[PATCH v15 3/9] genirq: Add mechanism to multiplex a single HW IPI
Anup Patel
apatel at ventanamicro.com
Mon Dec 5 00:46:59 PST 2022
On Mon, Dec 5, 2022 at 12:50 PM Hector Martin <marcan at marcan.st> wrote:
>
> On 03/12/2022 15.46, Anup Patel wrote:
> > All RISC-V platforms have a single HW IPI provided by the INTC local
> > interrupt controller. The HW method to trigger INTC IPI can be through
> > external irqchip (e.g. RISC-V AIA), through platform specific device
> > (e.g. SiFive CLINT timer), or through firmware (e.g. SBI IPI call).
> >
> > To support multiple IPIs on RISC-V, add a generic IPI multiplexing
> > mechanism which help us create multiple virtual IPIs using a single
> > HW IPI. This generic IPI multiplexing is inspired by the Apple AIC
> > irqchip driver and it is shared by various RISC-V irqchip drivers.
> >
> > Signed-off-by: Anup Patel <apatel at ventanamicro.com>
> > ---
> > include/linux/irq.h | 3 +
> > kernel/irq/Kconfig | 5 ++
> > kernel/irq/Makefile | 1 +
> > kernel/irq/ipi-mux.c | 207 +++++++++++++++++++++++++++++++++++++++++++
> > 4 files changed, 216 insertions(+)
> > create mode 100644 kernel/irq/ipi-mux.c
> >
> > diff --git a/include/linux/irq.h b/include/linux/irq.h
> > index c3eb89606c2b..b1b28affb32a 100644
> > --- a/include/linux/irq.h
> > +++ b/include/linux/irq.h
> > @@ -1266,6 +1266,9 @@ int __ipi_send_mask(struct irq_desc *desc, const struct cpumask *dest);
> > int ipi_send_single(unsigned int virq, unsigned int cpu);
> > int ipi_send_mask(unsigned int virq, const struct cpumask *dest);
> >
> > +void ipi_mux_process(void);
> > +int ipi_mux_create(unsigned int nr_ipi, void (*mux_send)(unsigned int cpu));
> > +
> > #ifdef CONFIG_GENERIC_IRQ_MULTI_HANDLER
> > /*
> > * Registers a generic IRQ handling function as the top-level IRQ handler in
> > diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig
> > index db3d174c53d4..df17dbc54b02 100644
> > --- a/kernel/irq/Kconfig
> > +++ b/kernel/irq/Kconfig
> > @@ -86,6 +86,11 @@ config GENERIC_IRQ_IPI
> > depends on SMP
> > select IRQ_DOMAIN_HIERARCHY
> >
> > +# Generic IRQ IPI Mux support
> > +config GENERIC_IRQ_IPI_MUX
> > + bool
> > + depends on SMP
> > +
> > # Generic MSI interrupt support
> > config GENERIC_MSI_IRQ
> > bool
> > diff --git a/kernel/irq/Makefile b/kernel/irq/Makefile
> > index b4f53717d143..f19d3080bf11 100644
> > --- a/kernel/irq/Makefile
> > +++ b/kernel/irq/Makefile
> > @@ -15,6 +15,7 @@ obj-$(CONFIG_GENERIC_IRQ_MIGRATION) += cpuhotplug.o
> > obj-$(CONFIG_PM_SLEEP) += pm.o
> > obj-$(CONFIG_GENERIC_MSI_IRQ) += msi.o
> > obj-$(CONFIG_GENERIC_IRQ_IPI) += ipi.o
> > +obj-$(CONFIG_GENERIC_IRQ_IPI_MUX) += ipi-mux.o
> > obj-$(CONFIG_SMP) += affinity.o
> > obj-$(CONFIG_GENERIC_IRQ_DEBUGFS) += debugfs.o
> > obj-$(CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR) += matrix.o
> > diff --git a/kernel/irq/ipi-mux.c b/kernel/irq/ipi-mux.c
> > new file mode 100644
> > index 000000000000..3a403c3a785d
> > --- /dev/null
> > +++ b/kernel/irq/ipi-mux.c
> > @@ -0,0 +1,207 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +/*
> > + * Multiplex several virtual IPIs over a single HW IPI.
> > + *
> > + * Copyright The Asahi Linux Contributors
> > + * Copyright (c) 2022 Ventana Micro Systems Inc.
