +{
> + u8 ctrl = readb(idev->base + CORE_I2C_CTRL);
> +
> + ctrl |= CTRL_STO;
> + writeb(ctrl, idev->base + CORE_I2C_CTRL);
> +}
> +
> +static inline int mchp_corei2c_set_divisor(u32 rate,
> + struct mchp_corei2c_dev *idev)
> +{
> + u8 clkval, ctrl;
> +
> + if (rate >= 960)
> + clkval = PCLK_DIV_960;
> + else if (rate >= 256)
> + clkval = PCLK_DIV_256;
> + else if (rate >= 224)
> + clkval = PCLK_DIV_224;
> + else if (rate >= 192)
> + clkval = PCLK_DIV_192;
> + else if (rate >= 160)
> + clkval = PCLK_DIV_160;
> + else if (rate >= 120)
> + clkval = PCLK_DIV_120;
> + else if (rate >= 60)
> + clkval = PCLK_DIV_60;
> + else if (rate >= 8)
> + clkval = BCLK_DIV_8;
> + else
> + return -EINVAL;
> +
> + ctrl = readb(idev->base + CORE_I2C_CTRL);
> + ctrl &= ~CLK_MASK;
> + ctrl |= clkval;
> + writeb(ctrl, idev->base + CORE_I2C_CTRL);
> +
> + ctrl = readb(idev->base + CORE_I2C_CTRL);
> + if ((ctrl & CLK_MASK) != clkval)
> + return -EIO;
> +
> + return 0;
> +}
> +
> +static int mchp_corei2c_init(struct mchp_corei2c_dev *idev)
> +{
> + u32 clk_rate = clk_get_rate(idev->i2c_clk);
> + u32 divisor = clk_rate / idev->bus_clk_rate;
> + int ret;
> +
> + ret = mchp_corei2c_set_divisor(divisor, idev);
> + if (ret)
> + return ret;
> +
> + mchp_corei2c_reset(idev);
> +
> + return 0;
> +}
> +
> +static void mchp_corei2c_transfer(struct mchp_corei2c_dev *idev, u32 data)
> +{
> + if (idev->msg_len > 0)
> + writeb(data, idev->base + CORE_I2C_DATA);
> +}
> +
> +static void mchp_corei2c_empty_rx(struct mchp_corei2c_dev *idev)
> +{
> + u8 ctrl;
> +
> + if (idev->msg_len > 0) {
> + *idev->buf++ = readb(idev->base + CORE_I2C_DATA);
> + idev->msg_len--;
> + }
> +
> + if (idev->msg_len == 0) {
> + ctrl = readb(idev->base + CORE_I2C_CTRL);
> + ctrl &= ~CTRL_AA;
> + writeb(ctrl, idev->base + CORE_I2C_CTRL);
> + }
> +}
> +
> +static int mchp_corei2c_fill_tx(struct mchp_corei2c_dev *idev)
> +{
> + mchp_corei2c_transfer(idev, *idev->buf++);
> + idev->msg_len--;
> +
> + return 0;
> +}
> +
> +static irqreturn_t mchp_corei2c_handle_isr(struct mchp_corei2c_dev *idev)
> +{
> + u32 status = idev->isr_status;
> + u8 ctrl;
> +
> + if (!idev->buf)
> + return IRQ_NONE;
> +
> + switch (status) {
> + case STATUS_M_START_SENT:
> + case STATUS_M_REPEATED_START_SENT:
> + ctrl = readb(idev->base + CORE_I2C_CTRL);
> + ctrl &= ~CTRL_STA;
> + writeb(idev->addr, idev->base + CORE_I2C_DATA);
> + writeb(ctrl, idev->base + CORE_I2C_CTRL);
> + if (idev->msg_len <= 0)
> + goto finished;
> + break;
> + case STATUS_M_ARB_LOST:
> + idev->msg_err = -EAGAIN;
> + goto finished;
> + case STATUS_M_SLAW_ACK:
> + case STATUS_M_TX_DATA_ACK:
> + if (idev->msg_len > 0)
> + mchp_corei2c_fill_tx(idev);
> + else
> + goto last_byte;
> + break;
> + case STATUS_M_TX_DATA_NACK:
> + case STATUS_M_SLAR_NACK:
> + case STATUS_M_SLAW_NACK:
> + idev->msg_err = -ENXIO;
> + goto last_byte;
> + case STATUS_M_SLAR_ACK:
> + ctrl = readb(idev->base + CORE_I2C_CTRL);
> + if (idev->msg_len == 1u) {
> + ctrl &= ~CTRL_AA;
