[PATCH v3] RISC-V: re-order Kconfig selects alphanumerically

Conor Dooley conor at kernel.org
Mon Dec 19 09:28:37 PST 2022


From: Conor Dooley <conor.dooley at microchip.com>

Selects should be sorted alphanumerically, and were tidied up originally
by Palmer in commit e8c7ef7d5819 ("RISC-V: Sort select statements
alphanumerically") since then, things have gotten out of order again.
Fish RMK's original script out of commit b1b3f49ce460 ("ARM: config:
sort select statements alphanumerically") and do some spring cleaning.

Signed-off-by: Conor Dooley <conor.dooley at microchip.com>
Acked-by: Björn Töpel <bjorn at rivosinc.com>
---
v1 only did one movement, v2 does every one.
v3 is v2 but rebased on riscv/for-next.

There's no difference in the generated .config from allmodconfig
before and after :)
---
 arch/riscv/Kconfig | 50 +++++++++++++++++++++++-----------------------
 1 file changed, 25 insertions(+), 25 deletions(-)

diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index e2b656043abf..f2adc846dbc6 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -15,10 +15,11 @@ config RISCV
 	select ARCH_CLOCKSOURCE_INIT
 	select ARCH_ENABLE_HUGEPAGE_MIGRATION if HUGETLB_PAGE && MIGRATION
 	select ARCH_ENABLE_SPLIT_PMD_PTLOCK if PGTABLE_LEVELS > 2
+	select ARCH_ENABLE_THP_MIGRATION if TRANSPARENT_HUGEPAGE
 	select ARCH_HAS_BINFMT_FLAT
 	select ARCH_HAS_CURRENT_STACK_POINTER
-	select ARCH_HAS_DEBUG_VM_PGTABLE
 	select ARCH_HAS_DEBUG_VIRTUAL if MMU
+	select ARCH_HAS_DEBUG_VM_PGTABLE
 	select ARCH_HAS_DEBUG_WX
 	select ARCH_HAS_FORTIFY_SOURCE
 	select ARCH_HAS_GCOV_PROFILE_ALL
@@ -42,15 +43,15 @@ config RISCV
 	select ARCH_SUPPORTS_PAGE_TABLE_CHECK if MMU
 	select ARCH_USE_MEMTEST
 	select ARCH_USE_QUEUED_RWLOCKS
+	select ARCH_WANTS_THP_SWAP if HAVE_ARCH_TRANSPARENT_HUGEPAGE
 	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
 	select ARCH_WANT_FRAME_POINTERS
 	select ARCH_WANT_GENERAL_HUGETLB
 	select ARCH_WANT_HUGE_PMD_SHARE if 64BIT
-	select ARCH_WANTS_THP_SWAP if HAVE_ARCH_TRANSPARENT_HUGEPAGE
 	select BINFMT_FLAT_NO_DATA_START_OFFSET if !MMU
 	select BUILDTIME_TABLE_SORT if MMU
-	select CLONE_BACKWARDS
 	select CLINT_TIMER if !MMU
+	select CLONE_BACKWARDS
 	select COMMON_CLK
 	select CPU_PM if CPU_IDLE
 	select EDAC_SUPPORT
@@ -85,16 +86,16 @@ config RISCV
 	select HAVE_ARCH_MMAP_RND_BITS if MMU
 	select HAVE_ARCH_MMAP_RND_COMPAT_BITS if COMPAT
 	select HAVE_ARCH_SECCOMP_FILTER
+	select HAVE_ARCH_THREAD_STRUCT_WHITELIST
 	select HAVE_ARCH_TRACEHOOK
 	select HAVE_ARCH_TRANSPARENT_HUGEPAGE if 64BIT && MMU
-	select ARCH_ENABLE_THP_MIGRATION if TRANSPARENT_HUGEPAGE
-	select HAVE_ARCH_THREAD_STRUCT_WHITELIST
 	select HAVE_ARCH_VMAP_STACK if MMU && 64BIT
 	select HAVE_ASM_MODVERSIONS
 	select HAVE_CONTEXT_TRACKING_USER
 	select HAVE_DEBUG_KMEMLEAK
 	select HAVE_DMA_CONTIGUOUS if MMU
 	select HAVE_EBPF_JIT if MMU
+	select HAVE_FUNCTION_ARG_ACCESS_API
 	select HAVE_FUNCTION_ERROR_INJECTION
 	select HAVE_GCC_PLUGINS
 	select HAVE_GENERIC_VDSO if MMU && 64BIT
@@ -111,10 +112,9 @@ config RISCV
 	select HAVE_PERF_USER_STACK_DUMP
 	select HAVE_POSIX_CPU_TIMERS_TASK_WORK
 	select HAVE_REGS_AND_STACK_ACCESS_API
-	select HAVE_FUNCTION_ARG_ACCESS_API
+	select HAVE_RSEQ
 	select HAVE_STACKPROTECTOR
 	select HAVE_SYSCALL_TRACEPOINTS
-	select HAVE_RSEQ
 	select IRQ_DOMAIN
 	select IRQ_FORCED_THREADING
 	select MODULES_USE_ELF_RELA if MODULES
@@ -235,9 +235,9 @@ config LOCKDEP_SUPPORT
 config RISCV_DMA_NONCOHERENT
 	bool
 	select ARCH_HAS_DMA_PREP_COHERENT
-	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
-	select ARCH_HAS_SYNC_DMA_FOR_CPU
 	select ARCH_HAS_SETUP_DMA_OPS
+	select ARCH_HAS_SYNC_DMA_FOR_CPU
+	select ARCH_HAS_SYNC_DMA_FOR_DEVICE
 	select DMA_DIRECT_REMAP
 
