[PATCH v3 7/7] riscv: dts: starfive: Add StarFive JH7110 VisionFive 2 board device tree

[Conor Dooley]

On Fri, Dec 23, 2022 at 11:12:34AM +0800, Hal Feng wrote:
> On Tue, 20 Dec 2022 21:26:07 +0000, Conor Dooley wrote:
> > On Tue, Dec 20, 2022 at 09:12:47AM +0800, Hal Feng wrote:
> > > From: Emil Renner Berthing <kernel at esmil.dk>
> > > 
> > > Add a minimal device tree for StarFive JH7110 VisionFive 2 board
> > > which has version A and version B. Support booting and basic
> > > clock/reset/pinctrl/uart drivers.
> > > 
> > > Signed-off-by: Emil Renner Berthing <kernel at esmil.dk>
> > > Co-developed-by: Jianlong Huang <jianlong.huang at starfivetech.com>
> > > Signed-off-by: Jianlong Huang <jianlong.huang at starfivetech.com>
> > > Co-developed-by: Hal Feng <hal.feng at starfivetech.com>
> > > Signed-off-by: Hal Feng <hal.feng at starfivetech.com>
> > > ---

> > > diff --git a/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> > > new file mode 100644
> > > index 000000000000..c60280b89c73
> > > --- /dev/null
> > > +++ b/arch/riscv/boot/dts/starfive/jh7110-starfive-visionfive-2.dtsi
> > > @@ -0,0 +1,111 @@
> > > +// SPDX-License-Identifier: GPL-2.0 OR MIT
> > > +/*
> > > + * Copyright (C) 2022 StarFive Technology Co., Ltd.
> > > + * Copyright (C) 2022 Emil Renner Berthing <kernel at esmil.dk>
> > > + */
> > > +
> > > +/dts-v1/;
> > > +#include "jh7110.dtsi"
> > > +#include "jh7110-pinfunc.h"
> > > +#include <dt-bindings/gpio/gpio.h>
> > > +
> > > +/ {
> > > +	aliases {
> > > +		serial0 = &uart0;
> > > +	};
> > > +
> > > +	chosen {
> > > +		stdout-path = "serial0:115200n8";
> > > +	};
> > > +
> > > +	cpus {
> > > +		timebase-frequency = <4000000>;
> > > +	};
> > > +
> > > +	memory at 40000000 {
> > > +		device_type = "memory";
> > > +		reg = <0x0 0x40000000 0x1 0x0>;
> > 
> > Is this a good idea when you have SKUs with 2, 4 & 8 GiB of DDR?
> 
> The VisionFive 2 board only has 4GB version and 8GB version now. Before
> linux startup, we will change this property in dtb through u-boot to
> make sure the board can boot up with the correct memory size.

Ah I see. Thanks.

-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 228 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-riscv/attachments/20221228/c538d39f/attachment.sig>