> > + */
> > +
> > +#define pr_fmt(fmt) "ipi-mux: " fmt
> > +#include <linux/cpu.h>
> > +#include <linux/init.h>
> > +#include <linux/irq.h>
> > +#include <linux/irqchip.h>
> > +#include <linux/irqchip/chained_irq.h>
> > +#include <linux/irqdomain.h>
> > +#include <linux/jump_label.h>
> > +#include <linux/percpu.h>
> > +#include <linux/smp.h>
> > +
> > +struct ipi_mux_cpu {
> > + atomic_t enable;
> > + atomic_t bits;
> > +};
> > +
> > +static struct ipi_mux_cpu __percpu *ipi_mux_pcpu;
> > +static struct irq_domain *ipi_mux_domain;
> > +static void (*ipi_mux_send)(unsigned int cpu);
> > +
> > +static void ipi_mux_mask(struct irq_data *d)
> > +{
> > + struct ipi_mux_cpu *icpu = this_cpu_ptr(ipi_mux_pcpu);
> > +
> > + atomic_andnot(BIT(irqd_to_hwirq(d)), &icpu->enable);
> > +}
> > +
> > +static void ipi_mux_unmask(struct irq_data *d)
> > +{
> > + struct ipi_mux_cpu *icpu = this_cpu_ptr(ipi_mux_pcpu);
> > + u32 ibit = BIT(irqd_to_hwirq(d));
> > +
> > + atomic_or(ibit, &icpu->enable);
> > +
> > + /*
> > + * The atomic_or() above must complete before the atomic_read()
> > + * below to avoid racing ipi_mux_send_mask().
> > + */
> > + smp_mb__after_atomic();
> > +
> > + /* If a pending IPI was unmasked, raise a parent IPI immediately. */
> > + if (atomic_read(&icpu->bits) & ibit)
> > + ipi_mux_send(smp_processor_id());
> > +}
> > +
> > +static void ipi_mux_send_mask(struct irq_data *d, const struct cpumask *mask)
> > +{
> > + struct ipi_mux_cpu *icpu = this_cpu_ptr(ipi_mux_pcpu);
> > + u32 ibit = BIT(irqd_to_hwirq(d));
> > + unsigned long pending;
> > + int cpu;
> > +
> > + for_each_cpu(cpu, mask) {
> > + icpu = per_cpu_ptr(ipi_mux_pcpu, cpu);
> > +
> > + /*
> > + * This sequence is the mirror of the one in ipi_mux_unmask();
> > + * see the comment there. Additionally, release semantics
> > + * ensure that the vIPI flag set is ordered after any shared
> > + * memory accesses that precede it. This therefore also pairs
> > + * with the atomic_fetch_andnot in ipi_mux_process().
> > + */
> > + pending = atomic_fetch_or_release(ibit, &icpu->bits);
> > +
> > + /*
> > + * The atomic_fetch_or_release() above must complete
> > + * before the atomic_read() below to avoid racing with
> > + * ipi_mux_unmask().
> > + */
> > + smp_mb__after_atomic();
> > +
> > + /*
> > + * The flag writes must complete before the physical IPI is
> > + * issued to another CPU. This is implied by the control
> > + * dependency on the result of atomic_read() below, which is
> > + * itself already ordered after the vIPI flag write.
> > + */
> > + if (!(pending & ibit) && (atomic_read(&icpu->enable) & ibit))
> > + ipi_mux_send(cpu);
> > + }
> > +}
> > +
> > +static const struct irq_chip ipi_mux_chip = {
> > + .name = "IPI Mux",
> > + .irq_mask = ipi_mux_mask,
> > + .irq_unmask = ipi_mux_unmask,
> > + .ipi_send_mask = ipi_mux_send_mask,
> > +};
> > +
> > +static int ipi_mux_domain_alloc(struct irq_domain *d, unsigned int virq,
> > + unsigned int nr_irqs, void *arg)
> > +{
> > + int i;
> > +
> > + for (i = 0; i < nr_irqs; i++) {
> > + irq_set_percpu_devid(virq + i);
> > + irq_domain_set_info(d, virq + i, i, &ipi_mux_chip, NULL,
> > + handle_percpu_devid_irq, NULL, NULL);
> > + }
> > +
> > + return 0;
> > +}
> > +
> > +static const struct irq_domain_ops ipi_mux_domain_ops = {
> > + .alloc = ipi_mux_domain_alloc,
> > + .free = irq_domain_free_irqs_top,
> > +};
> > +
> > +/**
> > + * ipi_mux_process - Process multiplexed virtual IPIs
> > + */
> > +void ipi_mux_process(void)
> > +{
> > + struct ipi_mux_cpu *icpu = this_cpu_ptr(ipi_mux_pcpu);
> > + irq_hw_number_t hwirq;
> > + unsigned long ipis;
> > + unsigned int en;
> > +
> > + /*
> > + * Reading enable mask does not need to be ordered as long as
> > + * this function is called from interrupt handler because only
> > + * the CPU itself can change it's own enable mask.