 config AS_HAS_INSN
@@ -352,11 +352,11 @@ endchoice
 config NUMA
 	bool "NUMA Memory Allocation and Scheduler Support"
 	depends on SMP && MMU
+	select ARCH_SUPPORTS_NUMA_BALANCING
 	select GENERIC_ARCH_NUMA
+	select NEED_PER_CPU_EMBED_FIRST_CHUNK
 	select OF_NUMA
-	select ARCH_SUPPORTS_NUMA_BALANCING
 	select USE_PERCPU_NUMA_NODE_ID
-	select NEED_PER_CPU_EMBED_FIRST_CHUNK
 	help
 	  Enable NUMA (Non-Uniform Memory Access) support.
 
@@ -401,8 +401,8 @@ config RISCV_ISA_SVPBMT
 	bool "SVPBMT extension support"
 	depends on 64BIT && MMU
 	depends on !XIP_KERNEL
-	select RISCV_ALTERNATIVE
 	default y
+	select RISCV_ALTERNATIVE
 	help
 	   Adds support to dynamically detect the presence of the SVPBMT
 	   ISA-extension (Supervisor-mode: page-based memory types) and
@@ -427,9 +427,9 @@ config RISCV_ISA_ZICBOM
 	bool "Zicbom extension support for non-coherent DMA operation"
 	depends on TOOLCHAIN_HAS_ZICBOM
 	depends on !XIP_KERNEL && MMU
-	select RISCV_DMA_NONCOHERENT
-	select RISCV_ALTERNATIVE
 	default y
+	select RISCV_ALTERNATIVE
+	select RISCV_DMA_NONCOHERENT
 	help
 	   Adds support to dynamically detect the presence of the ZICBOM
 	   extension (Cache Block Management Operations) and enable its
@@ -491,9 +491,9 @@ config RISCV_BOOT_SPINWAIT
 
 config KEXEC
 	bool "Kexec system call"
-	select KEXEC_CORE
-	select HOTPLUG_CPU if SMP
 	depends on MMU
+	select HOTPLUG_CPU if SMP
+	select KEXEC_CORE
 	help
 	  kexec is a system call that implements the ability to shutdown your
 	  current kernel, and to start another kernel. It is like a reboot
@@ -504,10 +504,10 @@ config KEXEC
 
 config KEXEC_FILE
 	bool "kexec file based systmem call"
+	depends on 64BIT && MMU
+	select HAVE_IMA_KEXEC if IMA
 	select KEXEC_CORE
 	select KEXEC_ELF
-	select HAVE_IMA_KEXEC if IMA
-	depends on 64BIT && MMU
 	help
 	  This is new version of kexec system call. This system call is
 	  file based and takes file descriptors as system call argument
@@ -596,15 +596,15 @@ config EFI_STUB
 config EFI
 	bool "UEFI runtime support"
 	depends on OF && !XIP_KERNEL
-	select LIBFDT
-	select UCS2_STRING
-	select EFI_PARAMS_FROM_FDT
-	select EFI_STUB
+	depends on MMU
+	default y
 	select EFI_GENERIC_STUB
+	select EFI_PARAMS_FROM_FDT
 	select EFI_RUNTIME_WRAPPERS
+	select EFI_STUB
+	select LIBFDT
 	select RISCV_ISA_C
-	depends on MMU
-	default y
+	select UCS2_STRING
 	help
 	  This option provides support for runtime services provided
 	  by UEFI firmware (such as non-volatile variables, realtime
@@ -683,8 +683,8 @@ config PORTABLE
 	bool
 	default !NONPORTABLE
 	select EFI
-	select OF
 	select MMU
+	select OF
 
 menu "Power management options"
 
-- 
2.38.1




More information about the linux-riscv mailing list