[RESEND PATCH v7 1/5] dt-bindings: leds: Add Allwinner A100 LED controller
Samuel Holland
samuel at sholland.org
Sat Dec 31 15:55:36 PST 2022
The Allwinner A100, R329, and D1 SoCs contain an LED controller designed
to drive a series of RGB LED pixels. It supports PIO and DMA transfers,
and has configurable timing and pixel format. All three implementations
appear to be identical, so use the oldest as the fallback compatible.
Acked-by: Maxime Ripard <maxime at cerno.tech>
Reviewed-by: Rob Herring <robh at kernel.org>
Signed-off-by: Samuel Holland <samuel at sholland.org>
---
(no changes since v5)
Changes in v5:
- A100 contains the original implementation, so use that as the base
compatible string, and rename the binding to match
- Add "unevaluatedProperties: false" to the child multi-led binding
Changes in v4:
- Use "default" instead of "maxItems" for timing properties
Changes in v3:
- Removed quotes from enumeration values
- Added vendor prefix to timing/format properties
- Renamed "format" property to "pixel-format" for clarity
- Dropped "vled-supply" as it is unrelated to the controller hardware
Changes in v2:
- Fixed typo leading to duplicate t1h-ns property
- Removed "items" layer in definition of dmas/dma-names
- Replaced uint32 type reference with maxItems in timing properties
.../leds/allwinner,sun50i-a100-ledc.yaml | 139 ++++++++++++++++++
1 file changed, 139 insertions(+)
create mode 100644 Documentation/devicetree/bindings/leds/allwinner,sun50i-a100-ledc.yaml
diff --git a/Documentation/devicetree/bindings/leds/allwinner,sun50i-a100-ledc.yaml b/Documentation/devicetree/bindings/leds/allwinner,sun50i-a100-ledc.yaml
new file mode 100644
index 000000000000..fc8ecf6f91e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/allwinner,sun50i-a100-ledc.yaml
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/allwinner,sun50i-a100-ledc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A100 LED Controller Bindings
+
+maintainers:
+ - Samuel Holland <samuel at sholland.org>
+
+description:
+ The LED controller found in Allwinner sunxi SoCs uses a one-wire serial
+ interface to drive up to 1024 RGB LEDs.
+
+properties:
+ compatible:
+ oneOf:
+ - const: allwinner,sun50i-a100-ledc
+ - items:
+ - enum:
+ - allwinner,sun20i-d1-ledc
+ - allwinner,sun50i-r329-ledc
+ - const: allwinner,sun50i-a100-ledc
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Bus clock
+ - description: Module clock
+
+ clock-names:
+ items:
+ - const: bus
+ - const: mod
+
+ resets:
+ maxItems: 1
+
+ dmas:
+ maxItems: 1
+ description: TX DMA channel
+
+ dma-names:
+ const: tx
+
+ allwinner,pixel-format:
+ description: Pixel format (subpixel transmission order), default is "grb"
+ enum:
+ - bgr
+ - brg
+ - gbr
+ - grb
+ - rbg
+ - rgb
+
+ allwinner,t0h-ns:
+ default: 336
+ description: Length of high pulse when transmitting a "0" bit
+
+ allwinner,t0l-ns:
+ default: 840
+ description: Length of low pulse when transmitting a "0" bit
+
+ allwinner,t1h-ns:
+ default: 882
+ description: Length of high pulse when transmitting a "1" bit
+
+ allwinner,t1l-ns:
+ default: 294
+ description: Length of low pulse when transmitting a "1" bit
+
+ allwinner,treset-ns:
+ default: 300000
+ description: Minimum delay between transmission frames
+
+patternProperties:
+ "^multi-led@[0-9a-f]+$":
+ type: object
+ $ref: leds-class-multicolor.yaml#
+ unevaluatedProperties: false
+ properties:
+ reg:
+ minimum: 0
+ maximum: 1023
+ description: Index of the LED in the series (must be contiguous)
+
+ required:
+ - reg
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - clock-names
+ - resets
+ - dmas
+ - dma-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ #include <dt-bindings/leds/common.h>
+
+ ledc: led-controller at 2008000 {
+ compatible = "allwinner,sun20i-d1-ledc",
+ "allwinner,sun50i-a100-ledc";
+ reg = <0x2008000 0x400>;
+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&ccu 12>, <&ccu 34>;
+ clock-names = "bus", "mod";
+ resets = <&ccu 12>;
+ dmas = <&dma 42>;
+ dma-names = "tx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ multi-led at 0 {
+ reg = <0x0>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_INDICATOR;
+ };
+ };
+
+...
--
2.37.4
More information about the linux-riscv
mailing list