> > + */
> > + en = atomic_read(&icpu->enable);
> > +
> > + /*
> > + * Clear the IPIs we are about to handle. This pairs with the
> > + * atomic_fetch_or_release() in ipi_mux_send_mask().
> > + */
> > + ipis = atomic_fetch_andnot(en, &icpu->bits) & en;
> > +
> > + for_each_set_bit(hwirq, &ipis, BITS_PER_TYPE(int))
> > + generic_handle_domain_irq(ipi_mux_domain, hwirq);
> > +}
> > +
> > +/**
> > + * ipi_mux_create - Create virtual IPIs multiplexed on top of a single
> > + * parent IPI.
> > + * @nr_ipi: number of virtual IPIs to create. This should
> > + * be <= BITS_PER_TYPE(int)
> > + * @mux_send: callback to trigger parent IPI for a particular CPU
> > + *
> > + * Returns first virq of the newly created virtual IPIs upon success
> > + * or <=0 upon failure
> > + */
> > +int ipi_mux_create(unsigned int nr_ipi, void (*mux_send)(unsigned int cpu))
> > +{
> > + struct fwnode_handle *fwnode;
> > + struct irq_domain *domain;
> > + int rc;
> > +
> > + if (ipi_mux_domain)
> > + return -EEXIST;
> > +
> > + if (BITS_PER_TYPE(int) < nr_ipi || !mux_send)
> > + return -EINVAL;
> > +
> > + ipi_mux_pcpu = alloc_percpu(typeof(*ipi_mux_pcpu));
> > + if (!ipi_mux_pcpu)
> > + return -ENOMEM;
> > +
> > + fwnode = irq_domain_alloc_named_fwnode("IPI-Mux");
> > + if (!fwnode) {
> > + pr_err("unable to create IPI Mux fwnode\n");
> > + rc = -ENOMEM;
> > + goto fail_free_cpu;
> > + }
> > +
> > + domain = irq_domain_create_linear(fwnode, nr_ipi,
> > + &ipi_mux_domain_ops, NULL);
> > + if (!domain) {
> > + pr_err("unable to add IPI Mux domain\n");
> > + rc = -ENOMEM;
> > + goto fail_free_fwnode;
> > + }
> > +
> > + domain->flags |= IRQ_DOMAIN_FLAG_IPI_SINGLE;
> > + irq_domain_update_bus_token(domain, DOMAIN_BUS_IPI);
> > +
> > + rc = __irq_domain_alloc_irqs(domain, -1, nr_ipi,
> > + NUMA_NO_NODE, NULL, false, NULL);
> > + if (rc <= 0) {
> > + pr_err("unable to alloc IRQs from IPI Mux domain\n");
> > + goto fail_free_domain;
> > + }
> > +
> > + ipi_mux_domain = domain;
> > + ipi_mux_send = mux_send;
> > +
> > + return rc;
> > +
> > +fail_free_domain:
> > + irq_domain_remove(domain);
> > +fail_free_fwnode:
> > + irq_domain_free_fwnode(fwnode);
> > +fail_free_cpu:
> > + free_percpu(ipi_mux_pcpu);
> > + return rc;
> > +}
>
> Reviewed-by: Hector Martin <marcan at marcan.st>
> Tested-by: Hector Martin <marcan at marcan.st>
>
> I was actually surprised this wasn't already a solved problem when I
> first had to write this code. Glad RISC-V found it useful :)
>
> Note: we agonized over the memory ordering here quite a bit when this
> was first written, and all that was viewed through the lens of the ARM64
> memory model. You might want to do a similarly thorough review from a
> RISC-V perspective to make sure it isn't relying on any ARMisms (or that
> RISC-V isn't failing to meet the underlying Linux model - we already ran
> into a core kernel bitop issue once for ARM too!).
>
Thanks, your work is certainly useful to the RISC-V. We already have
three RISC-V irqchip drivers (SBI IPI, CLINT,and IMSIC) which benefit
from this code. The RISC-V IMSIC driver was recently submitted on
LKML whereas the other two are already used on existing platforms.
Regarding memory-model, RISC-V platforms by default have weak
memory ordering (same as ARM). We also have optional TSO extension
but currently there are no platforms implementing it.
Regarding atomics used in this patch, there is only one difference
in atomic_fetch_or_release() where RISC-V implements it as
__atomic_release_fence() plus atomic_fetch_or_relaxed().
Regards,
Anup
More information about the linux-riscv
mailing list