[PATCH v3 11/14] RISC-V: fix auipc-jalr addresses in patched alternatives
Emil Renner Berthing
emil.renner.berthing at canonical.com
Wed Dec 7 03:32:29 PST 2022
On Wed, 7 Dec 2022 at 12:29, Emil Renner Berthing
<emil.renner.berthing at canonical.com> wrote:
>
> On Wed, 30 Nov 2022 at 23:57, Heiko Stuebner <heiko at sntech.de> wrote:
> >
> > From: Heiko Stuebner <heiko.stuebner at vrull.eu>
> >
> > Alternatives live in a different section, so addresses used by call
> > functions will point to wrong locations after the patch got applied.
> >
> > Similar to arm64, adjust the location to consider that offset.
> >
> > Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
> > Signed-off-by: Heiko Stuebner <heiko.stuebner at vrull.eu>
> > ---
> > arch/riscv/include/asm/alternative.h | 3 ++
> > arch/riscv/kernel/alternative.c | 72 ++++++++++++++++++++++++++++
> > arch/riscv/kernel/cpufeature.c | 11 ++++-
> > 3 files changed, 84 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/riscv/include/asm/alternative.h b/arch/riscv/include/asm/alternative.h
> > index 6511dd73e812..c58ec3cc4bc3 100644
> > --- a/arch/riscv/include/asm/alternative.h
> > +++ b/arch/riscv/include/asm/alternative.h
> > @@ -27,6 +27,9 @@ void __init apply_boot_alternatives(void);
> > void __init apply_early_boot_alternatives(void);
> > void apply_module_alternatives(void *start, size_t length);
> >
> > +void riscv_alternative_fix_auipc_jalr(void *alt_ptr, unsigned int len,
> > + int patch_offset);
> > +
> > struct alt_entry {
> > void *old_ptr; /* address of original instruciton or data */
> > void *alt_ptr; /* address of replacement instruction or data */
> > diff --git a/arch/riscv/kernel/alternative.c b/arch/riscv/kernel/alternative.c
> > index a7d26a00beea..292cc42dc3be 100644
> > --- a/arch/riscv/kernel/alternative.c
> > +++ b/arch/riscv/kernel/alternative.c
> > @@ -15,6 +15,8 @@
> > #include <asm/vendorid_list.h>
> > #include <asm/sbi.h>
> > #include <asm/csr.h>
> > +#include <asm/insn.h>
> > +#include <asm/patch.h>
> >
> > struct cpu_manufacturer_info_t {
> > unsigned long vendor_id;
> > @@ -53,6 +55,76 @@ static void __init_or_module riscv_fill_cpu_mfr_info(struct cpu_manufacturer_inf
> > }
> > }
> >
> > +static unsigned int riscv_instruction_at(void *p, unsigned int offset)
> > +{
> > + u16 *parcel = p + (offset * sizeof(u32));
> > +
> > + return (unsigned int)parcel[0] | (unsigned int)parcel[1] << 16;
> > +}
> > +
> > +static inline bool riscv_insn_is_auipc_jalr(u32 insn1, u32 insn2)
> > +{
> > + return riscv_insn_is_auipc(insn1) && riscv_insn_is_jalr(insn2);
> > +}
> > +
> > +#define JALR_SIGN_MASK BIT(RV_I_IMM_SIGN_OPOFF - RV_I_IMM_11_0_OPOFF)
> > +#define AUIPC_PAD (0x00001000)
> > +
> > +#define to_jalr_imm(value) \
> > + ((value & RV_I_IMM_11_0_MASK) << RV_I_IMM_11_0_OPOFF)
> > +
> > +#define to_auipc_imm(value) \
> > + ((value & JALR_SIGN_MASK) ? \
> > + ((value & RV_U_IMM_31_12_MASK) + AUIPC_PAD) : \
> > + (value & RV_U_IMM_31_12_MASK))
> > +
> > +void riscv_alternative_fix_auipc_jalr(void *alt_ptr, unsigned int len,
> > + int patch_offset)
> > +{
> > + int num_instr = len / sizeof(u32);
> > + unsigned int call[2];
> > + int i;
> > + int imm;
> > + u32 rd1;
> > +
> > + /*
> > + * stop one instruction before the end, as we're checking
> > + * for auipc + jalr
> > + */
> > + for (i = 0; i < num_instr - 1; i++) {
> > + u32 inst1 = riscv_instruction_at(alt_ptr, i);
> > + u32 inst2 = riscv_instruction_at(alt_ptr, i + 1);
> > +
> > + if (!riscv_insn_is_auipc_jalr(inst1, inst2))
> > + continue;
> > +
> > + /* call will use ra register */
> > + rd1 = RV_EXTRACT_RD_REG(inst1);
> > + if (rd1 != 1)
> > + continue;
> > +
> > + /* get and adjust new target address */
> > + imm = RV_EXTRACT_UTYPE_IMM(inst1);
> > + imm += RV_EXTRACT_ITYPE_IMM(inst2);
> > + imm -= patch_offset;
> > +
> > + /* pick the original auipc + jalr */
> > + call[0] = inst1;
> > + call[1] = inst2;
> > +
> > + /* drop the old IMMs */
> > + call[0] &= ~(RV_U_IMM_31_12_MASK);
> > + call[1] &= ~(RV_I_IMM_11_0_MASK << RV_I_IMM_11_0_OPOFF);
> > +
> > + /* add the adapted IMMs */
> > + call[0] |= to_auipc_imm(imm);
> > + call[1] |= to_jalr_imm(imm);
>
> It's fine like this, but as explained in
> https://git.kernel.org/torvalds/c/0966d385830de3470b7131db8e86c0c5bc9c52dc
> we can get rid of the conditional by doing
>
> call[0] |= (imm + 0x800) >> 12;
> call[1] |= imm & 0xfff;
Ugh, sorry this is of course wrong. It still needs to take into
account how the immediates are encoded in the instruction, but
calculating the immediates can still be done without a conditional.
> > +
> > + /* patch the call place again */
> > + patch_text_nosync(alt_ptr + i * sizeof(u32), call, 8);
> > + }
> > +}
> > +
> > /*
> > * This is called very early in the boot process (directly after we run
> > * a feature detect on the boot CPU). No need to worry about other CPUs
> > diff --git a/arch/riscv/kernel/cpufeature.c b/arch/riscv/kernel/cpufeature.c
> > index 694267d1fe81..ba62a4ff5ccd 100644
> > --- a/arch/riscv/kernel/cpufeature.c
> > +++ b/arch/riscv/kernel/cpufeature.c
> > @@ -316,8 +316,15 @@ void __init_or_module riscv_cpufeature_patch_func(struct alt_entry *begin,
> > }
> >
> > tmp = (1U << alt->errata_id);
> > - if (cpu_req_feature & tmp)
> > - patch_text_nosync(alt->old_ptr, alt->alt_ptr, alt->alt_len);
> > + if (cpu_req_feature & tmp) {
> > + /* do the basic patching */
> > + patch_text_nosync(alt->old_ptr, alt->alt_ptr,
> > + alt->alt_len);
> > +
> > + riscv_alternative_fix_auipc_jalr(alt->old_ptr,
> > + alt->alt_len,
> > + alt->old_ptr - alt->alt_ptr);
> > + }
> > }
> > }
> > #endif
> > --
> > 2.35.1
> >
More information about the linux-riscv
mailing list