[PATCH v3 12/12] riscv: defconfig: Enable the Allwinner D1 platform and drivers
Samuel Holland
samuel at sholland.org
Thu Dec 8 01:02:37 PST 2022
Now that several D1-based boards are supported, enable the platform in
our defconfig. Build in the drivers which are necessary to boot, such as
the pinctrl, MMC, RTC (which provides critical clocks), SPI (for flash),
and watchdog (which may be left enabled by the bootloader). Other common
onboard peripherals are enabled as modules.
Acked-by: Palmer Dabbelt <palmer at rivosinc.com>
Reviewed-by: Guo Ren <guoren at kernel.org>
Signed-off-by: Samuel Holland <samuel at sholland.org>
---
(no changes since v1)
arch/riscv/configs/defconfig | 22 +++++++++++++++++++++-
1 file changed, 21 insertions(+), 1 deletion(-)
diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
index 74ed7037314f..368175560da9 100644
--- a/arch/riscv/configs/defconfig
+++ b/arch/riscv/configs/defconfig
@@ -25,6 +25,7 @@ CONFIG_BLK_DEV_INITRD=y
CONFIG_EXPERT=y
# CONFIG_SYSFS_SYSCALL is not set
CONFIG_PROFILING=y
+CONFIG_ARCH_SUNXI=y
CONFIG_SOC_MICROCHIP_POLARFIRE=y
CONFIG_SOC_SIFIVE=y
CONFIG_SOC_STARFIVE=y
@@ -119,8 +120,10 @@ CONFIG_VIRTIO_NET=y
CONFIG_MACB=y
CONFIG_E1000E=y
CONFIG_R8169=y
+CONFIG_STMMAC_ETH=m
CONFIG_MICROSEMI_PHY=y
CONFIG_INPUT_MOUSEDEV=y
+CONFIG_KEYBOARD_SUN4I_LRADC=m
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_DW=y
@@ -128,14 +131,20 @@ CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_VIRTIO_CONSOLE=y
CONFIG_HW_RANDOM=y
CONFIG_HW_RANDOM_VIRTIO=y
+CONFIG_I2C_MV64XXX=m
CONFIG_SPI=y
CONFIG_SPI_SIFIVE=y
+CONFIG_SPI_SUN6I=y
# CONFIG_PTP_1588_CLOCK is not set
-CONFIG_GPIOLIB=y
CONFIG_GPIO_SIFIVE=y
+CONFIG_WATCHDOG=y
+CONFIG_SUNXI_WATCHDOG=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_DRM=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_NOUVEAU=m
+CONFIG_DRM_SUN4I=m
CONFIG_DRM_VIRTIO_GPU=m
CONFIG_FB=y
CONFIG_FRAMEBUFFER_CONSOLE=y
@@ -148,19 +157,30 @@ CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_STORAGE=y
CONFIG_USB_UAS=y
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_SUNXI=m
+CONFIG_NOP_USB_XCEIV=m
CONFIG_MMC=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_CADENCE=y
CONFIG_MMC_SPI=y
+CONFIG_MMC_SUNXI=y
CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_SUN6I=y
+CONFIG_DMADEVICES=y
+CONFIG_DMA_SUN6I=m
CONFIG_VIRTIO_PCI=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_INPUT=y
CONFIG_VIRTIO_MMIO=y
+CONFIG_SUN8I_DE2_CCU=m
+CONFIG_SUN50I_IOMMU=y
CONFIG_RPMSG_CHAR=y
CONFIG_RPMSG_CTRL=y
CONFIG_RPMSG_VIRTIO=y
+CONFIG_PHY_SUN4I_USB=m
+CONFIG_NVMEM_SUNXI_SID=y
CONFIG_EXT4_FS=y
CONFIG_EXT4_FS_POSIX_ACL=y
CONFIG_EXT4_FS_SECURITY=y
--
2.37.4
More information about the linux-riscv
mailing list