[PATCH v5 2/3] dt-bindings: timer: Add bindings for the RISC-V timer device
Anup Patel
apatel at ventanamicro.com
Thu Dec 1 04:39:53 PST 2022
We add DT bindings for a separate RISC-V timer DT node which can
be used to describe implementation specific behaviour (such as
timer interrupt not triggered during non-retentive suspend).
Signed-off-by: Anup Patel <apatel at ventanamicro.com>
Reviewed-by: Conor Dooley <conor.dooley at microchip.com>
Acked-by: Palmer Dabbelt <palmer at rivosinc.com>
---
.../bindings/timer/riscv,timer.yaml | 52 +++++++++++++++++++
1 file changed, 52 insertions(+)
create mode 100644 Documentation/devicetree/bindings/timer/riscv,timer.yaml
diff --git a/Documentation/devicetree/bindings/timer/riscv,timer.yaml b/Documentation/devicetree/bindings/timer/riscv,timer.yaml
new file mode 100644
index 000000000000..38d67e1a5a79
--- /dev/null
+++ b/Documentation/devicetree/bindings/timer/riscv,timer.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/riscv,timer.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: RISC-V timer
+
+maintainers:
+ - Anup Patel <anup at brainfault.org>
+
+description: |+
+ RISC-V platforms always have a RISC-V timer device for the supervisor-mode
+ based on the time CSR defined by the RISC-V privileged specification. The
+ timer interrupts of this device are configured using the RISC-V SBI Time
+ extension or the RISC-V Sstc extension.
+
+ The clock frequency of RISC-V timer device is specified via the
+ "timebase-frequency" DT property of "/cpus" DT node which is described
+ in Documentation/devicetree/bindings/riscv/cpus.yaml
+
+properties:
+ compatible:
+ enum:
+ - riscv,timer
+
+ interrupts-extended:
+ minItems: 1
+ maxItems: 4096 # Should be enough?
+
+ riscv,timer-cannot-wake-cpu:
+ type: boolean
+ description:
+ If present, the timer interrupt cannot wake up the CPU from one or
+ more suspend/idle states.
+
+additionalProperties: false
+
+required:
+ - compatible
+ - interrupts-extended
+
+examples:
+ - |
+ timer {
+ compatible = "riscv,timer";
+ interrupts-extended = <&cpu1intc 5>,
+ <&cpu2intc 5>,
+ <&cpu3intc 5>,
+ <&cpu4intc 5>;
+ };
+...
--
2.34.1
More information about the linux-riscv
mailing list