[RESEND PATCH v2 1/3] dt-bindings: power: Add starfive,jh71xx-pmu

Krzysztof Kozlowski krzysztof.kozlowski at linaro.org
Thu Dec 8 00:59:27 PST 2022


On 08/12/2022 09:45, Walker Chen wrote:
> Add bindings for Power Management Unit (PMU) on the StarFive JH71XX SoC.
> 
> Signed-off-by: Walker Chen <walker.chen at starfivetech.com>
> ---
>  .../bindings/power/starfive,jh71xx-pmu.yaml   | 45 +++++++++++++++++++
>  .../dt-bindings/power/starfive,jh7110-pmu.h   | 17 +++++++
>  2 files changed, 62 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/power/starfive,jh71xx-pmu.yaml

Filename matching compatible, so:
starfive,jh7110-pmu.yaml


>  create mode 100644 include/dt-bindings/power/starfive,jh7110-pmu.h
> 
> diff --git a/Documentation/devicetree/bindings/power/starfive,jh71xx-pmu.yaml b/Documentation/devicetree/bindings/power/starfive,jh71xx-pmu.yaml
> new file mode 100644
> index 000000000000..f308ae136a57
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/starfive,jh71xx-pmu.yaml
> @@ -0,0 +1,45 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/power/starfive,jh71xx-pmu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: StarFive JH71xx Power Management Unit
> +
> +maintainers:
> +  - Walker Chen <walker.chen at starfivetech.com>
> +
> +description: |
> +  StarFive JH71xx SoCs include support for multiple power domains which can be
> +  powered on/off by software based on different application scenes to save power.
> +
> +properties:
> +  compatible:
> +      - enum:

Wrong indentation.

Does not look like you tested the bindings. Please run `make
dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).

> +          - starfive,jh7110-pmu
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  "#power-domain-cells":
> +    const: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - "#power-domain-cells"
> +

Best regards,
Krzysztof




More information about the linux-riscv mailing list