[RFC PATCH net-next 05/12] reset: lan966x: Add switch reset driver

[Horatiu Vultur]

The 09/20/2021 14:11, Andrew Lunn wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you know the content is safe
> 
> On Mon, Sep 20, 2021 at 11:52:11AM +0200, Horatiu Vultur wrote:
> > The lan966x switch SoC has a number of components that can be reset
> > indiviually, but at least the switch core needs to be in a well defined
> > state at power on, when any of the lan966x drivers starts to access the
> > switch core, this reset driver is available.
> >
> > The reset driver is loaded early via the postcore_initcall interface, and
> > will then be available for the other lan966x drivers (SGPIO, SwitchDev etc)
> > that are loaded next, and the first of them to be loaded can perform the
> > one-time switch core reset that is needed.
> 
> A lot of this looks very similar to
> reset-microchip-sparx5.c. PROTECT_REG is 0x88 rather than 0x84, but
> actually using the value is the same. SOFT_RESET_REG is identical.  So
> rather than adding a new driver, maybe you can generalize
> reset-microchip-sparx5.c, and add a second compatible string?

You are right, they look similar.
I will try to add a new compatible string.

> 
>         Andrew

-- 
/Horatiu