[PATCH 1/2] dt-bindings: phy: qcom,qmp: Add QCM2290 USB3 PHY

[Shawn Guo]

Add support for USB3 PHY found on Qualcomm QCM2290 SoC.

Signed-off-by: Shawn Guo <shawn.guo at linaro.org>
---
 .../devicetree/bindings/phy/qcom,qmp-phy.yaml | 27 +++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
index 75be5650a198..4e7371956ed4 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
@@ -27,6 +27,7 @@ properties:
       - qcom,msm8998-qmp-pcie-phy
       - qcom,msm8998-qmp-ufs-phy
       - qcom,msm8998-qmp-usb3-phy
+      - qcom,qcm2290-qmp-usb3-phy
       - qcom,sc7180-qmp-usb3-phy
       - qcom,sc8180x-qmp-pcie-phy
       - qcom,sc8180x-qmp-ufs-phy
@@ -414,6 +415,32 @@ allOf:
           items:
             - const: phy
             - const: common
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,qcm2290-qmp-usb3-phy
+    then:
+      properties:
+        clocks:
+          items:
+            - description: Phy config clock.
+            - description: 19.2 MHz ref clk.
+            - description: Phy common block aux clock.
+        clock-names:
+          items:
+            - const: cfg_ahb
+            - const: ref
+            - const: com_aux
+        resets:
+          items:
+            - description: phy_phy reset.
+            - description: reset of phy block.
+        reset-names:
+          items:
+            - const: phy_phy
+            - const: phy
 
 examples:
   - |
-- 
2.17.1