> + writeb(ctrl, idev->base + CORE_I2C_CTRL);
> + } else {
> + ctrl |= CTRL_AA;
> + writeb(ctrl, idev->base + CORE_I2C_CTRL);
> + }
> + if (idev->msg_len < 1u)
> + goto last_byte;
> + break;
> + case STATUS_M_RX_DATA_ACKED:
> + mchp_corei2c_empty_rx(idev);
> + break;
> + case STATUS_M_RX_DATA_NACKED:
> + mchp_corei2c_empty_rx(idev);
> + if (idev->msg_len == 0)
> + goto last_byte;
> + break;
> + default:
> + break;
> + }
> +
> + return IRQ_HANDLED;
> +
> +last_byte:
> + /* On the last byte to be transmitted, send STOP */
> + mchp_corei2c_stop(idev);
> +finished:
> + complete(&idev->msg_complete);
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t mchp_corei2c_isr(int irq, void *_dev)
> +{
> + struct mchp_corei2c_dev *idev = _dev;
> + irqreturn_t ret = IRQ_NONE;
> + u8 ctrl;
> +
> + ctrl = readb(idev->base + CORE_I2C_CTRL);
> + if (ctrl & CTRL_SI) {
> + idev->isr_status = readb(idev->base + CORE_I2C_STATUS);
> + ret = mchp_corei2c_handle_isr(idev);
> + }
> +
> + /* Clear the si flag */
> + ctrl = readb(idev->base + CORE_I2C_CTRL);
> + ctrl &= ~CTRL_SI;
> + writeb(ctrl, idev->base + CORE_I2C_CTRL);
> +
> + return ret;
> +}
> +
> +static int mchp_corei2c_xfer_msg(struct mchp_corei2c_dev *idev,
> + struct i2c_msg *msg)
> +{
> + u8 ctrl;
> + unsigned long time_left;
> +
> + if (msg->len == 0)
> + return -EINVAL;
> +
> + idev->addr = i2c_8bit_addr_from_msg(msg);
> + idev->msg_len = msg->len;
> + idev->buf = msg->buf;
> + idev->msg_err = 0;
> + idev->msg_read = (msg->flags & I2C_M_RD);
> +
> + reinit_completion(&idev->msg_complete);
> +
> + mchp_corei2c_core_enable(idev);
> +
> + ctrl = readb(idev->base + CORE_I2C_CTRL);
> + ctrl |= CTRL_STA;
> + writeb(ctrl, idev->base + CORE_I2C_CTRL);
> +
> + time_left = wait_for_completion_timeout(&idev->msg_complete,
> + MICROCHIP_I2C_TIMEOUT);
> + if (!time_left)
> + return -ETIMEDOUT;
> +
> + return idev->msg_err;
> +}
> +
> +static int mchp_corei2c_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs,
> + int num)
> +{
> + struct mchp_corei2c_dev *idev = i2c_get_adapdata(adap);
> + int i, ret;
> +
> + for (i = 0; i < num; i++) {
> + ret = mchp_corei2c_xfer_msg(idev, msgs++);
> + if (ret)
> + return ret;
> + }
> +
> + return num;
> +}
> +
> +static u32 mchp_corei2c_func(struct i2c_adapter *adap)
> +{
> + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
> +}
> +
> +static const struct i2c_algorithm mchp_corei2c_algo = {
> + .master_xfer = mchp_corei2c_xfer,
> + .functionality = mchp_corei2c_func,
> +};
> +
> +static int mchp_corei2c_probe(struct platform_device *pdev)
> +{
> + struct mchp_corei2c_dev *idev = NULL;
> + struct resource *res;
> + int irq, ret;
> + u32 val;
> +
> + idev = devm_kzalloc(&pdev->dev, sizeof(*idev), GFP_KERNEL);
> + if (!idev)
> + return -ENOMEM;
> +
> + idev->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
> + if (IS_ERR(idev->base))
> + return PTR_ERR(idev->base);
> +
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0)
