[RESEND PATCH v2 1/3] dt-bindings: power: Add starfive,jh71xx-pmu

[Rob Herring]

On Thu, 08 Dec 2022 16:45:21 +0800, Walker Chen wrote:
> Add bindings for Power Management Unit (PMU) on the StarFive JH71XX SoC.
> 
> Signed-off-by: Walker Chen <walker.chen at starfivetech.com>
> ---
>  .../bindings/power/starfive,jh71xx-pmu.yaml   | 45 +++++++++++++++++++
>  .../dt-bindings/power/starfive,jh7110-pmu.h   | 17 +++++++
>  2 files changed, 62 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/starfive,jh71xx-pmu.yaml
>  create mode 100644 include/dt-bindings/power/starfive,jh7110-pmu.h
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:
./Documentation/devicetree/bindings/power/starfive,jh71xx-pmu.yaml:18:7: [warning] wrong indentation: expected 4 but found 6 (indentation)

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/power/starfive,jh71xx-pmu.yaml: properties:compatible: [{'enum': ['starfive,jh7110-pmu']}] is not of type 'object', 'boolean'
	from schema $id: http://json-schema.org/draft-07/schema#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/power/starfive,jh71xx-pmu.yaml: ignoring, error in schema: properties: compatible
Documentation/devicetree/bindings/power/starfive,jh71xx-pmu.example.dtb:0:0: /example-0/power-controller at 17030000: failed to match any schema with compatible: ['starfive,jh7110-pmu']

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221208084523.9733-2-walker.chen@starfivetech.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.