[PATCH v3 6/7] riscv: dts: starfive: Add initial StarFive JH7110 device tree
Krzysztof Kozlowski
krzysztof.kozlowski at linaro.org
Tue Dec 20 02:10:11 PST 2022
On 20/12/2022 02:12, Hal Feng wrote:
> From: Emil Renner Berthing <kernel at esmil.dk>
>
> Add initial device tree for the JH7110 RISC-V SoC by StarFive
> Technology Ltd.
>
> Signed-off-by: Emil Renner Berthing <kernel at esmil.dk>
> Co-developed-by: Jianlong Huang <jianlong.huang at starfivetech.com>
> Signed-off-by: Jianlong Huang <jianlong.huang at starfivetech.com>
> Co-developed-by: Hal Feng <hal.feng at starfivetech.com>
> Signed-off-by: Hal Feng <hal.feng at starfivetech.com>
> ---
> arch/riscv/boot/dts/starfive/jh7110.dtsi | 411 +++++++++++++++++++++++
> 1 file changed, 411 insertions(+)
> create mode 100644 arch/riscv/boot/dts/starfive/jh7110.dtsi
>
> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> new file mode 100644
> index 000000000000..64d260ea1f29
> --- /dev/null
> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> @@ -0,0 +1,411 @@
> +// SPDX-License-Identifier: GPL-2.0 OR MIT
> +/*
> + * Copyright (C) 2022 StarFive Technology Co., Ltd.
> + * Copyright (C) 2022 Emil Renner Berthing <kernel at esmil.dk>
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/clock/starfive,jh7110-crg.h>
> +#include <dt-bindings/reset/starfive,jh7110-crg.h>
> +
> +/ {
> + compatible = "starfive,jh7110";
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + S76_0: cpu at 0 {
> + compatible = "sifive,u74-mc", "riscv";
> + reg = <0>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <8192>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <16384>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imac";
> + tlb-split;
> + status = "disabled";
> +
> + cpu0_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + U74_1: cpu at 1 {
> + compatible = "sifive,u74-mc", "riscv";
> + reg = <1>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imafdc";
> + tlb-split;
> +
> + cpu1_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + U74_2: cpu at 2 {
> + compatible = "sifive,u74-mc", "riscv";
> + reg = <2>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imafdc";
> + tlb-split;
> +
> + cpu2_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + U74_3: cpu at 3 {
> + compatible = "sifive,u74-mc", "riscv";
> + reg = <3>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imafdc";
> + tlb-split;
> +
> + cpu3_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + U74_4: cpu at 4 {
> + compatible = "sifive,u74-mc", "riscv";
> + reg = <4>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imafdc";
> + tlb-split;
> +
> + cpu4_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&S76_0>;
> + };
> +
> + core1 {
> + cpu = <&U74_1>;
> + };
> +
> + core2 {
> + cpu = <&U74_2>;
> + };
> +
> + core3 {
> + cpu = <&U74_3>;
> + };
> +
> + core4 {
> + cpu = <&U74_4>;
> + };
> + };
> + };
> + };
> +
> + osc: osc {
Node names should be generic, so why this is "osc" and other oscillators
are not "osc"?
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + rtc_osc: rtc_osc {
No underscores in node names. Generic node names (so each of them
starting or ending with clock).
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + gmac0_rmii_refin: gmac0_rmii_refin {
Same problem... and actually you have way too many fixed clocks which do
nothing. It looks like you avoid to define proper clock controller.
What's the point for all these clocks? These are no-op.
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + gmac0_rgmii_rxin: gmac0_rgmii_rxin {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + gmac1_rmii_refin: gmac1_rmii_refin {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + gmac1_rgmii_rxin: gmac1_rgmii_rxin {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + i2stx_bclk_ext: i2stx_bclk_ext {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + i2stx_lrck_ext: i2stx_lrck_ext {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + i2srx_bclk_ext: i2srx_bclk_ext {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + i2srx_lrck_ext: i2srx_lrck_ext {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + tdm_ext: tdm_ext {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + mclk_ext: mclk_ext {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + };
> +
> + soc {
> + compatible = "simple-bus";
> + interrupt-parent = <&plic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + clint: clint at 2000000 {
Node names should be generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
> + compatible = "starfive,jh7110-clint", "sifive,clint0";
> + reg = <0x0 0x2000000 0x0 0x10000>;
> + interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
> + <&cpu1_intc 3>, <&cpu1_intc 7>,
> + <&cpu2_intc 3>, <&cpu2_intc 7>,
> + <&cpu3_intc 3>, <&cpu3_intc 7>,
> + <&cpu4_intc 3>, <&cpu4_intc 7>;
> + };
> +
> + plic: plic at c000000 {
Node names should be generic, so interrupt-controller
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
> + compatible = "starfive,jh7110-plic", "sifive,plic-1.0.0";
> + reg = <0x0 0xc000000 0x0 0x4000000>;
> + interrupts-extended = <&cpu0_intc 11>,
> + <&cpu1_intc 11>, <&cpu1_intc 9>,
> + <&cpu2_intc 11>, <&cpu2_intc 9>,
> + <&cpu3_intc 11>, <&cpu3_intc 9>,
> + <&cpu4_intc 11>, <&cpu4_intc 9>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #address-cells = <0>;
> + riscv,ndev = <136>;
> + };
> +
> + ccache: cache-controller at 2010000 {
> + compatible = "starfive,jh7110-ccache", "sifive,ccache0", "cache";
> + reg = <0x0 0x2010000 0x0 0x4000>;
> + interrupts = <1>, <3>, <4>, <2>;
> + cache-block-size = <64>;
> + cache-level = <2>;
> + cache-sets = <2048>;
> + cache-size = <2097152>;
> + cache-unified;
> + };
> +
> + uart0: serial at 10000000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x10000000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_UART0_CORE>,
> + <&syscrg JH7110_SYSCLK_UART0_APB>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&syscrg JH7110_SYSRST_UART0_APB>;
> + interrupts = <32>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
Best regards,
Krzysztof
More information about the linux-riscv
mailing list