> + return dev_err_probe(&pdev->dev, irq,
> + "missing interrupt resource\n");
> +
> + idev->i2c_clk = devm_clk_get(&pdev->dev, NULL);
> + if (IS_ERR(idev->i2c_clk))
> + return dev_err_probe(&pdev->dev, PTR_ERR(idev->i2c_clk),
> + "missing clock\n");
> +
> + idev->dev = &pdev->dev;
> + init_completion(&idev->msg_complete);
> + spin_lock_init(&idev->lock);
> +
> + val = device_property_read_u32(idev->dev, "clock-frequency",
> + &idev->bus_clk_rate);
> + if (val) {
> + dev_info(&pdev->dev, "default to 100kHz\n");
> + idev->bus_clk_rate = 100000;
> + }
> +
> + if (idev->bus_clk_rate > 400000)
> + return dev_err_probe(&pdev->dev, -EINVAL,
> + "clock-frequency too high: %d\n",
> + idev->bus_clk_rate);
> +
> + ret = devm_request_irq(&pdev->dev, irq, mchp_corei2c_isr, IRQF_SHARED,
> + pdev->name, idev);
> + if (ret)
> + return dev_err_probe(&pdev->dev, ret,
> + "failed to claim irq %d\n", irq);
> +
> + ret = clk_prepare_enable(idev->i2c_clk);
> + if (ret)
> + return dev_err_probe(&pdev->dev, ret,
> + "failed to enable clock\n");
> +
> + ret = mchp_corei2c_init(idev);
> + if (ret) {
> + clk_disable_unprepare(idev->i2c_clk);
> + return dev_err_probe(&pdev->dev, ret, "failed to program clock divider\n");
> + }
> +
> + i2c_set_adapdata(&idev->adapter, idev);
> + snprintf(idev->adapter.name, sizeof(idev->adapter.name),
> + "Microchip I2C hw bus");
> + idev->adapter.owner = THIS_MODULE;
> + idev->adapter.algo = &mchp_corei2c_algo;
> + idev->adapter.dev.parent = &pdev->dev;
> + idev->adapter.dev.of_node = pdev->dev.of_node;
> +
> + platform_set_drvdata(pdev, idev);
> +
> + ret = i2c_add_adapter(&idev->adapter);
> + if (ret) {
> + clk_disable_unprepare(idev->i2c_clk);
> + return ret;
> + }
> +
> + dev_info(&pdev->dev, "Microchip I2C Probe Complete\n");
> +
> + return 0;
> +}
> +
> +static int mchp_corei2c_remove(struct platform_device *pdev)
> +{
> + struct mchp_corei2c_dev *idev = platform_get_drvdata(pdev);
> +
> + clk_disable_unprepare(idev->i2c_clk);
> + i2c_del_adapter(&idev->adapter);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id mchp_corei2c_of_match[] = {
> + { .compatible = "microchip,mpfs-i2c" },
> + { .compatible = "microchip,corei2c-rtl-v7" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, mchp_corei2c_of_match);
> +
> +static struct platform_driver mchp_corei2c_driver = {
> + .probe = mchp_corei2c_probe,
> + .remove = mchp_corei2c_remove,
> + .driver = {
> + .name = "microchip-corei2c",
> + .of_match_table = mchp_corei2c_of_match,
> + },
> +};
> +
> +module_platform_driver(mchp_corei2c_driver);
> +
> +MODULE_DESCRIPTION("Microchip CoreI2C bus driver");
> +MODULE_AUTHOR("Daire McNamara <daire.mcnamara at microchip.com>");
> +MODULE_AUTHOR("Conor Dooley <conor.dooley at microchip.com>");
> +MODULE_LICENSE("GPL v2");
> --
> 2.35.1
>
>
> _______________________________________________
> linux-riscv mailing list
> linux-riscv at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
More information about the linux-riscv
mailing list