[PATCH v2 5/6] dt-bindings: clock: Add D1 CAN bus gates and resets

[Samuel Holland]

The D1 CCU contains gates and resets for two CAN buses. While the CAN
bus controllers are only documented for the T113 SoC, the CCU is the
same across all SoC variants.

Reviewed-by: Andre Przywara <andre.przywara at arm.com>
Signed-off-by: Samuel Holland <samuel at sholland.org>
---

Changes in v2:
 - Move dt-bindings header changes to a separate patch

 include/dt-bindings/clock/sun20i-d1-ccu.h | 2 ++
 include/dt-bindings/reset/sun20i-d1-ccu.h | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/include/dt-bindings/clock/sun20i-d1-ccu.h b/include/dt-bindings/clock/sun20i-d1-ccu.h
index e3ac53315e1a..e143b9929763 100644
--- a/include/dt-bindings/clock/sun20i-d1-ccu.h
+++ b/include/dt-bindings/clock/sun20i-d1-ccu.h
@@ -152,5 +152,7 @@
 #define CLK_FANOUT0		142
 #define CLK_FANOUT1		143
 #define CLK_FANOUT2		144
+#define CLK_BUS_CAN0		145
+#define CLK_BUS_CAN1		146
 
 #endif /* _DT_BINDINGS_CLK_SUN20I_D1_CCU_H_ */
diff --git a/include/dt-bindings/reset/sun20i-d1-ccu.h b/include/dt-bindings/reset/sun20i-d1-ccu.h
index de9ff5203239..f8001cf50bf1 100644
--- a/include/dt-bindings/reset/sun20i-d1-ccu.h
+++ b/include/dt-bindings/reset/sun20i-d1-ccu.h
@@ -73,5 +73,7 @@
 #define RST_BUS_DSP_CFG		63
 #define RST_BUS_DSP_DBG		64
 #define RST_BUS_RISCV_CFG	65
+#define RST_BUS_CAN0		66
+#define RST_BUS_CAN1		67
 
 #endif /* _DT_BINDINGS_RST_SUN20I_D1_CCU_H_ */
-- 
2.37.4